Guaranteeing synchronous message deadlines with the timed token medium access control protocol

We study the problem of guaranteeing synchronous message deadlines in token ring networks where the timed token medium access control protocol is employed. Synchronous capacity, defined as the maximum time for which a node can transmit its synchronous messages every time it receives the token, is a key parameter in the control of synchronous message transmission. To ensure the transmission of synchronous messages before their deadlines, synchronous capacities must be properly allocated to individual nodes. We address the issue of appropriate allocation of the synchronous capacities. Several synchronous capacity allocation schemes are analyzed in terms of their ability to satisfy deadline constraints of synchronous messages. We show that an inappropriate allocation of the synchronous capacities could cause message deadlines to be missed even if the synchronous traffic is extremely low. We propose a scheme called the normalized proportional allocation scheme which can guarantee the synchronous message deadlines for synchronous traffic of up to 33 percent of available utilization. To date, no other synchronous capacity allocation scheme has been reported to achieve such substantial performance. Another major contribution of this paper is an extension to the previous work on the bounded token rotation time. We prove that the time elapsed between any consecutive visits to a particular node is bounded by upsilon TTRT, where TTRT is the target token rotation time set up at system initialization time. The previous result by Johnson and Sevcik is a special case where upsilon = 2. We use this result in the analysis of various synchronous allocation schemes. It can also be applied in other similar studies

Design and Analysis of RT-Ring: A Protocol for Supporting Real-Time Communications

Distributed applications with quality of service (QoS) requirements are more and more used in several areas (e.g., automated factory networks, embedded systems, conferencing systems). These applications produce a type of traffic with hard timing requirements, i.e., transmissions must be completed within specified deadlines. To handle these transmissions, the communication system must use real-time protocols to provide a communication service that is able to satisfy the QoS requirements of the distributed applications. In this paper, we propose a new real-time protocol, called RT-Ring, able to support transmissions of both real-time and generic traffic over a ring network. RT-Ring provides both network guarantees and high network resource utilization, while ensuring the compatibility with the emerging differentiated service architectures. Network guarantees are fully proved and high network utilization is highlighted by a comparative study with the FDDI protocol. This comparison shows that RT-Ring network capacities are greater than the corresponding FDDI capacities. In fact, by assuming the FDDI frames with a length equal to the RT-Ring slot size and by using the same traffic load we show that the capacities of FDDI are equal to the lower bound capacities of RT-Ring. Index Terms Real-time protocol, quality of service (QoS) traffic, worst case analysis

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 1: Army fault tolerant architecture overview

Digital computing systems needed for Army programs such as the Computer-Aided Low Altitude Helicopter Flight Program and the Armored Systems Modernization (ASM) vehicles may be characterized by high computational throughput and input/output bandwidth, hard real-time response, high reliability and availability, and maintainability, testability, and producibility requirements. In addition, such a system should be affordable to produce, procure, maintain, and upgrade. To address these needs, the Army Fault Tolerant Architecture (AFTA) is being designed and constructed under a three-year program comprised of a conceptual study, detailed design and fabrication, and demonstration and validation phases. Described here are the results of the conceptual study phase of the AFTA development. Given here is an introduction to the AFTA program, its objectives, and key elements of its technical approach. A format is designed for representing mission requirements in a manner suitable for first order AFTA sizing and analysis, followed by a discussion of the current state of mission requirements acquisition for the targeted Army missions. An overview is given of AFTA's architectural theory of operation

General schedulability bound analysis and its applications in real-time systems

Real-time system refers to the computing, communication, and information system with deadline requirements. To meet these deadline requirements, most systems use a mechanism known as the schedulability test which determines whether each of the admitted tasks can meet its deadline. A new task will not be admitted unless it passes the schedulability test. Schedulability tests can be either direct or indirect. The utilization based schedulability test is the most common schedulability test approach, in which a task can be admitted only if the total system utilization is lower than a pre-derived bound. While the utilization bound based schedulability test is simple and effective, it is often difficult to derive the bound. For its analytical complexity, utilization bound results are usually obtained on a case-by-case basis. In this dissertation, we develop a general framework that allows effective derivation of schedulability bounds for different workload patterns and schedulers. We introduce an analytical model that is capable of describing a wide range of tasks' and schedulers'ÃÂÃÂ behaviors. We propose a new definition of utilization, called workload rate. While similar to utilization, workload rate enables flexible representation of different scheduling and workload scenarios and leads to uniform proof of schedulability bounds. We introduce two types of workload constraint functions, s-shaped and r-shaped, for flexible and accurate characterization of the task workloads. We derive parameterized schedulability bounds for arbitrary static priority schedulers, weighted round robin schedulers, and timed token ring schedulers. Existing utilization bounds for these schedulers are obtained from the closed-form formula by direct assignment of proper parameters. Some of these results are applied to a cluster computing environment. The results developed in this dissertation will help future schedulability bound analysis by supplying a unified modeling framework and will ease the implementation practical real-time systems by providing a set of ready to use bound results

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

Real-Time Communication in Packet-Switched Networks

Abstract The dramatically increased bandwidths and processing capabilities of future high-speed networks make possible many distributed real-time applications, such as sensor-based applications and multimedia services. Since these applications will have tra c characteristics and performance requirements that di er dramatically from those of current data-oriented applications, new communication network architectures and protocols will be required. In this paper we discuss the performance requirements and tra c characteristics of various real-time applications, survey recent developments in the areas of network architecture and protocols for supporting real-time services, and develop frameworks in which these, and future, research e orts can be considered

Using the ethernet protocol for real-time communications in embedded systems

Doutoramento em Engenharia ElectrotécnicaOs Sistemas Computacionais de Controlo Distribuído (SCCD) estão muito disseminados em aplicações que vão desde o controlo de processos e manufactura a automóveis, aviões e robôs. Muitas aplicações são de natureza tempo-real, ou seja, impõem fortes restrições às propriedades subjacentes aos sistemas de controlo, gerando a necessidade de fornecer um comportamento temporal previsível durante períodos alargados de tempo. Em particular, dependendo da aplicação, uma falha em garantir as restrições pode causar importantes perdas económicas ou mesmo pôr vidas humanas em risco. Actualmente, a quantidade e funcionalidade dos modernos SCCD têm crescido firmemente. Esta evolução é motivada por uma nova classe de aplicações que requer maior demanda de recursos tais como aplicações de multimedia (por exemplo visão), bem como pela tendência em usar grande número de processadres simples e interconectados, em vez de poucos e poderosos processadores, encapsulando cada funcionalidade num único processador. Consequentemente, a quantidade de informação que deve ser trocada entre os nós da rede também cresceu drasticamente nos últimos anos e está agora atingindo os limites que podem ser obtidos por tradicionais barramentos de campo, como por exempo CAN, WorldFIP, PROFIBUS. Outras alternativas são pois requeridas para suportar a necessidade de largura de banda e a manutenção de exigências dos sistemas de comunicação tempo-real: previsibilidade, pontualidade, atraso e variação de período limitados. Uma das linhas de trabalho tem apostado na Ethernet, tirando vantagem dos baixos custos dos circuitos, da elevada largura de banda, da fácil integração com a Internet, e da simplicidade em promover expansões e compatibilidade com redes usadas na estrutura administrativa das empresas industriais. Porém, o mecanismo padronizado de acesso ao meio da Ethernet (CSMA/CD) é destrutivo e não determinístico, o que impede seu uso directo ao nível de campo ou pelo menos em aplicações de comunicação tempo-real. Apesar disso, muitas abordagens diferentes têm sido propostas e usadas para obter comportamento tempo-real em Ethernet. As abordagens actuais para dotar de comportamento tempo-real Ethernet partilhada apresentam desvantagens tais como: exigência de hardware especializado, fornecimento de garantias temporais estatísticas, ineficiência na utilização da largura de banda ou na reposta tempo-real. São ainda por vezes inflexíveis com respeito às propriedades de tráfego bem como com as políticas de escalonamento. Podem exigir processadores com elevado poder de cálculo. Finalmente não permitem que estações tempo-real possam coexistir com estações Ethernet standard no mesmo segmento. Uma proposta recente, o algoritmo hBEB, permite a coexistência de estações tempo-real e standard no mesmo segmento. Contudo, apenas uma estação tempo-real pode estar activa, o que é inaceitável para aplicações de automação e controlo. Esta tese discute uma nova solução para promover tempo-real em Ethernet partilhada, baseando-se na passagem implícita de testemunho de forma similar à usada pelo protocolo P-NET. Esta técnica é um mecanismo de acesso ao meio físico pouco exigente em termos de processamento, sendo portanto adequada para implementar uma rede de dispositivos baseados em processadores de baixo poder de cálculo e controladores Ethernet standard. Esta tese apresenta ainda uma proposta de implementação do VTPE em IP core para superar algumas dificuldades derivadas de funcionalidades que não são suportadas por controladores standard, nomeadamente a arbitragem do meio físico durante a transmissão de uma trama. Esta nova proposta pode aumentar muito a eficiência do VTPE no uso da largura de banda. O VTPE, assim como P-NET ou protocolos similares, permite a uma estação apenas comunicar uma vez por cada circulação do testemunho. Esta imposição pode causar bloqueios de comunicação por períodos inaceitáveis em aplicações com tráfego isócrono, por exemplo multimedia. Uma solução proposta permite que uma estação possa aceder ao meio físico mais de uma vez por cada circulação do token. Os resultados experimentais a as análises desenvolvidas mostram que o bloqueio pode ser drasticamente reduzido. Por último esta tese discute uma variante do protocolo VTPE, o VTPE/h- BEB, que permite que mais de uma estação hBEB possa coexistir com diversas estações Ethernet standard num mesmo segmento partilhado. Um demonstrador para prova de conceito bem como uma aplicação foram também implementados.Distributed Computer-Control Systems (DCCS) are widely disseminated in applications ranging from automation and control to automotive, avionics and robotics. Many of these applications are real-time, posing stringent constraints to the properties of underlying control systems, which arise from the need to provide predictable behaviour during extended time periods. Depending on the particular type of application, a failure to meet these constraints can cause important economic losses or can even put human life in risk. Currently the number and functionality of modern DCCSs have been increasing steadily. This evolution has been motivated for a new class of applications of more resource demanding applications, such as multimedia (e.g. machine vision), as well as by the trend to use large numbers of simple interconnected processors, instead of a few powerful ones, encapsulating each functionality in one single processor. Consequently, the amount of information that must be exchanged among the network nodes has also increased dramatically and is now reaching the limits achievable by traditional fieldbuses. Therefore, other alternatives are required to support higher bandwidth demands while keeping the main requirements of a real-time communication system: predictability, timeliness, bounded delays and jitter. Efforts have been made with Ethernet to take advantage of the low cost of the silicon, high bandwidth, easy integration with the Internet, easy expansion and compatibility with the networks used at higher layers in the factory structure. However its standardized media access control (CSMA/CD) is destructive and not deterministic, impairing its direct use at field level at least for real-time communication. Despite this, many solutions have been proposed to achieve real-time behavior in Ethernet. However they present several disadvantages: requiring specialized hardware, providing statistical timeliness guarantees only, being bandwidth or response-time inefficient, being inflexible concerning traffic properties and/or scheduling policy, or finally not allowing real-time stations to coexist with standard Ethernet stations in the same segment. A recent proposal, the hBEB algorithm, allows the coexistence of real-time and standard Ethernet stations in the same shared segment. However hBEB limits at most one real-time station per segment which is unacceptable for applications in industrial automation and process control. This thesis discusses a new real-time shared Ethernet solution based on the virtual token passing technique similarly to the one used by the P-NET protocol. This technique is a medium access control mechanism that requires small processing power, being suitable to implement devices based on processors with small processing power. The solution is called Virtual Token Passing Ethernet or VTPE. This proposal discusses the modifications required in the Ethernet frame format, the temporal analysis to guarantee real-time communication and the implementation of two demonstrators based on microcontrollers and standard Ethernet controllers. This thesis also presents a proposal to implement VTPE in an IP Core to overcome some difficulties derived from limitations of standard Ethernet controllers, namely to allow medium access control during a frame transmission. This proposal can increase the bandwidth efficiency of VTPE. VTPE, as well as P-NET or any other protocol based on circular token rotation technique, only allows a station to communicate once for each token round. This design imposition can cause unacceptable communication blocking in applications with isochronous traffic such as multimedia. An improvement in the VTPE proposal enables a station to access the medium more than once per token round. The experimental results as well as the temporal analysis show that the blocking can be drastically reduced. This improvement can also be used in the P-NET protocol. Finally this thesis proposes a variant of VTPE, named VTPE/hBEB, to be implemented in Ethernet controllers that are able to support the hBEB algorithm. The VTPE/hBEB allows more than one hBEB station to coexist with several standard Ethernet stations in the same shared Ethernet segment. A demonstrator for the VTPE/hBEB validation, as well as an application, are also presented and discussed