Improving the Spectral Efficiency of Modulation on Conjugate-Reciprocal Zeros (MOCZ) for Non-Coherent Short Packet Communications

Future internet of things (IoT) applications need to meet the stringent requirements of ultra high reliability and ultra low-latency. To meet the ultra low-latency requirements, the IoT networks will be employing the short data packets for data transmission between the devices. Employing the short data packet communications (SPCs) is not straightforward as there are several design problems related to the SPCs which still remain unsolved. Since the block length for SPCs is finite; the channel estimation is a challenging problem. This is because the conventionally used known pilot symbols to estimate the channel will severely degrade the spectral efficiency of SPCs. Recently a novel non-coherent modulation technique named as modulation on conjugate reciprocal zeros (MOCZ) was proposed which supports the blind detection of transmitted data, i.e., detection without the knowledge of channel. It is also well known that SPCs suffers from data rate loss as compared to the channel capacity limit. Hence, in this thesis, we aim to increase the spectral efficiency of MOCZ. We improve the spectral efficiency of MOCZ by proposing a technique named as spectrally efficient modulation on conjugate reciprocal zeros (SE-MOCZ) which combines MOCZ with a technique named as faster than Nyquist (FTN) Signaling. Hence; in SE-MOCZ, we end up transmitting the coefficients of MOCZ, modulated on T-orthogonal pulses, at a rate faster than the Nyquist limit, i.e., τT, instead of T, where 0 < τ < 1. That said, we intentionally introduce inter symbol interference (ISI) between the received samples of SE MOCZ. To partially remove the ISI, we introduce a discrete-time filter at the receiver. We further optimize the radius of complex zeros of SE-MOCZ in the presence of ISI. Simulation results show the gains of proposed SE-MOCZ in terms of spectral efficiency

Cost-Effective Spectrally-Efficient Optical Transceiver Architectures for Metropolitan and Regional Links

The work presented herein explores cost-effective optical transceiver architectures for access, metropolitan and regional links. The primary requirement in such links is cost-effectiveness and secondly, spectral efficiency. The bandwidth/data demand is driven by data-intensive Internet applications, such as cloud-based services and video-on-demand, and is rapidly increasing in access and metro links. Therefore, cost-effective optical transceiver architectures offering high information spectral densities (ISDs > 1(b/s)/Hz) need to be implemented over metropolitan distances. Then, a key question for each link length and application is whether coherent- or direct (non-coherent) detection technology offers the best cost and performance trade-off. The performance and complexity limits of both technologies have been studied. Single polarization direct detection transceivers have been reviewed, focusing on their achievable ISDs and reach. It is concluded that subcarrier modulation (SCM) technique combined with single sideband (SSB) and high-order quadrature amplitude modulation (QAM) signaling, enabled by digital signal processing (DSP) based optical transceivers, must be implemented in order to exceed an ISD of 1 (b/s)/Hz in direct-detection links. The complexity can be shifted from the optical to the electrical domain using such transceivers, and hence, the cost can be minimized. In this regard, a detailed performance comparison of two spectrally-efficient direct detection SCM techniques, namely Nyquist-SCM and OFDM, is presented by means of simulations. It is found out that Nyquist-SCM format offers the transmission distances more than double that of OFDM due to its higher resilience to signal-signal beating interference. Following this, dispersion-precompensated SSB 4- and 16-QAM Nyquist-SCM signal formats were experimentally demonstrated using in-phase and quadrature (IQ)-modulators at net optical ISDs of 1.2 and 2 (b/s)/Hz over 800 km and 323 km of standard single-mode fibre (SSMF), respectively. These demonstrations represent record net optical ISDs over such distances among the reported single polarization wavelength division multiplexed (WDM) systems. Furthermore, since the cost-effectiveness is crucial, the optical complexity of Nyquist-SCM transmitters can be significantly reduced by using low-cost modulators and high-linewidth lasers. A comprehensive theoretical study on SSB signal generation using IQ- and dual-drive Mach-Zehnder modulators (DD-MZMs) was carried out to assess their performance for WDM direct detection links. This was followed by an experimental demonstration of WDM transmission over 242 km of SSMF with a net optical ISD of 1.5 (b/s)/Hz, the highest achieved ISD using a DD-MZM-based transmitter. Following the assessment of direct detection technology using various transmitter designs, cost-effective simplified coherent receiver architectures for access and metro networks have been investigated. The optical complexity of the conventional (polarization- and phase-diverse) coherent receiver is significantly simplified, i.e., consisting of a single 3 dB coupler and balanced photodetector, utilizing heterodyne reception and Alamouti polarization-time block coding. Although the achievable net optical ISD is halved compared to a conventional coherent receiver due to Alamouti coding, its receiver sensitivity provides significant gain over a direct detection receiver at M-ary QAM formats where M ≥16

Design and analysis of a high-rate acoustic link for underwater video transmission

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 2004.Includes bibliographical references (leaves 74-75).A high bit rate acoustic link for underwater video transmission is examined. Currently, encoding standards support video transmission at bit rates as low as 64 kbps. While this rate is still above the limit of commercially available acoustic modems, prototype acoustic modems based on phase coherent modulation/detection have demonstrated successful transmission at 30 kbps over a deep water channel. The key to bridging the remaining gap between the bit-rate needed for video transmission and that supported by the acoustic channel lies in two approaches: use of efficient image/video compression algorithms and use of high-level bandwidth-efficient modulation methods. An experimental system, based on discrete cosine transform (DCT) and Huffman entropy coding for image compression, and variable rate M-ary quadrature amplitude modulation (QAM) was implemented. Phase-coherent equalization is accomplished by joint operation of a decision feedback equalizer (DFE) and a second order phase locked loop (PLL). System performance is demonstrated experimentally, using transmission rate of 25000 symbols/sec at a carrier frequency of 75 kHz over a 10 m vertical path.(cont.) Excellent results were obtained, thus demonstrating bit rates as high as 150 kbps, which are sufficient for real-time transmission of compressed video. As an alternative to conventional QAM signaling, whose high-level constellations are sensitive to phase distortions induced by the channel, M-ary differential amplitude and phase shift keying (DAPSK) was used. DAPSK does not require explicit carrier phase synchronization at the receiver, but instead relies on simple differentially coherent detection. Receiver processing includes a linear equalizer whose coefficients are adjusted using a modified linear least square (LMS) algorithm. Simulation results confirm good performance of the differentially coherent equalization scheme employed.by Konstantinos Pelekanakis.S.M

Coherent Phase-Modulated Optical Fiber Communications with Linear and Nonlinear Phase Noise

Ph.DDOCTOR OF PHILOSOPH

Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems

206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo

New advances in synchronization of digital communication receivers

Synchronization is a challenging but very important task in communications. In digital communication systems, a hierarchy of synchronization problems has to be considered: carrier synchronization, symbol timing synchronization and frame synchronization. For bandwidth efficiency and burst transmission reasons, the former two synchronization steps tend to favor non-data aided (NDA or blind) techniques, while in general, the last one is usually solved by inserting repetitively known bits or words into the data sequence, and is referred to as a data-aided (DA) approach. Over the last two decades, extensive research work has been carried out to design nondata-aided timing recovery and carrier synchronization algorithms. Despite their importance and spread use, most of the existing blind synchronization algorithms are derived in an ad-hoc manner without exploiting optimally the entire available statistical information. In most cases their performance is evaluated by computer simulations, rigorous and complete performance analysis has not been performed yet. It turns out that a theoretical oriented approach is indispensable for studying the limit or bound of algorithms and comparing different methods. The main goal of this dissertation is to develop several novel signal processing frameworks that enable to analyze and improve the performance of the existing timing recovery and carrier synchronization algorithms. As byproducts of this analysis, unified methods for designing new computationally and statistically efficient (i.e., minimum variance estimators) blind feedforward synchronizers are developed. Our work consists of three tightly coupled research directions. First, a general and unified framework is proposed to develop optimal nonlinear least-squares (NLS) carrier recovery scheme for burst transmissions. A family of blind constellation-dependent optimal "matched" NLS carrier estimators is proposed for synchronization of burst transmissions fully modulated by PSK and QAM-constellations in additive white Gaussian noise channels. Second, a cyclostationary statistics based framework is proposed for designing computationally and statistically efficient robust blind symbol timing recovery for time-selective flat-fading channels. Lastly, dealing with the problem of frame synchronization, a simple and efficient data-aided approach is proposed for jointly estimating the frame boundary, the frequency-selective channel and the carrier frequency offset

Journal of Telecommunications and Information Technology

kwartalni