Power Extraction Strategy of a Robust kW Range Marine Tidal Turbine Based on Permanent Magnet Synchronous Generators and Passive Rectifiers

This paper presents a kW range marine tidal current power generation system consisting of a fixed pitch marine current turbine (MCT) with two permanent magnet synchronous generators in the turbine shaft, two diode rectifiers (each rectifier is associated with a permanent magnet synchronous generator) and a DC source voltage. This system is designed for a kW range robust power supply. The specificity of the proposed system is that the two generators have different numbers of turns in their windings and the two rectifiers are in parallel in the same DC source. It has been demonstrated that the proposed system is able to harness very efficiently the energy of the turbine in the whole tidal cycle. The proposed system is interesting because it does not need complex control system and it allows minimizing converter losses costs due to electronic devices as controlled IGBT PWM converters usually used in conventional power generation systems. The analytical results have been confirmed numerically using PSIM software for two kW range generators with the same magnetic circuit and different winding number of turns

Modeling Solder Ball Array Interconnects for Power Module Optimization

PowerSynth is a software platform that can co-optimize power modules utilizing a 2D topology and wire bond interconnects. The novel 3D architectures being proposed at the University of Arkansas utilize solder ball interconnects instead of wire bonds. Therefore, they currently cannot be optimized using PowerSynth. This paper examines methods to accurately model the parasitic inductance of solder balls and ball grid arrays so they may be implemented into software for optimization. Proposed mathematical models are validated against ANSYS Electromagnetics Suite simulations. A comparison of the simulated data shows that mathematical models are well suited for implementation into optimization software platforms. Experimental measurements proved to be inconclusive and necessitate future work

Parallel algorithms for inductance extraction

In VLSI circuits, signal delays play an important role in design, timing verification and signal integrity checks. These delays are attributed to the presence of parasitic resistance, capacitance and inductance. With increasing clock speed and reducing feature sizes, these delays will be dominated by parasitic inductance. In the next generation VLSI circuits, with more than millions of components and interconnect segments, fast and accurate inductance estimation becomes a crucial step. A generalized approach for inductance extraction requires the solution of a large, dense, complex linear system that models mutual inductive effects among circuit elements. Iterative methods are used to solve the system without explicit computation of the system matrix itself. Fast hierarchical techniques are used to compute approximate matrix-vector products with the dense system matrix in a matrix-free way. Due to unavailability of system matrix, constructing a preconditioner to accelerate the convergence of the iterative method becomes a challenging task. This work presents a class of parallel algorithms for fast and accurate inductance extraction of VLSI circuits. We use the solenoidal basis approach that converts the linear system into a reduced system. The reduced system of equations is solved by a preconditioned iterative solver that uses fast hierarchical methods to compute products with the dense coefficient matrix. A GreenâÃÂÃÂs function based preconditioner is proposed that achieves near-optimal convergence rates in several cases. By formulating the preconditioner as a dense matrix similar to the coefficient matrix, we are able to use fast hierarchical methods for the preconditioning step as well. Experiments on a number of benchmark problems highlight the efficient preconditioning scheme and its advantages over FastHenry. To further reduce the solution time of the software, we have developed a parallel implementation. The parallel software package is capable of analyzing interconnects con- figurations involving several conductors within reasonable time. A two-tier parallelization scheme enables mixed mode parallelization, which uses both OpenMP and MPI directives. The parallel performance of the software is demonstrated through experiments on the IBM p690 and AMD Linux clusters. These experiments highlight the portability and efficiency of the software on multiprocessors with shared, distributed, and distributed-shared memory architectures

Conceptual design of a nonscaling fixed field alternating gradient accelerator for protons and carbon ions for charged particle therapy

Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.The conceptual design for a nonscaling fixed field alternating gradient accelerator suitable for charged particle therapy (the use of protons and other light ions to treat some forms of cancer) is described.EPSR

A Hybrid Active Filter Using the Backstepping Controller for Harmonic Current Compensation

This document presents a new hybrid combination of filters using passive and active elements because of the generalization in the use of non-linear loads that generate harmonics directly affecting the symmetry of energy transmission systems that influence the functioning of the electricity grid and, consequently, the deterioration of power quality. In this context, active power filters represent one of the best solutions for improving power quality and compensating harmonic currents to get a symmetrical waveform. In addition, given the importance and occupation of the transmission network, it is necessary to control the stability of the system. Traditionally, passive filters were used to improve energy quality, but they have endured problems such as resonance, fixed remuneration, etc. In order to mitigate these problems, a hybrid HAPF active power filter is proposed combining a parallel active filter and a passive filter controlled by a backstepping algorithm strategy. This control strategy is compared with two other methods, namely the classical PI control, and the fuzzy logic control in order to verify the effectiveness and the level of symmetry of the backstepping controller proposed for the HAPF. The proposed backstepping controller inspires the notion of stability in Lyapunov’s sense. This work is carried out to improve the performance of the HAPF by the backstepping command. It perfectly compensates the harmonics according to standards. The results of simulations performed under the Matlab/Simulink environment show the efficiency and robustness of the proposed backstepping controller applied on HAPF, compared to other control methods. The HAPF with the backstepping controller shows a significant decrease in the THD harmonic distortion rate

SQUID developments for the gravitational wave antenna MiniGRAIL

We designed two different sensor SQUIDs for the readout of the resonant mass gravitational wave detector MiniGRAIL. Both designs have integrated input inductors in the order of 1.5 muH and are planned for operation in the mK temperature range. Cooling fins were added to the shunt resistors. The fabricated SQUIDs show a behavior that differs from standard DC-SQUIDs. We were able to operate a design with a parallel configuration of washers at reasonable sensitivities. The flux noise saturated to a value of 0.84 muPhi0/radicHz below a temperature of 200 mK. The equivalent noise referred to the current through the input coil is 155 fA/radicHz and the energy resolution yields 62 h

An enhanced differential surface admittance operator for the signal integrity modeling of interconnects

A new, enhanced formulation of the 3-D differential surface admittance operator is presented in this contribution. By employing closed expressions for the sums of the infinite series that arise from discretizing the operator by means of entire domain basis functions, a more efficient and accurate form is obtained. Convergence analysis demonstrates the performance gain. Additionally, the appositeness of the novel operator is studied by analyzing results for various interconnect structures over a broad frequency range and by comparing with other research and commercial solvers

High-bandwidth microcoil for fast nuclear spin control

The active manipulation of nuclear spins with radio-frequency (RF) coils is at the heart of nuclear magnetic resonance (NMR) spectroscopy and spin-based quantum devices. Here, we present a microcoil transmitter system designed to generate strong RF pulses over a broad bandwidth, allowing for fast spin rotations on arbitrary nuclear species. Our design incorporates: (i) a planar multilayer geometry that generates a large field of 4.35 mT per unit current, (ii) a 50 Ohm transmission circuit with a broad excitation bandwidth of approximately 20 MHz, and (iii) an optimized thermal management for removal of Joule heating. Using individual 13C nuclear spins in the vicinity of a diamond nitrogen-vacancy (NV) center as a test system, we demonstrate Rabi frequencies exceeding 70 kHz and nuclear pi/2 rotations within 3.4 us. The extrapolated values for 1H spins are about 240 kHz and 1 us, respectively. Beyond enabling fast nuclear spin manipulations, our microcoil system is ideally suited for the incorporation of advanced pulse sequences into micro- and nanoscale NMR detectors operating at low (<1 T) magnetic field.Comment: 8 pages, 5 figures. Submitted to Rev. Sci. Inst

Investigating the intrinsic noise limit of Dayem bridge NanoSQUIDs

NanoSQUIDs made from Nb thin films have been produced with nanometre loop sizes down to 200 nm, using weak-link junctions with dimensions less than 60 nm. These composite (W/Nb) single layer thin film devices, patterned by FIB milling, show extremely good low-noise performance ∼170 nΦ0 at temperatures between 5 and 8.5 K and can operate in rather high magnetic fields (at least up to 1 T). The devices produced so far have a limited operating temperature range, typically only 1–2 K. We have the goal of achieving operation at 4.2 K, to be compatible with the best SQUID series array (SSA) preamplifier available. Using the SSA to readout the nanoSQUIDs provides us with a means of investigating the intrinsic noise of the former. In this paper we report improved white noise levels of these nanoSQUIDs, enabling potential detection of a single electronic spin flip in a 1-Hz bandwidth. At low frequencies the noise performance is already limited by SSA preamplifier noise