Parallel algorithms and architectures for low power video decoding

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 197-204).Parallelism coupled with voltage scaling is an effective approach to achieve high processing performance with low power consumption. This thesis presents parallel architectures and algorithms designed to deliver the power and performance required for current and next generation video coding. Coding efficiency, area cost and scalability are also addressed. First, a low power video decoder is presented for the current state-of-the-art video coding standard H.264/AVC. Parallel architectures are used along with voltage scaling to deliver high definition (HD) decoding at low power levels. Additional architectural optimizations such as reducing memory accesses and multiple frequency/voltage domains are also described. An H.264/AVC Baseline decoder test chip was fabricated in 65-nm CMOS. It can operate at 0.7 V for HD (720p, 30 fps) video decoding and with a measured power of 1.8 mW. The highly scalable decoder can tradeoff power and performance across >100x range. Second, this thesis demonstrates how serial algorithms, such as Context-based Adaptive Binary Arithmetic Coding (CABAC), can be redesigned for parallel architectures to enable high throughput with low coding efficiency cost. A parallel algorithm called the Massively Parallel CABAC (MP-CABAC) is presented that uses syntax element partitions and interleaved entropy slices to achieve better throughput-coding efficiency and throughput-area tradeoffs than H.264/AVC. The parallel algorithm also improves scalability by providing a third dimension to tradeoff coding efficiency for power and performance. Finally, joint algorithm-architecture optimizations are used to increase performance and reduce area with almost no coding penalty. The MP-CABAC is mapped to a highly parallel architecture with 80 parallel engines, which together delivers >10x higher throughput than existing H.264/AVC CABAC implementations. A MP-CABAC test chip was fabricated in 65-nm CMOS to demonstrate the power-performance-coding efficiency tradeoff.by Vivienne. Sze.Ph.D

Joint Algorithm-Architecture Optimization of CABAC

This paper uses joint algorithm and architecture design to enable high coding efficiency in conjunction with high processing speed and low area cost. Specifically, it presents several optimizations that can be performed on Context Adaptive Binary Arithmetic Coding (CABAC), a form of entropy coding used in H.264/AVC, to achieve the throughput necessary for real-time low power high definition video coding. The combination of syntax element partitions and interleaved entropy slices, referred to as Massively Parallel CABAC, increases the number of binary symbols that can be processed in a cycle. Subinterval reordering is used to reduce the cycle time required to process each binary symbol. Under common conditions using the JM12.0 software, the Massively Parallel CABAC, increases the bins per cycle by 2.7 to 32.8× at a cost of 0.25 to 6.84% coding loss compared with sequential single slice H.264/AVC CABAC. It also provides a 2× reduction in area cost, and reduces memory bandwidth. Subinterval reordering reduces the critical path delay by 14 to 22%, while modifications to context selection reduces the memory requirement by 67%. This work demonstrates that accounting for implementation cost during video coding algorithms design can enable higher processing speed and reduce hardware cost, while still delivering high coding efficiency in the next generation video coding standard.Texas Instruments Incorporated (Graduate Women's Fellowship for Leadership in Microelectronics)Natural Sciences and Engineering Research Council of Canad

Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding

Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 × 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip

A Deeply Pipelined CABAC Decoder for HEVC Supporting Level 6.2 High-tier Applications

High Efficiency Video Coding (HEVC) is the latest video coding standard that specifies video resolutions up to 8K Ultra-HD (UHD) at 120 fps to support the next decade of video applications. This results in high-throughput requirements for the context adaptive binary arithmetic coding (CABAC) entropy decoder, which was already a well-known bottleneck in H.264/AVC. To address the throughput challenges, several modifications were made to CABAC during the standardization of HEVC. This work leverages these improvements in the design of a high-throughput HEVC CABAC decoder. It also supports the high-level parallel processing tools introduced by HEVC, including tile and wavefront parallel processing. The proposed design uses a deeply pipelined architecture to achieve a high clock rate. Additional techniques such as the state prefetch logic, latched-based context memory, and separate finite state machines are applied to minimize stall cycles, while multibypass- bin decoding is used to further increase the throughput. The design is implemented in an IBM 45nm SOI process. After place-and-route, its operating frequency reaches 1.6 GHz. The corresponding throughputs achieve up to 1696 and 2314 Mbin/s under common and theoretical worst-case test conditions, respectively. The results show that the design is sufficient to decode in real-time high-tier video bitstreams at level 6.2 (8K UHD at 120 fps), or main-tier bitstreams at level 5.1 (4K UHD at 60 fps) for applications requiring sub-frame latency, such as video conferencing

Scalability of parallel video decoding on heterogeneous manycore architectures

This paper presents an analysis of the scalability of the parallel video decoding on heterogeneous many core architectures. As benchmark, we use a highly parallel H.264/AVC video decoder that generates a large number of independent tasks. In order to translate task-level parallelism into performance gains both the video decoder and the architecture have been optimized. The video decoder was modified for exploiting coarse-grain frame-level parallelism in the entropy decoding kernel which has been considered the main bottleneck. Second, a heterogeneous combination of cores is evaluated for executing different type of tasks. Finally, an evaluation of the memory requirements of the whole system has been carried out. Experiments conducted using a trace-driven simulation methodology shows that the evaluated system exhibits a good parallel scalability up to 68 cores. At this point the parallel video decoder is able to decode more than 200 HD frames per second using simple low power processors.Postprint (published version

Algorithms and Hardware Co-Design of HEVC Intra Encoders

Digital video is becoming extremely important nowadays and its importance has greatly increased in the last two decades. Due to the rapid development of information and communication technologies, the demand for Ultra-High Definition (UHD) video applications is becoming stronger. However, the most prevalent video compression standard H.264/AVC released in 2003 is inefficient when it comes to UHD videos. The increasing desire for superior compression efficiency to H.264/AVC leads to the standardization of High Efficiency Video Coding (HEVC). Compared with the H.264/AVC standard, HEVC offers a double compression ratio at the same level of video quality or substantial improvement of video quality at the same video bitrate. Yet, HE-VC/H.265 possesses superior compression efficiency, its complexity is several times more than H.264/AVC, impeding its high throughput implementation. Currently, most of the researchers have focused merely on algorithm level adaptations of HEVC/H.265 standard to reduce computational intensity without considering the hardware feasibility. What’s more, the exploration of efficient hardware architecture design is not exhaustive. Only a few research works have been conducted to explore efficient hardware architectures of HEVC/H.265 standard. In this dissertation, we investigate efficient algorithm adaptations and hardware architecture design of HEVC intra encoders. We also explore the deep learning approach in mode prediction. From the algorithm point of view, we propose three efficient hardware-oriented algorithm adaptations, including mode reduction, fast coding unit (CU) cost estimation, and group-based CABAC (context-adaptive binary arithmetic coding) rate estimation. Mode reduction aims to reduce mode candidates of each prediction unit (PU) in the rate-distortion optimization (RDO) process, which is both computation-intensive and time-consuming. Fast CU cost estimation is applied to reduce the complexity in rate-distortion (RD) calculation of each CU. Group-based CABAC rate estimation is proposed to parallelize syntax elements processing to greatly improve rate estimation throughput. From the hardware design perspective, a fully parallel hardware architecture of HEVC intra encoder is developed to sustain UHD video compression at 4K@30fps. The fully parallel architecture introduces four prediction engines (PE) and each PE performs the full cycle of mode prediction, transform, quantization, inverse quantization, inverse transform, reconstruction, rate-distortion estimation independently. PU blocks with different PU sizes will be processed by the different prediction engines (PE) simultaneously. Also, an efficient hardware implementation of a group-based CABAC rate estimator is incorporated into the proposed HEVC intra encoder for accurate and high-throughput rate estimation. To take advantage of the deep learning approach, we also propose a fully connected layer based neural network (FCLNN) mode preselection scheme to reduce the number of RDO modes of luma prediction blocks. All angular prediction modes are classified into 7 prediction groups. Each group contains 3-5 prediction modes that exhibit a similar prediction angle. A rough angle detection algorithm is designed to determine the prediction direction of the current block, then a small scale FCLNN is exploited to refine the mode prediction

Application-Specific Cache and Prefetching for HEVC CABAC Decoding

Context-based Adaptive Binary Arithmetic Coding (CABAC) is the entropy coding module in the HEVC/H.265 video coding standard. As in its predecessor, H.264/AVC, CABAC is a well-known throughput bottleneck due to its strong data dependencies. Besides other optimizations, the replacement of the context model memory by a smaller cache has been proposed for hardware decoders, resulting in an improved clock frequency. However, the effect of potential cache misses has not been properly evaluated. This work fills the gap by performing an extensive evaluation of different cache configurations. Furthermore, it demonstrates that application-specific context model prefetching can effectively reduce the miss rate and increase the overall performance. The best results are achieved with two cache lines consisting of four or eight context models. The 2 × 8 cache allows a performance improvement of 13.2 percent to 16.7 percent compared to a non-cached decoder due to a 17 percent higher clock frequency and highly effective prefetching. The proposed HEVC/H.265 CABAC decoder allows the decoding of high-quality Full HD videos in real-time using few hardware resources on a low-power FPGA.EC/H2020/645500/EU/Improving European VoD Creative Industry with High Efficiency Video Delivery/Film26

Decoder Hardware Architecture for HEVC

This chapter provides an overview of the design challenges faced in the implementation of hardware HEVC decoders. These challenges can be attributed to the larger and diverse coding block sizes and transform sizes, the larger interpolation filter for motion compensation, the increased number of steps in intra prediction and the introduction of a new in-loop filter. Several solutions to address these implementation challenges are discussed. As a reference, results for an HEVC decoder test chip are also presented.Texas Instruments Incorporate

CABAC accelerator architectures for video compression in future multimedida : a survey

The demands for high quality, real-time performance and multi-format video support in consumer multimedia products are ever increasing. In particular, the future multimedia systems require efficient video coding algorithms and corresponding adaptive high-performance computational platforms. The H.264/AVC video coding algorithms provide high enough compression efficiency to be utilized in these systems, and multimedia processors are able to provide the required adaptability, but the algorithms complexity demands for more efficient computing platforms. Heterogeneous (re-)configurable systems composed of multimedia processors and hardware accelerators constitute the main part of such platforms. In this paper, we survey the hardware accelerator architectures for Context-based Adaptive Binary Arithmetic Coding (CABAC) of Main and High profiles of H.264/AVC. The purpose of the survey is to deliver a critical insight in the proposed solutions, and this way facilitate further research on accelerator architectures, architecture development methods and supporting EDA tools. The architectures are analyzed, classified and compared based on the core hardware acceleration concepts, algorithmic characteristics, video resolution support and performance parameters, and some promising design directions are discussed. The comparative analysis shows that the parallel pipeline accelerator architecture seems to be the most promising