Optimal simulation of full binary trees on faulty hypercubes

The problem of operating full binary tree based algorithms on a hypercube with faulty nodes was investigated. Developing a method for embedding a full binary tree into the faulty hypercube is the solution to this problem. Two outcomes for embedding an (n-1)-tree into an n-cube with unit dilation and load, that were based on a new embedding technique, were presented. For the problem where the root can be mapped to any nonfaulty hypercube node, the optimum toleration of faults was shown. Moreover, it was demonstrated that the algorithm for the variable root embedding problem is maximal within a class algorithms called recursive embedding algorithms as far as the number of tolerable faults is concerned. Lastly, it was demonstrated that when an O(1/√n) fraction of nodes in the hypercube are faulty, a O(1)-load variable root embedding is not always possible regardless of the significance of the dilation.published_or_final_versio

Some Theoretical Results of Hypercube for Parallel Architecture

This paper surveys some theoretical results of the hypercube for design of VLSI architecture. The parallel computer including the hypercube multiprocessor will become a leading technology that supports efficient computation for large uncertain systems

Processor allocation strategies for modified hypercubes

Parallel processing has been widely accepted to be the future in high speed computing. Among the various parallel architectures proposed/implemented, the hypercube has shown a lot of promise because of its poweful properties, like regular topology, fault tolerance, low diameter, simple routing, and ability to efficiently emulate other architectures. The major drawback of the hypercube network is that it can not be expanded in practice because the number of communication ports for each processor grows as the logarithm of the total number of processors in the system. Therefore, once a hypercube supercomputer of a certain dimensionality has been built, any future expansions can be accomplished only by replacing the VLSI chips. This is an undesirable feature and a lot of work has been under progress to eliminate this stymie, thus providing a platform for easier expansion. Modified hypercubes (MHs) have been proposed as the building blocks of hypercube-based systems supporting incremental growth techniques without introducing extra resources for individual hypercubes. However, processor allocation on MHs proves to be a challenge due to a slight deviation in their topology from that of the standard hypercube network. This thesis addresses the issue of processor allocation on MHs and proposes various strategies which are based, partially or entirely, on table look-up approaches. A study of the various task allocation strategies for standard hypercubes is conducted and their suitability for MHs is evaluated. It is shown that the proposed strategies have a perfect subcube recognition ability and a superior performance. Existing processor allocation strategies for pure hypercube networks are demonstrated to be ineffective for MHs, in the light of their inability to recognize all available subcubes. A comparative analysis that involves the buddy strategy and the new strategies is carried out using simulation results

Faulty-Tolerant Algorithm for Mapping a Complete Binary Tree in an IEH

[[abstract]]Different parallel architectures may require different algorithms to make the existent algorithms on one architecture be easily transformed to or implemented on another architecture. This paper proposes a novel algorithm for embedding complete binary trees in a faulty Incrementally Extensible Hypercube (IEH). Furthermore, to obtain the replaceable node of the faulty node, 2-expansion is permitted such that up to (n+1) faults can be tolerated with dilation 3, congestion 1 and load 1. The presented embedding methods are optimized mainly for balancing the processor loads, while minimizing dilation and congestion as far as possible. According to the result, we can map the parallel algorithms developed by the structure of complete binary tree in an IEH. These methods of reconfiguring enable extremely high-speed parallel computation.[[notice]]補正完畢[[journaltype]]國外[[incitationindex]]EI[[booktype]]紙本[[countrycodes]]GR

Parallel Architectures for Planetary Exploration Requirements (PAPER)

The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified

Some fast elliptic solvers on parallel architectures and their complexities

The discretization of separable elliptic partial differential equations leads to linear systems with special block triangular matrices. Several methods are known to solve these systems, the most general of which is the Block Cyclic Reduction (BCR) algorithm which handles equations with nonconsistant coefficients. A method was recently proposed to parallelize and vectorize BCR. Here, the mapping of BCR on distributed memory architectures is discussed, and its complexity is compared with that of other approaches, including the Alternating-Direction method. A fast parallel solver is also described, based on an explicit formula for the solution, which has parallel computational complexity lower than that of parallel BCR

Distributed Fault-Tolerant Embeddings of Rings in Incrementally Extensible Hypercubes with Unbounded Expansion

[[abstract]]The Incrementally Extensible Hypercube (IEH) is a generalization of interconnection network that is derived from the hypercube. Unlike the hypercube, the IEH can be constructed for any number of nodes. That is, the IEH is incrementally expandable. In this paper, the problem of embedding and reconfiguring ring structures is considered in an IEH with faulty nodes. There are a novel embedding algorithm proposed in this paper. The embedding algorithm enables us to obtain the good embedding of a ring into a faulty IEH with unbounded expansion, and such the result can be tolerated up to O(n*log2m ) faults with congestion 1, load 1, and dilation 4. The presented embedding methods are optimized mainly for balancing the processor loads, while minimizing dilation and congestion as far as possible.[[notice]]補正完畢[[journaltype]]國際[[incitationindex]]EI[[ispeerreviewed]]Y[[booktype]]紙本[[countrycodes]]TW

Global synchronization algorithms for the Intel iPSC/860

In a distributed memory multicomputer that has no global clock, global processor synchronization can only be achieved through software. Global synchronization algorithms are used in tridiagonal systems solvers, CFD codes, sequence comparison algorithms, and sorting algorithms. They are also useful for event simulation, debugging, and for solving mutual exclusion problems. For the Intel iPSC/860 in particular, global synchronization can be used to ensure the most effective use of the communication network for operations such as the shift, where each processor in a one-dimensional array or ring concurrently sends a message to its right (or left) neighbor. Three global synchronization algorithms are considered for the iPSC/860: the gysnc() primitive provided by Intel, the PICL primitive sync0(), and a new recursive doubling synchronization (RDS) algorithm. The performance of these algorithms is compared to the performance predicted by communication models of both the long and forced message protocols. Measurements of the cost of shift operations preceded by global synchronization show that the RDS algorithm always synchronizes the nodes more precisely and costs only slightly more than the other two algorithms

Fault-Tolerant Ring Embeddings in Hypercubes -- A Reconfigurable Approach

We investigate the problem of designing reconfigurable embedding schemes for a fixed hypercube (without redundant processors and links). The fundamental idea for these schemes is to embed a basic network on the hypercube without fully utilizing the nodes on the hypercube. The remaining nodes can be used as spares to reconfigure the embeddings in case of faults. The result of this research shows that by carefully embedding the application graphs, the topological properties of the embedding can be preserved under fault conditions, and reconfiguration can be carried out efficiently. In this dissertation, we choose the ring as the basic network of interest, and propose several schemes for the design of reconfigurable embeddings with the aim of minimizing reconfiguration cost and performance degradation. The cost is measured by the number of node-state changes or reconfiguration steps needed for processing of the reconfiguration, and the performance degradation is characterized as the dilation of the new embedding after reconfiguration. Compared to the existing schemes, our schemes surpass the existing ones in terms of applicability of schemes and reconfiguration cost needed for the resulting embeddings