Development of a Variable Roller Pump and Evaluation of its Power Saving Potential as a Charge Pump in Hydrostatic Drivetrains

Predložená doktorandská dizertačná práca (ďalej len práca) sa zaoberá rozsiahlou analýzou valčekového hydrogenerátora s premenlivým geometrickým objemom a predikciou výkonových úspor dosiahnutých aplikáciou navrhnutého valčekového hydrogenerátora s premenlivým geometrickým objemom v hydrostatickom pohone vybraných mobilných pracovných strojov. Teoretický rozbor princípov fungovania valčekového hydrogenerátora a teória jednorozmerného simulačného modelu sú popísané v prvej časti práce. Na základe odvodenej teórie je vytvorený simulačný model, ktorý je vhodný na predikciu priebehu tlaku v komorách valčekového hydrogenerátora, síl pôsobiacich na valček a na predikciu vnútorných únikov vzniknutých skratovaním rozvodovej dosky, ktoré majú priamy vplyv na objemovú účinnosť valčekového hydrogenerátora. Simulačný model bol úspešne použitý pre optimalizáciu rozvodových dosiek valčekového hydrogenerátora a vhodnosť simulačného modelu potvrdili následné merania Práca obsahuje aj analýzu síl pôsobiacich na vodiaci prstenec, ktorej výsledky boli taktiež potvrdené meraním. Analýza týchto síl môže vylepšiť v konečnom dôsledku parametre budúcich tlakových regulácii. Práca ďalej obsahuje základné porovnanie použitých tlakových regulácii. Všetky uskutočnené merania potvrdili, že valčekový hydrogenerátor s premenlivým geometrickým objemom s testovanými tlakovými reguláciami je schopný úspešne pracovať v hydrostatickej prevodovke. Druhá časť práce analyzuje potenciál výkonových úspor valčekového hydrogenerátora s premenlivým geometrickým objemom pre dve mobilné aplikácie - teleskopický nakladač s hmotnosťou 9 ton a kombajn s hmotnosťou 20 ton. Analýza vyžaduje jednorozmerný simulačný model hydrostatického pohonu s teplotnou predikciou hydrostatickej prevodovky. Dva rozdielne koncepty variabilného doplňovacieho systému hydrostatickej prevodovky sú porovnané so štandardným doplňovacím systémom pre pracovný a transportný režim oboch vybraných typov vozidiel. Simulácia pohonu vozidla s valčekovým hydrogenerátorom s premenlivým geometrickým objemom vo funkcii doplňovacieho hydrogenerátora a obtokovou clonou potvrdili vyššie úspory iba v prípadoch, kedy rýchlosť doplňovacieho hydrogenerátora bola výrazne vyššia a prietok cez obtokovú clonu do skrine hlavného hydrogenerátora zabezpečil dostatočné chladenie. Najvyššie výkonové úspory boli dosiahnuté s premenlivým preplachovacím systémom, ktorého prietok sa menil podľa požiadaviek hydrostatickej prevodovky. Záver druhej časti práce sa zaoberá metodikou dimenzovania veľkosti doplňovacieho hydrogenerátora.Presented doctoral thesis deals with an extensive hydraulic variable roller pump analysis and the power saving prediction of hydrostatic drivetrains in the mobile machines achieved with a variable roller charge pump implementation. At the first part of the work, the roller pump functionality was described and the theory of a 1-D simulation model was developed. Based on this developed simulation model is suitable for pressure profile prediction, roller force prediction and cross port leakage prediction which has a direct impact on the total volumetric efficiency. The simulation model was successfully used as a tool for optimization of the port plates, which was confirmed by measurements. The first part of the work includes the pump control force analysis validated by measurements and also the basic pressure compensator controls comparison. Developed control force prediction could help to improve the control performance. The measurements confirmed that the variable roller charge pump is able to successfully work in transmissions with measured types of the control. The second part of the work analyzed the power saving potential of a variable charge pump for two selected typical mobile applications: telehandler (9 ton) and combine harvester (20 ton). This part required a 1-D drivetrain simulation model together with thermal behaviour of the hydrostatic transmission. Two different modifications of the charging systems were compared with the conventional charging system in simulations performed for the working and transporting mode. The drivetrain simulation of the variable roller charge pump with a bypass orifice confirms higher power savings only in cases when the pump speed was significantly higher than normal speeds and a relatively constant flushing flow through the bypass orifice to the pump case still ensures suitable cooling. The highest power savings were achieved with variable flushing flows, where the demand for charging flow was adjusted according to the hydrostatic transmission cooling requirements. At the end of the second part, this thesis deals with a variable charge pump sizing.

Mobile robot based electrostatic spray system for controlling pests on cotton plants in Iraq

A mobile robot based electrostatic spray system was developed to combat pest infestation on cotton plants in Iraq. The system consists of a charged spray nozzle, a CCD camera, a mobile robot (vehicle and arm) and Arduino microcontroller. Arduino microcontroller is used to control the spray nozzle and the robot. Matlab is used to process the image from the CCD camera and to generate the appropriate control signals to the robot and the spray nozzle. COMSOL multi-physics FEM software was used to design the induction electrodes to achieve maximum charge transfer onto the fan spray liquid film resulting in achieving the desired charge/mass ratio of the spray. The charged spray nozzle was operated on short duration pulsed spray mode. Image analysis was employed to investigate the spray deposition on improvised insect targets on an artificial plant.The ministry of higher education and scientific research of Iraqi governmen

Temperature sensitive controller performance of MR dampers

Magnetorheological (MR) dampers can experience large temperature changes as a result of heating caused by energy dissipation, but control systems are often designed without consideration of this fact. Furthermore, due to the highly nonlinear behavior of MR dampers, many control strategies have been proposed and it is difficult to determine which is the most effective. This paper aims to address these issues through a numerical and experimental study of an MR mass isolator subject to temperature variation. A dynamic temperature dependant model of an MR damper is first developed and validated. Control system experiments are then performed using hardware-in-the-loopsimulations. Proportional, PID, gain scheduling, and on/off control strategies are found to be equally affected by temperature variation. Using simulations incorporating the temperature dependant MR damper model, it is shown that this is largely due to a change in fluid viscosity and the associated movement of the lower clipped optimal' control bound. This zero-volts condition determines how close any controller can perform to the ideal semiactive case, thus all types of controller are affected. In terms of relative performance, proportional and PID controllers perform equally well and outperform the on/off and gain scheduling strategies. Gain scheduling methods are superior to on/off control

The Working Hydraulics of Valve-Controlled Mobile Machines: Classification and Review

Productivity, reliability, controllability, flexibility and affordable costs represent key aspects in mobile machines. Additionally, due to the high fuel price and to the introduction of stringent emission regulations for diesel engines, the reduction of fuel consumption while persevering the existing performance is the current demand. In order to satisfy and maximize the above requirements, different hydraulic system architectures have been developed during the last decades. Both academia and industry have been investing considerable resources delivering numerous outcomes that require a classification. This review paper closes this gap by analyzing and classifying the working hydraulics of non-hybrid, valve-controlled mobile machines starting from the 1980s to the state-of-the-art. Hydraulic layouts are addressed and categorized by both discussing their fundamentals and evolutions, and by pointing out their pros and cons in a way to provide the readers with a comprehensive overview of the systems currently available on the market and at the research stage

Thermo-Hydraulic Modelling and Experimental Validation of an Electro-Hydraulic Compact Drive

Electro-hydraulic compact drives (ECDs) are an emerging technology for linear actuation in a wide range of applications. Especially within the low power range of 5–10 kW, the plug-and-play capability, good energy efficiency and small space requirements of ECDs render this technology a promising alternative to replace conventional valve-controlled linear drive solutions. In this power range, ECDs generally rely on passive cooling to keep oil and system temperatures within the tolerated range. When expanding the application range to larger power classes, passive cooling may not be sufficient. Research investigating the thermal behaviour of ECDs is limited but indeed required for a successful expansion of the application range. In order to obtain valuable insights into the thermal behaviour of ECDs, thermo-hydraulic simulation is an important tool. This may enable system design engineers to simulate thermal behaviour and thus develop proper thermal designs during the early design phase, especially if such models contain few parameters that can be determined with limited information available. Our paper presents a lumped thermo-hydraulic model derived from the conservation of mass and energy. The derived model was experimentally validated based on experimental data from an ECD prototype. Results show good accuracy between measured and simulated temperatures. Even a simple thermal model containing only a few thermal resistances may be sufficient to predict steady-state and transient temperatures with reasonable accuracy. The presented model may be used for further investigations into the thermal behaviour of ECDs and thus toward proper thermal designs required to expand the application range.publishedVersio

Parameter estimation of systems with deadzone and deadband and emulation using xPC Target

The first paper presents a new approach for online parameter estimation using multiple recursive least squares estimations implemented simultaneously to determine system model parameters, as well as a deadzone and/or deadband. the online adaptive estimation scheme was verified in simulation using MATLAB Simulink and verified experimentally for a DC motor driven cart, an electro-hydraulic pilot valve system, and a free cart loosely coupled to a DC motor driven cart by a pin that fits loosely in a slot...The second paper demonstrates the use of the Mathworks xPC Target environment for validation of a control system and emulation of a physical system using real-time code auto-generated from a simulation environment. A Master/Slave control system is developed for a hydraulic test stand --Abstract, page iv