Singularity-free workspace analysis and geometric optimization of parallel mechanisms

Les mécanismes parallèles sont fréquemment utilisés comme robots manipulateurs, comme simulateurs de mouvement, comme machines parallèles, etc. Cependant, à cause des chaînes cinématiques fermées qui caractérisent leur architecture, le mouvement de leur plateforme est limité et des singularités cinématiques complexes peuvent apparaître à l'intérieur de leur espace de travail. Par conséquent, une maximisation l'espace de travail libre de singularité pour ce type de mécanismes est souhaitable dans un contexte de conception. Dans cette thèse, deux types de mécanismes parallèles sont étudiés: les mécanismes parallèles plans ?avec, en particulier le 3-RPR? et les mécanismes spatiaux ?avec, en particulier, la plateforme de Gough-Stewart. Pour chaque type de mécanisme parallèle, une forme simple d'équation de singularité est obtenue. Le principe consiste à séparer l'origine O' du repère mobile du point considéré P et de faire coïncider O' avec un point particulier de la plateforme. L'équation ainsi obtenue est l'équation de singularité du point P de la plateforme qui contient un ensemble minimal de paramètres géométriques. Par ailleurs, il est prouvé que les centres des cercles et sphères définissant l'espace de travail se trouvent exactement sur les lieux de singularité. Cette observation et l'équation de singularité simplifiée constituent les points de départ de l'analyse de l'espace de travail libre de singularité ainsi que de l'optimisation géométrique. Pour le mécanisme parallèle plan 3-RPR, l'espace de travail libre de singularité et les limites correspondantes pour la longueur des pattes dans une orientation prescrite sont déterminés. Ensuite l'architecture optimale qui permet d'obtenir un espace de travail maximal tout en étant libre de singularité est discutée. En ce qui concerne la plateforme de Gough-Stewart, cette thèse se concentre sur le manipulateur symétrique simplifié minimal (MSSM). Comme une plateforme de Gough- Stewart a 6 degrés de liberté, son espace de travail se divise en deux: l'espace de travail en position (ou simplement espace de travail) et l'espace de travail en orientation. A partir de l'équation de singularité simplifiée, une procédure générale est développée afin de déterminer l'espace de travail libre de singularité maximal autour d'un point particulier dans une orientation donnée, et afin de déterminer les limites correspondantes des longueurs de patte. Dans le but de maximiser l'espace de travail libre de singularité en orientation, un algorithme est présenté qui optimise les trois angles d'orientation. Sachant qu'une plateforme fonctionne habituellement pour une certaine gamme d'orientations, deux algorithmes qui calculent l'espace de travail en orientation libre de singularité maximal sont présentés. En utilisant les angles d'Euler en roulis, tangage et lacet, l'espace de travail en orientation pour une position prescrite peut être défini par 12 surfaces. Basé sur ce fait, un algorithme numérique est présenté qui évalue et représente l'espace de travail en orientation pour une position prescrite dans les limites données de longueur de patte. Ensuite, une procédure est proposée afin de déterminer l'espace de travail en orientation libre singularité maximal ainsi que les limites correspondantes des longueurs de patte. En pratique, une plateforme peut fonctionner dans un ensemble de positions. Ainsi, l'effet de la position de travail sur l'espace de travail en orientation libre de singularité maximal est analysé et deux algorithmes sont proposés pour calculer ce dernier pour tout un ensemble de positions particulières. Finalement, un algorithme qui optimise les paramètres géométriques est développé dans le but de déterminer l'architecture optimale qui permet à la plateforme de MSSM Gough-Stewart d'obtenir l'espace de travail libre singularité maximal autour d'une position particulière pour l'orientation de référence. Les résultats obtenus peuvent être utilisés pour la conception géométrique, la configuration des paramètres (longueur des pattes) ou la planification de trajectoires libres de singularité des mécanismes parallèles considérés. En outre, les algorithmes proposés peuvent également être appliqués à d'autres types de mécanismes parallèles

Numerical computation and avoidance of manipulator singularities

This thesis develops general solutions to two open problems of robot kinematics: the exhaustive computation of the singularity set of a manipulator, and the synthesis of singularity-free paths between given configurations. Obtaining proper solutions to these problems is crucial, because singularities generally pose problems to the normal operation of a robot and, thus, they should be taken into account before the actual construction of a prototype. The ability to compute the whole singularity set also provides rich information on the global motion capabilities of a manipulator. The projections onto the task and joint spaces delimit the working regions in such spaces, may inform on the various assembly modes of the manipulator, and highlight areas where control or dexterity losses can arise, among other anomalous behaviour. These projections also supply a fair view of the feasible movements of the system, but do not reveal all possible singularity-free motions. Automatic motion planners allowing to circumvent problematic singularities should thus be devised to assist the design and programming stages of a manipulator. The key role played by singular configurations has been thoroughly known for several years, but existing methods for singularity computation or avoidance still concentrate on specific classes of manipulators. The absence of methods able to tackle these problems on a sufficiently large class of manipulators is problematic because it hinders the analysis of more complex manipulators or the development of new robot topologies. A main reason for this absence has been the lack of computational tools suitable to the underlying mathematics that such problems conceal. However, recent advances in the field of numerical methods for polynomial system solving now permit to confront these issues with a very general intention in mind. The purpose of this thesis is to take advantage of this progress and to propose general robust methods for the computation and avoidance of singularities on non-redundant manipulators of arbitrary architecture. Overall, the work seeks to contribute to the general understanding on how the motions of complex multibody systems can be predicted, planned, or controlled in an efficient and reliable way.Aquesta tesi desenvolupa solucions generals per dos problemes oberts de la cinemàtica de robots: el càlcul exhaustiu del conjunt singular d'un manipulador, i la síntesi de camins lliures de singularitats entre configuracions donades. Obtenir solucions adequades per aquests problemes és crucial, ja que les singularitats plantegen problemes al funcionament normal del robot i, per tant, haurien de ser completament identificades abans de la construcció d'un prototipus. La habilitat de computar tot el conjunt singular també proporciona informació rica sobre les capacitats globals de moviment d'un manipulador. Les projeccions cap a l'espai de tasques o d'articulacions delimiten les regions de treball en aquests espais, poden informar sobre les diferents maneres de muntar el manipulador, i remarquen les àrees on poden sorgir pèrdues de control o destresa, entre d'altres comportaments anòmals. Aquestes projeccions també proporcionen una imatge fidel dels moviments factibles del sistema, però no revelen tots els possibles moviments lliures de singularitats. Planificadors de moviment automàtics que permetin evitar les singularitats problemàtiques haurien de ser ideats per tal d'assistir les etapes de disseny i programació d'un manipulador. El paper clau que juguen les configuracions singulars ha estat àmpliament conegut durant anys, però els mètodes existents pel càlcul o evitació de singularitats encara es concentren en classes específiques de manipuladors. L'absència de mètodes capaços de tractar aquests problemes en una classe suficientment gran de manipuladors és problemàtica, ja que dificulta l'anàlisi de manipuladors més complexes o el desenvolupament de noves topologies de robots. Una raó principal d'aquesta absència ha estat la manca d'eines computacionals adequades a les matemàtiques subjacents que aquests problemes amaguen. No obstant, avenços recents en el camp de mètodes numèrics per la solució de sistemes polinòmics permeten ara enfrontar-se a aquests temes amb una intenció molt general en ment. El propòsit d'aquesta tesi és aprofitar aquest progrés i proposar mètodes robustos i generals pel càlcul i evitació de singularitats per manipuladors no redundants d'arquitectura arbitrària. En global, el treball busca contribuir a la comprensió general sobre com els moviments de sistemes multicos complexos es poden predir, planificar o controlar d'una manera eficient i segur

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Dynamically Feasible Trajectories of Fully-Constrained Cable-Suspended Parallel Robots

Cable-Driven Parallel Robots employ multiple cables, whose lengths are controlled by winches, to move an end-effector (EE). In addition to the advantages of other parallel robots, such as low moving inertias and the potential for high dynamics, they also provide specific advantages, such as large workspaces and lower costs. Thus, over the last 30 years, they have been the object of academic research; also, they are being employed in industrial applications. The main issue with cable actuation is its unilaterality, as cables must remain in tension: if they become slack, there is a risk of losing control of the EE's pose. This complicates the control of cable-driven robots and is among the most studied topics in this field. Most previous works resort to extra cables or rigid elements pushing on the EE to guarantee that cables remain taut, but this complicates robot design. An alternative is to use the gravitational and inertial forces acting on the EE to keep cables in tension. This thesis shows that the robot's workspace can be greatly increased, by considering two model architectures. Moreover, practical limits to the feasibility of a motion, such as singularities of the kinematic chain and interference between cables, are considered. Even if a motion is feasible, there is no guarantee that it can be performed with an acceptable precision in the end-effector's pose, due to the inevitable errors in the positioning of the actuators and the elastic deflections of the structure. Therefore, a set of indexes are evaluated to measure the sensitivity of the end-effector's pose to actuation errors. Finally, the stiffness of one of the two architectures is modeled and indexes to measure the global compliance of the robot due to the elasticity of the cables are presented.I robot paralleli a cavi impiegano cavi, la cui lunghezza è controllata da argani, per muovere un elemento terminale o end-effector (EE). Oltre ai vantaggi degli altri robot paralleli, come basse inerzie in movimento e la possibilità di raggiungere velocità e accelerazioni elevate, possono anche fornire vantaggi specifici, come ampi spazi di lavoro e costi inferiori. Pertanto, negli ultimi 30 anni, questi robot sono stati oggetto di ricerche accademiche e stanno trovando applicazione anche in campo industriale. Il problema principale dell'azionamento mediante cavi è che è unilaterale, poiché i cavi possono essere tesi ma non compressi: quando diventano laschi, si rischia di perdere il controllo della posa dell'EE. Questo complica il controllo dei robot ed è uno dei temi più studiati nel settore. Gli studi compiuti sinora ricorrono prevalentemente a cavi addizionali o a elementi rigidi che spingono sull'EE per garantire che i cavi rimangano tesi, ma questo complica la progettazione dei robot. Un'alternativa è sfruttare le forze gravitazionali e inerziali che agiscono sull'EE per mantenere i cavi in tensione. Questa tesi dimostra che, in questo caso, lo spazio di lavoro del robot può essere notevolmente aumentato, applicando questo concetto a due architetture modello. Inoltre, vengono considerati i limiti imposti all'effettiva realizzabilità di un movimento, come le singolarità della catena cinematica e l'interferenza tra i cavi. Anche se un movimento è fattibile, non è garantito che si possa eseguire con precisione accettabile, a causa degli inevitabili errori di posizionamento degli attuatori e delle deformazioni elastiche della struttura. Si valutano quindi alcuni indici per misurare la sensibilità della posizione dell'elemento terminale agli errori di azionamento. Infine, è modellata la rigidezza di una delle due architetture proposte e sono presentati indici per misurare la cedevolezza globale del robot dovuta all'elasticità dei cavi

Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Analysis of the Workspace of Tendon-based Stewart Platforms

Tendon-based Stewart platforms are a concept for innovative manipulators where the load to move almost coincides with the payload. After an overview over the state of research and some concepts of kinematics (singularity and redundancy), the thesis discusses aspects of the technically usable workspace (positive tendon forces, limits of tension, singularity, stiffness, collisions between tendens). A representation of the controllablwe workspace by means of polynomial inequalities is developed. Optimal solutions are provided to the problem of finding appropriate force distributions in the tendons. These solutions can be discontinuous in time, but they can be approximated with continuous ones. An algorithm is given for this. From these results, a quality measure for workspace is derived and used to state design rules which help achieving good workspaces. For some systems, sample trajectories are simulated.</p

Advances in Robot Kinematics : Proceedings of the 15th international conference on Advances in Robot Kinematics

International audienceThe motion of mechanisms, kinematics, is one of the most fundamental aspect of robot design, analysis and control but is also relevant to other scientific domains such as biome- chanics, molecular biology, . . . . The series of books on Advances in Robot Kinematics (ARK) report the latest achievement in this field. ARK has a long history as the first book was published in 1991 and since then new issues have been published every 2 years. Each book is the follow-up of a single-track symposium in which the participants exchange their results and opinions in a meeting that bring together the best of world’s researchers and scientists together with young students. Since 1992 the ARK symposia have come under the patronage of the International Federation for the Promotion of Machine Science-IFToMM.This book is the 13th in the series and is the result of peer-review process intended to select the newest and most original achievements in this field. For the first time the articles of this symposium will be published in a green open-access archive to favor free dissemination of the results. However the book will also be o↵ered as a on-demand printed book.The papers proposed in this book show that robot kinematics is an exciting domain with an immense number of research challenges that go well beyond the field of robotics.The last symposium related with this book was organized by the French National Re- search Institute in Computer Science and Control Theory (INRIA) in Grasse, France

Industrial Robotics

This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein

Robot Manipulators

Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world