1,276 research outputs found
Network delay control through adaptive queue management
Timeliness in delivering packets for delay-sensitive applications is an important QoS (Quality of Service) measure in many systems, notably those that need to provide real-time performance. In such systems, if delay-sensitive traffic is delivered to the destination beyond the deadline, then the packets will be rendered useless and dropped after received at the destination. Bandwidth that is already scarce and shared between network nodes is wasted in relaying these expired packets. This thesis proposes that a deterministic per-hop delay can be achieved by using a dynamic queue threshold concept to bound delay of each node. A deterministic per-hop delay is a key component in guaranteeing a deterministic end-to-end delay. The research aims to develop a generic approach that can constrain network delay of delay-sensitive traffic in a dynamic network. Two adaptive queue management schemes, namely, DTH (Dynamic THreshold) and ADTH (Adaptive DTH) are proposed to realize the claim. Both DTH and ADTH use the dynamic threshold concept to constrain queuing delay so that bounded average queuing delay can be achieved for the former and bounded maximum nodal delay can be achieved for the latter. DTH is an analytical approach, which uses queuing theory with superposition of N MMBP-2 (Markov Modulated Bernoulli Process) arrival processes to obtain a mapping relationship between average queuing delay and an appropriate queuing threshold, for queue management. While ADTH is an measurement-based algorithmic approach that can respond to the time-varying link quality and network dynamics in wireless ad hoc networks to constrain network delay. It manages a queue based on system performance measurements and feedback of error measured against a target delay requirement. Numerical analysis and Matlab simulation have been carried out for DTH for the purposes of validation and performance analysis. While ADTH has been evaluated in NS-2 simulation and implemented in a multi-hop wireless ad hoc network testbed for performance analysis. Results show that DTH and ADTH can constrain network delay based on the specified delay requirements, with higher packet loss as a trade-off
ADTH: Bounded Nodal Delay for Better Performance in Wireless Ad-hoc Networks
© 2018 Delay is an unavoidable factor that occurs within networks and may be exacerbated by the nature of wireless ad-hoc networks. Maintaining a manageable level of delay may be required to provide satisfactory performance for each of the nodes that form the network. The variability of IoT devices, topologies and network conditions demand that a standalone and scalable scheme be used. ADTH is first shown to accomplish this through simulations with the NS-2 network simulator. The scheme was then used with testbed implementation with Gumstix devices and real-time traffic provided by an STC Traffic Generator. These demonstrated its effectiveness in managing flows of delay sensitive traffic, in addition to delivering superior bandwidth utilisation than standard policies
Improving the Performance of Wireless LANs
This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids
Overhead and Segmentation Mismatch Effect on Bluetooth WPAN Performance
Currently, Bluetooth is the most widely used technology for Wireless Personal
Area Networks (WPAN). Quality-of-Service (QoS) support is critical to ensure bandwidth
maximization for mobile applications based on this WPAN technology. The overhead introduced
by the different layers of Bluetooth protocol may have a serious impact on WPAN
performance. However, most studies of Bluetooth performance neglect this overhead and
assume that data are directly transmitted over L2CAP (Logical Link Control and
Adaptation Protocol) or even HCI (Host Controller Interface) layers. In fact, this option is
not feasible in most Bluetooth applications, as they integrate actual devices that implement
a particular Bluetooth profile, usually SPP (Serial Port Profile). The use of profiles cannot
be disregarded as they guarantee the interoperability between devices from different
vendors. The aim of this paper is to characterise the performance of a Bluetooth WPAN
(specifically the end-to-end delay and the throughput) when profiles are utilised. This study
takes into account the overhead added by the protocols taking part in the transmission of
user data. This paper also explores the effect of segmentation mismatch that may appear
when the maximum size for data in each layer of the architecture is different. The analysis
has been focused on SPP and PAN (Personal Area Networks) profiles. In the case of the
PAN profile, the study concludes that the network performance decreases for user data sizes
greater than 1,472 bytes, since the excessive overhead added by the network layer is
increased by the IP (Internet Proto-col) fragmentation. In the case of SPP, an inappropriate
choice of the maximum data unit at RFCOMM (Radio Frequency Communication for
Serial Cable Emulation Protocol based on ETSI TS 07.10) and L2CAP layers can also
heavily affect the transmission delay
Enabling reliable and power efficient real-time multimedia delivery over wireless sensor networks
There is an increasing need to run real-time multimedia applications, e.g. battle field and border surveillance, over Wireless Sensor Networks (WSNs). In WSNs, packet delivery exhibits high packet loss rate due to congestion, wireless channel high bit error rate, route failure, signal attenuation, etc... Flooding conventional packets over all sensors redundantly provides reliable delivery. However, flooding real-time multimedia packets is energy inefficient for power limited sensors and causes severe contentions affecting reliable delivery.
We propose the Flooding Zone Initialization Protocol (FZIP) to enhance reliability and reduce power consumption of real-time multimedia flooding in WSNs. FZIP is a setup protocol which constrains flooding within a small subset of intermediate nodes called Flooding Zone (FZ). Also, we propose the Flooding Zone Control Protocol (FZCP) which monitors the session quality and dynamically changes the FZ size to adapt to current network state, thus providing a tradeoff of good quality and less power consumption
- …