518 research outputs found

    A Survey and Future Directions on Clustering: From WSNs to IoT and Modern Networking Paradigms

    Get PDF
    Many Internet of Things (IoT) networks are created as an overlay over traditional ad-hoc networks such as Zigbee. Moreover, IoT networks can resemble ad-hoc networks over networks that support device-to-device (D2D) communication, e.g., D2D-enabled cellular networks and WiFi-Direct. In these ad-hoc types of IoT networks, efficient topology management is a crucial requirement, and in particular in massive scale deployments. Traditionally, clustering has been recognized as a common approach for topology management in ad-hoc networks, e.g., in Wireless Sensor Networks (WSNs). Topology management in WSNs and ad-hoc IoT networks has many design commonalities as both need to transfer data to the destination hop by hop. Thus, WSN clustering techniques can presumably be applied for topology management in ad-hoc IoT networks. This requires a comprehensive study on WSN clustering techniques and investigating their applicability to ad-hoc IoT networks. In this article, we conduct a survey of this field based on the objectives for clustering, such as reducing energy consumption and load balancing, as well as the network properties relevant for efficient clustering in IoT, such as network heterogeneity and mobility. Beyond that, we investigate the advantages and challenges of clustering when IoT is integrated with modern computing and communication technologies such as Blockchain, Fog/Edge computing, and 5G. This survey provides useful insights into research on IoT clustering, allows broader understanding of its design challenges for IoT networks, and sheds light on its future applications in modern technologies integrated with IoT.acceptedVersio

    A short survey on next generation 5G wireless networks

    Get PDF
    Current 4G - the fourth-generation wireless communication, which exists in most countries, represents an advance of the previous 3 generation wireless communication. However, there are some challenges and limitations, associated with an explosion of wireless devices, which cannot be accommodated by 4G. Increasing the proliferation of smart devices, the development of new multimedia applications, and the growing demand for high data rates are among the main problems of the existing 4G system. As a solution, the wireless system designers have started research on the fifth-generation wireless systems. 5G will be the paradigm shift that could provide with ultra-high data rate, low latency, an increase of the base station capacity, and the improved quality of services. This paper is a review of the changes through the evolution of existing cellular networks toward 5G.  It represented a comprehensive study associated with 5G, requirements for 5G, its advantages, and challenges. We will explain the architecture changes – radio access network (RAN), air interfaces, smart antennas, cloud RAN, and HetNet. Furthermore, it discussed physical layer technologies, which include new channel modes estimation, new antenna design, and MIMO technologies. Also, it discussed MAC layer protocols. The article included three kinds of technologies: heterogeneous networks, massive multiple-input and output, and millimeter-wave. Finally, it explained the applications, supported by 5G, new features, various possibilities, and predictions

    Low-latency Networking: Where Latency Lurks and How to Tame It

    Full text link
    While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental performance limitations. We will be able to develop low-latency networks only if we address the problem of these complex interactions from the new point of view of sub-milliseconds latency. In this article, we propose a holistic analysis and classification of the main design principles and enabling technologies that will make it possible to deploy low-latency wireless communication networks. We argue that these design principles and enabling technologies must be carefully orchestrated to meet the stringent requirements and to manage the inherent trade-offs between low latency and traditional performance metrics. We also review currently ongoing standardization activities in prominent standards associations, and discuss open problems for future research

    Relaying in the Internet of Things (IoT): A Survey

    Get PDF
    The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

    Smart performance optimization of energy-aware scheduling model for resource sharing in 5G green communication systems

    Get PDF
    This paper presents an analysis of the performance of the Energy Aware Scheduling Algorithm (EASA) in a 5G green communication system. 5G green communication systems rely on EASA to manage resource sharing. The aim of the proposed model is to improve the efficiency and energy consumption of resource sharing in 5G green communication systems. The main objective is to address the challenges of achieving optimal resource utilization and minimizing energy consumption in these systems. To achieve this goal, the study proposes a novel energy-aware scheduling model that takes into consideration the specific characteristics of 5G green communication systems. This model incorporates intelligent techniques for optimizing resource allocation and scheduling decisions, while also considering energy consumption constraints. The methodology used involves a combination of mathematical analysis and simulation studies. The mathematical analysis is used to formulate the optimization problem and design the scheduling model, while the simulations are used to evaluate its performance in various scenarios. The proposed EASM reached a 91.58% false discovery rate, a 64.33% false omission rate, a 90.62% prevalence threshold, and a 91.23% critical success index. The results demonstrate the effectiveness of the proposed model in terms of reducing energy consumption while maintaining a high level of resource utilization.© 2024 The Authors. The Journal of Engineering published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.fi=vertaisarvioitu|en=peerReviewed
    • …
    corecore