Assessment of the worthwhileness of efficient driving in railway systems with high-receptivity power supplies

Eco-driving is one of the most important strategies for significantly reducing the energy consumption of railways with low investments. It consists of designing a way of driving a train to fulfil a target running time, consuming the minimum amount of energy. Most eco-driving energy savings come from the substitution of some braking periods with coasting periods. Nowadays, modern trains can use regenerative braking to recover the kinetic energy during deceleration phases. Therefore, if the receptivity of the railway system to regenerate energy is high, a question arises: is it worth designing eco-driving speed profiles? This paper assesses the energy benefits that eco-driving can provide in different scenarios to answer this question. Eco-driving is obtained by means of a multi-objective particle swarm optimization algorithm, combined with a detailed train simulator, to obtain realistic results. Eco-driving speed profiles are compared with a standard driving that performs the same running time. Real data from Spanish high-speed lines have been used to analyze the results in two case studies. Stretches fed by 1 × 25 kV and 2 × 25 kV AC power supply systems have been considered, as they present high receptivity to regenerate energy. Furthermore, the variations of the two most important factors that affect the regenerative energy usage have been studied: train motors efficiency ratio and catenary resistance. Results indicate that the greater the catenary resistance, the more advantageous eco-driving is. Similarly, the lower the motor efficiency, the greater the energy savings provided by efficient driving. Despite the differences observed in energy savings, the main conclusion is that eco-driving always provides significant energy savings, even in the case of the most receptive power supply network. Therefore, this paper has demonstrated that efforts in improving regenerated energy usage must not neglect the role of eco-driving in railway efficiency

Control of Energy Storage

Energy storage can provide numerous beneficial services and cost savings within the electricity grid, especially when facing future challenges like renewable and electric vehicle (EV) integration. Public bodies, private companies and individuals are deploying storage facilities for several purposes, including arbitrage, grid support, renewable generation, and demand-side management. Storage deployment can therefore yield benefits like reduced frequency fluctuation, better asset utilisation and more predictable power profiles. Such uses of energy storage can reduce the cost of energy, reduce the strain on the grid, reduce the environmental impact of energy use, and prepare the network for future challenges. This Special Issue of Energies explore the latest developments in the control of energy storage in support of the wider energy network, and focus on the control of storage rather than the storage technology itself

Applications of Genetic Algorithm and Its Variants in Rail Vehicle Systems: A Bibliometric Analysis and Comprehensive Review

Railway systems are time-varying and complex systems with nonlinear behaviors that require effective optimization techniques to achieve optimal performance. Evolutionary algorithms methods have emerged as a popular optimization technique in recent years due to their ability to handle complex, multi-objective issues of such systems. In this context, genetic algorithm (GA) as one of the powerful optimization techniques has been extensively used in the railway sector, and applied to various problems such as scheduling, routing, forecasting, design, maintenance, and allocation. This paper presents a review of the applications of GAs and their variants in the railway domain together with bibliometric analysis. The paper covers highly cited and recent studies that have employed GAs in the railway sector and discuss the challenges and opportunities of using GAs in railway optimization problems. Meanwhile, the most popular hybrid GAs as the combination of GA and other evolutionary algorithms methods such as particle swarm optimization (PSO), ant colony optimization (ACO), neural network (NN), fuzzy-logic control, etc with their dedicated application in the railway domain are discussed too. More than 250 publications are listed and classified to provide a comprehensive analysis and road map for experts and researchers in the field helping them to identify research gaps and opportunities

SmartDrive: Traction Energy Optimization and Applications in Rail Systems

This paper presents the development of SmartDrive package to achieve the application of energy-efficient driving strategy. The results are from collaboration between Ricardo Rail and the Birmingham Centre for Railway Research and Education (BCRRE). Advanced tram and train trajectory optimization techniques developed by BCRRE as part of the UKTRAM More Energy Efficiency Tram project have been now incorporated in Ricardo's SmartDrive product offering. The train trajectory optimization method, associated driver training and awareness package (SmartDrive) has been developed for use on tram, metro, and some heavy rail systems. A simulator was designed that can simulate the movement of railway vehicles and calculate the detailed power system energy consumption with different train trajectories when implemented on a typical AC or DC powered route. The energy evaluation results from the simulator will provide several potential energy-saving solutions for the existing route. An enhanced Brute Force algorithm was developed to achieve the optimization quickly and efficiently. Analysis of the results showed that by implementing an optimal speed trajectory, the energy usage in the network can be significantly reduced. A driver practical training system and the optimized lineside driving control signage, based on the optimized trajectory were developed for testing. This system instructed drivers to maximize coasting in segregated sections of the network and to match optimal speed limits in busier street sections. The field trials and real daily operations in the Edinburgh Tram Line, U.K., have shown that energy savings of 10%-20% are achievable

Optimal train control on various track alignments considering speed and schedule adherence constraints

The methodology discussed in this dissertation contributes to the field of transit operational control to reduce energy consumption. Due to the recent increase in gasoline cost, a significant number of travelers are shifting from highway modes to public transit, which also induces higher transit energy consumption expenses. This study presents an approach to optimize train motion regimes for various track alignments, which minimizes total energy consumption subject to allowable travel time, maximum operating speed, and maximum acceleration/deceleration rates. The research problem is structured into four cases which consist of the combinations of track alignments (e.g., single vertical alignment and mixed vertical alignment) and the variation of maximum operating speeds (e.g., constant and variable). The Simulated Annealing (SA) approach is employed to search for the optimal train control, called golden run . To accurately estimate energy consumption and travel time, a Train Performance Simulation (TPS) is developed, which replicates train movements determined by a set of dynamic variables (e,g., duration of acceleration and cruising, coasting position, braking position, etc.) as well as operational constraints (e.g., track alignment, speed limit, minimum travel time, etc.) The applicability of the developed methodology is demonstrated with geographic data of two real world rail line segments of The New Haven Line of the Metro North Railroad: Harrison to Rye Stations and East Norwalk to Westport Stations. The results of optimal solutions and sensitivity analyses are presented. The sensitivity analyses enable a transit operator to quantify the impact of the coasting position, travel time constraint, vertical dip of the track alignment, maximum operating speed, and the load and weight of the train to energy consumption. The developed models can assist future rail system with Automatic Train Control (ATC), Automatic Train Operation (ATO) and Positive Train Control (PTC), or conventional railroad systems to improve the planning and operation of signal systems. The optimal train speed profile derived in this study can be considered by the existing signal system for determining train operating speeds over a route

Optimizing speed profiles for sustainable train operation with wayside energy storage systems

Large hauling capability and low rolling resistance has put rail transit at the forefront of mass transportation mode sustainability in terms of congestion mitigation and energy conservation. As such, rail vehicles are one of the least energy-intensive modes of transportation and least environmentally polluting. Despite, these positives, improper driving habits and wastage of the braking energy through dissipation in braking resistors result in unnecessary consumption, extra costs to the operator and increased atmospheric greenhouse gas emissions. This study presents an intelligent method for the optimization of the number and locations of wayside energy storage system (WESS) units that maximize the net benefits of the operation of a rail line. First, the optimized speed profiles with and without WESS is determined for a single alignment segment. Then, using the speed profiles obtained as an input, the number and locations of the WESS units that maximize the net benefit is determined for an entire rail line. The energy recovery methods used comprise optimal coasting, regenerative braking, and positioning of the energy storage devices to achieve maximum receptivity. Coasting saves energy by maintaining motion with propulsion disabled, but this increases the total travel time. Regenerative braking converts the kinetic energy of the train into electrical energy for the powering of subsequent acceleration cycles and although it does not affect travel time, it reduces the time available for coasting, indicative of a tradeoff. The study entails the design of a model that simulates the movement of the train over an existing alignment section while considering alignment topography, speed limits, and train schedule. Since on-time performance is the priority of railroad operations, the simulator instructs the driver to operate according to several motion regimes to optimize the energy consumption while maintaining schedule. The model consists of several time-varying inputs which add increased levels of complexity to the problem. This, in addition to its combinatorial nature, necessitates a heuristic algorithm to solve it, because traditional analytical solution methods are deficient. The optimization problem is solved by applying Genetic Algorithms (GA) because of their ability to search for a global solution in a complex multi-dimensional space. This strategy adds sustainability and reduces the carbon footprint of the operator. A case study is conducted on a single segment of a commuter rail line and yields a 34% energy reduction. The case study is extended to an entire line with multiple segments where the aim is to optimize the locations of wayside energy storage devices (WESS) for maximum economic benefit. It was found that out of the 10 alignment segments in the study, a maximized benefit of over $600,000 was achieved with WESS units installed on only three of those segments. The methods derived in this study can be used to generate speed profiles for planning purposes, to assist in recovery from service disruptions, to plan for infrastructural upgrades related to energy harvesting or to assist in the development of Driver Advisory Systems (DAS)

Scheduling Algorithm for Real-Time Embedded Control Systems using Arduino Board

The time taken for the scheduling task in a control system to reduce the traffic within the system is one of significant field of research in modern era. There are different control systems that require time scheduling such as elevator control system, traffic control system and train control system. Currently, there are unique control logic strategies adopting scheduling algorithm that are implemented in real time systems like earliest deadline first and ant colony optimization. At the same time, the disadvantages possessed by them are the exponential dip in the performance ratio due to over loading. Despite of all the available resources there are many issues faced such as congestion in traffic networks due to non-adaptive scheduling algorithms, etc., which led to several misfortunes and danger for human life. Hence an improved algorithm that increases the efficiency of the system is required to validate the processing time and the deadlines. Our research is focused on validating a proposed idea of using Arduino microcontroller to implement the different scheduling tasks and validate the efficiency of the algorithm to optimize the results of the system. This take cares of assigning the critical paths which priorities the tasks and focuses on reducing the scheduling time. This rapidly increases the processing speed and efficiency of the algorithm. We plan to use the Arduino board which has an inbuilt error detection algorithm that helps in checking whether the time scheduling is done effectively. In the initial phase of the project we develop and fabricate the hardware design using CAD design software packages like Solid Works. This is later employed with suitable environmental interfaces like, sensors and microcontrollers that can work in an adaptable environment as per requirements to validate the scheduling algorithm. The scheduling algorithm can also be used for controlling the current flow and power storage which will contribute a lot in the power consumption aspect. Graphical data interpretation of various algorithms from the past literature is observed and few selected ones are to be implemented in the experimental set up that is built as an initial proof of concept. By analyzing the results from the simulations carried out using the Altera FPGA board with VHDL and Arduino it is clear that we obtain better results using the Arduino board. Finally, to have an extensive study on different intelligent control logics that are used in the above mentioned control systems, we use the prototyped miniature model of an elevator system and a train control system to validate the different disk scheduling approaches like First Come-First Serve (FCFS), Elevator (SCAN) and ant colonization to solve the discrete combinational optimization of the scheduling logic. Initial validation of the system focuses on the effectiveness of using the ant colonization strategies to enhances the efficiency of the scheduling algorithm and optimize it for real time application

Adaptive Railway Traffic Control using Approximate Dynamic Programming

Railway networks around the world have become challenging to operate in recent decades, with a mixture of track layouts running several different classes of trains with varying operational speeds. This complexity has come about as a result of the sustained increase in passenger numbers where in many countries railways are now more popular than ever before as means of commuting to cities. To address operational challenges, governments and railway undertakings are encouraging development of intelligent and digital transport systems to regulate and optimise train operations in real-time to increase capacity and customer satisfaction by improved usage of existing railway infrastructure. Accordingly, this thesis presents an adaptive railway traffic control system for realtime operations based on a data-based approximate dynamic programming (ADP) approach with integrated reinforcement learning (RL). By assessing requirements and opportunities, the controller aims to reduce delays resulting from trains that entered a control area behind schedule by re-scheduling control plans in real-time at critical locations in a timely manner. The present data-based approach depends on an approximation to the value function of dynamic programming after optimisation from a specified state, which is estimated dynamically from operational experience using RL techniques. By using this approximation, ADP avoids extensive explicit evaluation of performance and so reduces the computational burden substantially. In this thesis, formulations of the approximation function and variants of the RL learning techniques used to estimate it are explored. Evaluation of this controller shows considerable improvements in delays by comparison with current industry practices