A 2D DWT architecture suitable for the Embedded Zerotree Wavelet Algorithm

Digital Imaging has had an enormous impact on industrial applications such as the Internet and video-phone systems. However, demand for industrial applications is growing enormously. In particular, internet application users are, growing at a near exponential rate. The sharp increase in applications using digital images has caused much emphasis on the fields of image coding, storage, processing and communications. New techniques are continuously developed with the main aim of increasing efficiency. Image coding is in particular a field of great commercial interest. A digital image requires a large amount of data to be created. This large amount of data causes many problems when storing, transmitting or processing the image. Reducing the amount of data that can be used to represent an image is the main objective of image coding. Since the main objective is to reduce the amount of data that represents an image, various techniques have been developed and are continuously developed to increase efficiency. The JPEG image coding standard has enjoyed widespread acceptance, and the industry continues to explore its various implementation issues. However, recent research indicates multiresolution based image coding is a far superior alternative. A recent development in the field of image coding is the use of Embedded Zerotree Wavelet (EZW) as the technique to achieve image compression. One of The aims of this theses is to explain how this technique is superior to other current coding standards. It will be seen that an essential part orthis method of image coding is the use of multi resolution analysis, a subband system whereby the subbands arc logarithmically spaced in frequency and represent an octave band decomposition. The block structure that implements this function is termed the two dimensional Discrete Wavelet Transform (2D-DWT). The 20 DWT is achieved by several architectures and these are analysed in order to choose the best suitable architecture for the EZW coder. Finally, this architecture is implemented and verified using the Synopsys Behavioural Compiler and recommendations are made based on experimental findings

Sustainable Fault-handling Of Reconfigurable Logic Using Throughput-driven Assessment

A sustainable Evolvable Hardware (EH) system is developed for SRAM-based reconfigurable Field Programmable Gate Arrays (FPGAs) using outlier detection and group testing-based assessment principles. The fault diagnosis methods presented herein leverage throughput-driven, relative fitness assessment to maintain resource viability autonomously. Group testing-based techniques are developed for adaptive input-driven fault isolation in FPGAs, without the need for exhaustive testing or coding-based evaluation. The techniques maintain the device operational, and when possible generate validated outputs throughout the repair process. Adaptive fault isolation methods based on discrepancy-enabled pair-wise comparisons are developed. By observing the discrepancy characteristics of multiple Concurrent Error Detection (CED) configurations, a method for robust detection of faults is developed based on pairwise parallel evaluation using Discrepancy Mirror logic. The results from the analytical FPGA model are demonstrated via a self-healing, self-organizing evolvable hardware system. Reconfigurability of the SRAM-based FPGA is leveraged to identify logic resource faults which are successively excluded by group testing using alternate device configurations. This simplifies the system architect\u27s role to definition of functionality using a high-level Hardware Description Language (HDL) and system-level performance versus availability operating point. System availability, throughput, and mean time to isolate faults are monitored and maintained using an Observer-Controller model. Results are demonstrated using a Data Encryption Standard (DES) core that occupies approximately 305 FPGA slices on a Xilinx Virtex-II Pro FPGA. With a single simulated stuck-at-fault, the system identifies a completely validated replacement configuration within three to five positive tests. The approach demonstrates a readily-implemented yet robust organic hardware application framework featuring a high degree of autonomous self-control

Evolutionary algorithms for synthesis and optimisation of sequential logic circuits

Considerable progress has been made recently 1n the understanding of combinational logic optimization. Consequently a large number of university and industrial Electric Computing Aided Design (ECAD) programs are now available for optimal logic synthesis of combinational circuits. The progress with sequential logic synthesis and optimization, on the other hand, is considerably less mature. In recent years, evolutionary algorithms have been found to be remarkably effective way of using computers for solving difficult problems. This thesis is, in large part, a concentrated effort to apply this philosophy to the synthesis and optimization of sequential circuits. A state assignment based on the use of a Genetic Algorithm (GA) for the optimal synthesis of sequential circuits is presented. The state assignment determines the structure of the sequential circuit realizing the state machine and therefore its area and performances. The synthesis based on the GA approach produced designs with the smallest area to date. Test results on standard fmite state machine (FS:M) benchmarks show that the GA could generate state assignments, which required on average 15.44% fewer gates and 13.47% fewer literals compared with alternative techniques. Hardware evolution is performed through a succeSSlOn of changes/reconfigurations of elementary components, inter-connectivity and selection of the fittest configurations until the target functionality is reached. The thesis presents new approaches, which combine both genetic algorithm for state assignment and extrinsic Evolvable Hardware (EHW) to design sequential logic circuits. The implemented evolutionary algorithms are able to design logic circuits with size and complexity, which have not been demonstrated in published work. There are still plenty of opportunities to develop this new line of research for the synthesis, optimization and test of novel digital, analogue and mixed circuits. This should lead to a new generation of Electronic Design Automation tools.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Energy management engineering : a predictive energy management system incorporating an adaptive neural network for the direct heating of domestic and industrial fluid mediums.

The objective of this research project is to improve the control and provide a more cost-efficient operation in the direct heating of stored domestic or industrial fluid mediums; such to be achieved by means of an intelligent automated energy management system. For the residential customer this system concept applies to the hot water supply as stored in the familiar hot water cylinder; for the industrial or commercial customer the scope is considerably greater with larger quantities and varieties of fluid mediums. Both areas can obtain significant financial savings with improved energy management. Both consumers and power supply and distribution companies will benefit with increased utilisation of cheaper 'off-peak' electricity; reducing costs and spreading the system load demand. The project has focussed on domestic energy management with a definite view to the wider field of industrial applications. Domestic energy control methodology and equipment has not significantly altered for decades. However, computer hardware and software has since then flourished to an unprecedented proportion and has become relatively cheap and versatile; these factors pave the way for the application of computer technology in this area of great potential. The technology allows the implementation of a 'hot water energy management system', which makes a forecast of the hot water demand for the next 24 hours and proceeds to provide this demand in the most efficient manner possible. In the (near) future, the system, known as FEMS for Fluid Energy Management System, is able to take advantage and in fact will promote the use of a retail 'dynamic spot price tariff’. FEMS is a combination of hardware and software developed to replace the existing cylinder thermostat, take care of the necessary data-acquisition and control the cylinder's total energy instead of it's (single point) temperature. This provides, besides heating cost reduction, a greater accuracy, a degree of flexibility, improved feedback, legionella inhibition, and a diagnostic capability. To the domestic consumer the latter three items are of greatest relevance. The crux of the system lies in its predictive ability. Having explored the more conventional alternatives, a suitable solution was found in the utilisation of the Elman recurrent neural networks, which focus on the temporal characteristics of the hot water demand time series and are able to adapt to changing environments, coping with the presence of any non-linearity and noise in the data. Prior to developing FEMS a study was made of the basic fluid behaviour in medium and high pressure domestic hot water cylinders, an area not well-covered to date and of interest to engineers and manufacturers alike. For this step data acquisition equipment and software was purposely created. The control software plus equipment were combined into a fully automated test system with minimal operator input, allowing a large amount of data to be gathered over a period measured in months. A similar system was subsequently used to collect actual hot water demand data from a residential family, and in fact forms the basis for FEMS. Finally an enhanced version of FEMS is discussed and it is shown how the system is able to output multiple prediction and utilise varying tariff rates

An Energy-Efficient and Reliable Data Transmission Scheme for Transmitter-based Energy Harvesting Networks

Energy harvesting technology has been studied to overcome a limited power resource problem for a sensor network. This paper proposes a new data transmission period control and reliable data transmission algorithm for energy harvesting based sensor networks. Although previous studies proposed a communication protocol for energy harvesting based sensor networks, it still needs additional discussion. Proposed algorithm control a data transmission period and the number of data transmission dynamically based on environment information. Through this, energy consumption is reduced and transmission reliability is improved. The simulation result shows that the proposed algorithm is more efficient when compared with previous energy harvesting based communication standard, Enocean in terms of transmission success rate and residual energy.This research was supported by Basic Science Research Program through the National Research Foundation by Korea (NRF) funded by the Ministry of Education, Science and Technology(2012R1A1A3012227)

Evolutionary algorithms for synthesis and optimisation of sequential logic circuits.

Considerable progress has been made recently 1n the understanding ofcombinational logic optimization. Consequently a large number of universityand industrial Electric Computing Aided Design (ECAD) programs are nowavailable for optimal logic synthesis of combinational circuits. The progresswith sequential logic synthesis and optimization, on the other hand, isconsiderably less mature.In recent years, evolutionary algorithms have been found to be remarkablyeffective way of using computers for solving difficult problems. This thesis is,in large part, a concentrated effort to apply this philosophy to the synthesisand optimization of sequential circuits.A state assignment based on the use of a Genetic Algorithm (GA) for theoptimal synthesis of sequential circuits is presented. The state assignmentdetermines the structure of the sequential circuit realizing the state machineand therefore its area and performances. The synthesis based on the GAapproach produced designs with the smallest area to date. Test results onstandard fmite state machine (FS:M) benchmarks show that the GA couldgenerate state assignments, which required on average 15.44% fewer gatesand 13.47% fewer literals compared with alternative techniques.Hardware evolution is performed through a succeSSlOn ofchanges/reconfigurations of elementary components, inter-connectivity andselection of the fittest configurations until the target functionality is reached.The thesis presents new approaches, which combine both genetic algorithmfor state assignment and extrinsic Evolvable Hardware (EHW) to designsequential logic circuits. The implemented evolutionary algorithms are able todesign logic circuits with size and complexity, which have not beendemonstrated in published work.There are still plenty of opportunities to develop this new line of research forthe synthesis, optimization and test of novel digital, analogue and mixedcircuits. This should lead to a new generation of Electronic DesignAutomation tools

Efficient FPGA implementation and power modelling of image and signal processing IP cores

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed

Efficient FPGA implementation and power modelling of image and signal processing IP cores

Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed.EThOS - Electronic Theses Online ServiceGBUnited Kingdo