On Coding and Detection Techniques for Two-Dimensional Magnetic Recording

Edited version embargoed until 15.04.2020 Full version: Access restricted permanently due to 3rd party copyright restrictions. Restriction set on 15/04/2019 by AS, Doctoral CollegeThe areal density growth of magnetic recording systems is fast approaching the superparamagnetic limit for conventional magnetic disks. This is due to the increasing demand for high data storage capacity. Two-dimensional Magnetic Recording (TDMR) is a new technology aimed at increasing the areal density of magnetic recording systems beyond the limit of current disk technology using conventional disk media. However, it relies on advanced coding and signal processing techniques to achieve areal density gains. Current state of the art signal processing for TDMR channel employed iterative decoding with Low Density Parity Check (LDPC) codes, coupled with 2D equalisers and full 2D Maximum Likelihood (ML) detectors. The shortcoming of these algorithms is their computation complexity especially with regards to the ML detectors which is exponential with respect to the number of bits involved. Therefore, robust low-complexity coding, equalisation and detection algorithms are crucial for successful future deployment of the TDMR scheme. This present work is aimed at finding efficient and low-complexity coding, equalisation, detection and decoding techniques for improving the performance of TDMR channel and magnetic recording channel in general. A forward error correction (FEC) scheme of two concatenated single parity bit systems along track separated by an interleaver has been presented for channel with perpendicular magnetic recording (PMR) media. Joint detection decoding algorithm using constrained MAP detector for simultaneous detection and decoding of data with single parity bit system has been proposed. It is shown that using the proposed FEC scheme with the constrained MAP detector/decoder can achieve a gain of up to 3dB over un-coded MAP decoder for 1D interference channel. A further gain of 1.5 dB was achieved by concatenating two interleavers with extra parity bit when data density along track is high. The use of single bit parity code as a run length limited code as well as an error correction code is demonstrated to simplify detection complexity and improve system performance. A low-complexity 2D detection technique for TDMR system with Shingled Magnetic Recording Media (SMR) was also proposed. The technique used the concatenation of 2D MAP detector along track with regular MAP detector across tracks to reduce the complexity order of using full 2D detection from exponential to linear. It is shown that using this technique can improve track density with limited complexity. Two methods of FEC for TDMR channel using two single parity bit systems have been discussed. One using two concatenated single parity bits along track only, separated by a Dithered Relative Prime (DRP) interleaver and the other use the single parity bits in both directions without the DRP interleaver. Consequent to the FEC coding on the channel, a 2D multi-track MAP joint detector decoder has been proposed for simultaneous detection and decoding of the coded single parity bit data. A gain of up to 5dB was achieved using the FEC scheme with the 2D multi-track MAP joint detector decoder over un-coded 2D multi-track MAP detector in TDMR channel. In a situation with high density in both directions, it is shown that FEC coding using two concatenated single parity bits along track separated by DRP interleaver performed better than when the single parity bits are used in both directions without the DRP interleaver.9mobile Nigeri

Applying Machine Learning Techniques to Improve Safety and Mobility of Urban Transportation Systems Using Infrastructure- and Vehicle-Based Sensors

The importance of sensing technologies in the field of transportation is ever increasing. Rapid improvements of cloud computing, Internet of Vehicles (IoV), and intelligent transport system (ITS) enables fast acquisition of sensor data with immediate processing. Machine learning algorithms provide a way to classify or predict outcomes in a selective and timely fashion. High accuracy and increased volatility are the main features of various learning algorithms. In this dissertation, we aim to use infrastructure- and vehicle-based sensors to improve safety and mobility of urban transportation systems. Smartphone sensors were used in the first study to estimate vehicle trajectory using lane change classification. It addresses the research gap in trajectory estimation since all previous studies focused on estimating trajectories at roadway segments only. Being a mobile application-based system, it can readily be used as on-board unit emulators in vehicles that have little or no connectivity. Secondly, smartphone sensors were also used to identify several transportation modes. While this has been studied extensively in the last decade, our method integrates a data augmentation method to overcome the class imbalance problem. Results show that using a balanced dataset improves the classification accuracy of transportation modes. Thirdly, infrastructure-based sensors like the loop detectors and video detectors were used to predict traffic signal states. This system can aid in resolving the complex signal retiming steps that is conventionally used to improve the performance of an intersection. The methodology was transferred to a different intersection where excellent results were achieved. Fourthly, magnetic vehicle detection system (MVDS) was used to generate traffic patterns in crash and non-crash events. Variational Autoencoder was used for the first time in this study as a data generation tool. The results related to sensitivity and specificity were improved by up to 8% as compared to other state-of-the-art data augmentation methods

Energy Data Analytics for Smart Meter Data

The principal advantage of smart electricity meters is their ability to transfer digitized electricity consumption data to remote processing systems. The data collected by these devices make the realization of many novel use cases possible, providing benefits to electricity providers and customers alike. This book includes 14 research articles that explore and exploit the information content of smart meter data, and provides insights into the realization of new digital solutions and services that support the transition towards a sustainable energy system. This volume has been edited by Andreas Reinhardt, head of the Energy Informatics research group at Technische Universität Clausthal, Germany, and Lucas Pereira, research fellow at Técnico Lisboa, Portugal

Computational Intelligence and Complexity Measures for Chaotic Information Processing

This dissertation investigates the application of computational intelligence methods in the analysis of nonlinear chaotic systems in the framework of many known and newly designed complex systems. Parallel comparisons are made between these methods. This provides insight into the difficult challenges facing nonlinear systems characterization and aids in developing a generalized algorithm in computing algorithmic complexity measures, Lyapunov exponents, information dimension and topological entropy. These metrics are implemented to characterize the dynamic patterns of discrete and continuous systems. These metrics make it possible to distinguish order from disorder in these systems. Steps required for computing Lyapunov exponents with a reorthonormalization method and a group theory approach are formalized. Procedures for implementing computational algorithms are designed and numerical results for each system are presented. The advance-time sampling technique is designed to overcome the scarcity of phase space samples and the buffer overflow problem in algorithmic complexity measure estimation in slow dynamics feedback-controlled systems. It is proved analytically and tested numerically that for a quasiperiodic system like a Fibonacci map, complexity grows logarithmically with the evolutionary length of the data block. It is concluded that a normalized algorithmic complexity measure can be used as a system classifier. This quantity turns out to be one for random sequences and a non-zero value less than one for chaotic sequences. For periodic and quasi-periodic responses, as data strings grow their normalized complexity approaches zero, while a faster deceasing rate is observed for periodic responses. Algorithmic complexity analysis is performed on a class of certain rate convolutional encoders. The degree of diffusion in random-like patterns is measured. Simulation evidence indicates that algorithmic complexity associated with a particular class of 1/n-rate code increases with the increase of the encoder constraint length. This occurs in parallel with the increase of error correcting capacity of the decoder. Comparing groups of rate-1/n convolutional encoders, it is observed that as the encoder rate decreases from 1/2 to 1/7, the encoded data sequence manifests smaller algorithmic complexity with a larger free distance value

NASA Tech Briefs, December 1990

Topics: New Product Ideas; NASA TU Services; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences

Index to 1985 NASA Tech Briefs, volume 10, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1985 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

Learning Biosignals with Deep Learning

The healthcare system, which is ubiquitously recognized as one of the most influential system in society, is facing new challenges since the start of the decade.The myriad of physiological data generated by individuals, namely in the healthcare system, is generating a burden on physicians, losing effectiveness on the collection of patient data. Information systems and, in particular, novel deep learning (DL) algorithms have been prompting a way to take this problem. This thesis has the aim to have an impact in biosignal research and industry by presenting DL solutions that could empower this field. For this purpose an extensive study of how to incorporate and implement Convolutional Neural Networks (CNN), Recursive Neural Networks (RNN) and Fully Connected Networks in biosignal studies is discussed. Different architecture configurations were explored for signal processing and decision making and were implemented in three different scenarios: (1) Biosignal learning and synthesis; (2) Electrocardiogram (ECG) biometric systems, and; (3) Electrocardiogram (ECG) anomaly detection systems. In (1) a RNN-based architecture was able to replicate autonomously three types of biosignals with a high degree of confidence. As for (2) three CNN-based architectures, and a RNN-based architecture (same used in (1)) were used for both biometric identification, reaching values above 90% for electrode-base datasets (Fantasia, ECG-ID and MIT-BIH) and 75% for off-person dataset (CYBHi), and biometric authentication, achieving Equal Error Rates (EER) of near 0% for Fantasia and MIT-BIH and bellow 4% for CYBHi. As for (3) the abstraction of healthy clean the ECG signal and detection of its deviation was made and tested in two different scenarios: presence of noise using autoencoder and fully-connected network (reaching 99% accuracy for binary classification and 71% for multi-class), and; arrhythmia events by including a RNN to the previous architecture (57% accuracy and 61% sensitivity). In sum, these systems are shown to be capable of producing novel results. The incorporation of several AI systems into one could provide to be the next generation of preventive medicine, as the machines have access to different physiological and anatomical states, it could produce more informed solutions for the issues that one may face in the future increasing the performance of autonomous preventing systems that could be used in every-day life in remote places where the access to medicine is limited. These systems will also help the study of the signal behaviour and how they are made in real life context as explainable AI could trigger this perception and link the inner states of a network with the biological traits.O sistema de saúde, que é ubiquamente reconhecido como um dos sistemas mais influentes da sociedade, enfrenta novos desafios desde o ínicio da década. A miríade de dados fisiológicos gerados por indíviduos, nomeadamente no sistema de saúde, está a gerar um fardo para os médicos, perdendo a eficiência no conjunto dos dados do paciente. Os sistemas de informação e, mais espcificamente, da inovação de algoritmos de aprendizagem profunda (DL) têm sido usados na procura de uma solução para este problema. Esta tese tem o objetivo de ter um impacto na pesquisa e na indústria de biosinais, apresentando soluções de DL que poderiam melhorar esta área de investigação. Para esse fim, é discutido um extenso estudo de como incorporar e implementar redes neurais convolucionais (CNN), redes neurais recursivas (RNN) e redes totalmente conectadas para o estudo de biosinais. Diferentes arquiteturas foram exploradas para processamento e tomada de decisão de sinais e foram implementadas em três cenários diferentes: (1) Aprendizagem e síntese de biosinais; (2) sistemas biométricos com o uso de eletrocardiograma (ECG), e; (3) Sistema de detecção de anomalias no ECG. Em (1) uma arquitetura baseada na RNN foi capaz de replicar autonomamente três tipos de sinais biológicos com um alto grau de confiança. Quanto a (2) três arquiteturas baseadas em CNN e uma arquitetura baseada em RNN (a mesma usada em (1)) foram usadas para ambas as identificações, atingindo valores acima de 90 % para conjuntos de dados à base de eletrodos (Fantasia, ECG-ID e MIT -BIH) e 75 % para o conjunto de dados fora da pessoa (CYBHi) e autenticação, atingindo taxas de erro iguais (EER) de quase 0 % para Fantasia e MIT-BIH e abaixo de 4 % para CYBHi. Quanto a (3) a abstração de sinais limpos e assimptomáticos de ECG e a detecção do seu desvio foram feitas e testadas em dois cenários diferentes: na presença de ruído usando um autocodificador e uma rede totalmente conectada (atingindo 99 % de precisão na classificação binária e 71 % na multi-classe), e; eventos de arritmia incluindo um RNN na arquitetura anterior (57 % de precisão e 61 % de sensibilidade). Em suma, esses sistemas são mais uma vez demonstrados como capazes de produzir resultados inovadores. A incorporação de vários sistemas de inteligência artificial em um unico sistema pederá desencadear a próxima geração de medicina preventiva. Os algoritmos ao terem acesso a diferentes estados fisiológicos e anatómicos, podem produzir soluções mais informadas para os problemas que se possam enfrentar no futuro, aumentando o desempenho de sistemas autónomos de prevenção que poderiam ser usados na vida quotidiana, nomeadamente em locais remotos onde o acesso à medicinas é limitado. Estes sistemas também ajudarão o estudo do comportamento do sinal e como eles são feitos no contexto da vida real, pois a IA explicável pode desencadear essa percepção e vincular os estados internos de uma rede às características biológicas

Convergence of Intelligent Data Acquisition and Advanced Computing Systems

This book is a collection of published articles from the Sensors Special Issue on "Convergence of Intelligent Data Acquisition and Advanced Computing Systems". It includes extended versions of the conference contributions from the 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS’2019), Metz, France, as well as external contributions

Real-time neural signal processing and low-power hardware co-design for wireless implantable brain machine interfaces

Intracortical Brain-Machine Interfaces (iBMIs) have advanced significantly over the past two decades, demonstrating their utility in various aspects, including neuroprosthetic control and communication. To increase the information transfer rate and improve the devices’ robustness and longevity, iBMI technology aims to increase channel counts to access more neural data while reducing invasiveness through miniaturisation and avoiding percutaneous connectors (wired implants). However, as the number of channels increases, the raw data bandwidth required for wireless transmission also increases becoming prohibitive, requiring efficient on-implant processing to reduce the amount of data through data compression or feature extraction. The fundamental aim of this research is to develop methods for high-performance neural spike processing co-designed within low-power hardware that is scaleable for real-time wireless BMI applications. The specific original contributions include the following: Firstly, a new method has been developed for hardware-efficient spike detection, which achieves state-of-the-art spike detection performance and significantly reduces the hardware complexity. Secondly, a novel thresholding mechanism for spike detection has been introduced. By incorporating firing rate information as a key determinant in establishing the spike detection threshold, we have improved the adaptiveness of spike detection. This eventually allows the spike detection to overcome the signal degradation that arises due to scar tissue growth around the recording site, thereby ensuring enduringly stable spike detection results. The long-term decoding performance, as a consequence, has also been improved notably. Thirdly, the relationship between spike detection performance and neural decoding accuracy has been investigated to be nonlinear, offering new opportunities for further reducing transmission bandwidth by at least 30% with minor decoding performance degradation. In summary, this thesis presents a journey toward designing ultra-hardware-efficient spike detection algorithms and applying them to reduce the data bandwidth and improve neural decoding performance. The software-hardware co-design approach is essential for the next generation of wireless brain-machine interfaces with increased channel counts and a highly constrained hardware budget. The fundamental aim of this research is to develop methods for high-performance neural spike processing co-designed within low-power hardware that is scaleable for real-time wireless BMI applications. The specific original contributions include the following: Firstly, a new method has been developed for hardware-efficient spike detection, which achieves state-of-the-art spike detection performance and significantly reduces the hardware complexity. Secondly, a novel thresholding mechanism for spike detection has been introduced. By incorporating firing rate information as a key determinant in establishing the spike detection threshold, we have improved the adaptiveness of spike detection. This eventually allows the spike detection to overcome the signal degradation that arises due to scar tissue growth around the recording site, thereby ensuring enduringly stable spike detection results. The long-term decoding performance, as a consequence, has also been improved notably. Thirdly, the relationship between spike detection performance and neural decoding accuracy has been investigated to be nonlinear, offering new opportunities for further reducing transmission bandwidth by at least 30\% with only minor decoding performance degradation. In summary, this thesis presents a journey toward designing ultra-hardware-efficient spike detection algorithms and applying them to reduce the data bandwidth and improve neural decoding performance. The software-hardware co-design approach is essential for the next generation of wireless brain-machine interfaces with increased channel counts and a highly constrained hardware budget.Open Acces