On-Line Dependability Enhancement of Multiprocessor SoCs by Resource Management

This paper describes a new approach towards dependable design of homogeneous multi-processor SoCs in an example satellite-navigation application. First, the NoC dependability is functionally verified via embedded software. Then the Xentium processor tiles are periodically verified via on-line self-testing techniques, by using a new IIP Dependability Manager. Based on the Dependability Manager results, faulty tiles are electronically excluded and replaced by fault-free spare tiles via on-line resource management. This integrated approach enables fast electronic fault detection/diagnosis and repair, and hence a high system availability. The dependability application runs in parallel with the actual application, resulting in a very dependable system. All parts have been verified by simulation

Concurrent Online Testing for Many Core Systems-on-Chips

Shrinking transistor sizes have introduced new challenges and opportunities for system-on-chip (SoC) design and reliability. Smaller transistors are more susceptible to early lifetime failure and electronic wear-out, greatly reducing their reliable lifetimes. However, smaller transistors will also allow SoC to contain hundreds of processing cores and other infrastructure components with the potential for increased reliability through massive structural redundancy. Concurrent online testing (COLT) can provide sufficient reliability and availability to systems with this redundancy. COLT manages the process of testing a subset of processing cores while the rest of the system remains operational. This can be considered a temporary, graceful degradation of system performance that increases reliability while maintaining availability. In this dissertation, techniques to assist COLT are proposed and analyzed. The techniques described in this dissertation focus on two major aspects of COLT feasibility: recovery time and test delivery costs. To reduce the time between failure and recovery, and thereby increase system availability, an anomaly-based test triggering unit (ATTU) is proposed to initiate COLT when anomalous network behavior is detected. Previous COLT techniques have relied on initiating tests periodically. However, determining the testing period is based on a device's mean time between failures (MTBF), and calculating MTBF is exceedingly difficult and imprecise. To address the test delivery costs associated with COLT, a distributed test vector storage (DTVS) technique is proposed to eliminate the dependency of test delivery costs on core location. Previous COLT techniques have relied on a single location to store test vectors, and it has been demonstrated that centralized storage of tests scales poorly as the number of cores per SoC grows. Assuming that the SoC organizes its processing cores with a regular topology, DTVS uses an interleaving technique to optimally distribute the test vectors across the entire chip. DTVS is analyzed both empirically and analytically, and a testing protocol using DTVS is described. COLT is only feasible if the applications running concurrently are largely unaffected. The effect of COLT on application execution time is also measured in this dissertation, and an application-aware COLT protocol is proposed and analyzed. Application interference is greatly reduced through this technique

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Mixed-Criticality Systems on Commercial-Off-the-Shelf Multi-Processor Systems-on-Chip

Avionics and space industries are struggling with the adoption of technologies like multi-processor system-on-chips (MPSoCs) due to strict safety requirements. This thesis propose a new reference architecture for MPSoC-based mixed-criticality systems (MCS) - i.e., systems integrating applications with different level of criticality - which are a common use case for aforementioned industries. This thesis proposes a system architecture capable of granting partitioning - which is, for short, the property of fault containment. It is based on the detection of spatial and temporal interference, and has been named the online detection of interference (ODIn) architecture. Spatial partitioning requires that an application is not able to corrupt resources used by a different application. In the architecture proposed in this thesis, spatial partitioning is implemented using type-1 hypervisors, which allow definition of resource partitions. An application running in a partition can only access resources granted to that partition, therefore it cannot corrupt resources used by applications running in other partitions. Temporal partitioning requires that an application is not able to unexpectedly change the execution time of other applications. In the proposed architecture, temporal partitioning has been solved using a bounded interference approach, composed of an offline analysis phase and an online safety net. The offline phase is based on a statistical profiling of a metric sensitive to temporal interference’s, performed in nominal conditions, which allows definition of a set of three thresholds: 1. the detection threshold TD; 2. the warning threshold TW ; 3. the α threshold. Two rules of detection are defined using such thresholds: Alarm rule When the value of the metric is above TD. Warning rule When the value of the metric is in the warning region [TW ;TD] for more than α consecutive times. ODIn’s online safety-net exploits performance counters, available in many MPSoC architectures; such counters are configured at bootstrap to monitor the selected metric(s), and to raise an interrupt request (IRQ) in case the metric value goes above TD, implementing the alarm rule. The warning rule is implemented in a software detection module, which reads the value of performance counters when the monitored task yields control to the scheduler and reset them if there is no detection. ODIn also uses two additional detection mechanisms: 1. a control flow check technique, based on compile-time defined block signatures, is implemented through a set of watchdog processors, each monitoring one partition. 2. a timeout is implemented through a system watchdog timer (SWDT), which is able to send an external signal when the timeout is violated. The recovery actions implemented in ODIn are: • graceful degradation, to react to IRQs of WDPs monitoring non-critical applications or to warning rule violations; it temporarily stops non-critical applications to grant resources to the critical application; • hard recovery, to react to the SWDT, to the WDP of the critical application, or to alarm rule violations; it causes a switch to a hot stand-by spare computer. Experimental validation of ODIn was performed on two hardware platforms: the ZedBoard - dual-core - and the Inventami board - quad-core. A space benchmark and an avionic benchmark were implemented on both platforms, composed by different modules as showed in Table 1 Each version of the final application was evaluated through fault injection (FI) campaigns, performed using a specifically designed FI system. There were three types of FI campaigns: 1. HW FI, to emulate single event effects; 2. SW FI, to emulate bugs in non-critical applications; 3. artificial bug FI, to emulate a bug in non-critical applications introducing unexpected interference on the critical application. Experimental results show that ODIn is resilient to all considered types of faul

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

A Scalable and Adaptive Network on Chip for Many-Core Architectures

In this work, a scalable network on chip (NoC) for future many-core architectures is proposed and investigated. It supports different QoS mechanisms to ensure predictable communication. Self-optimization is introduced to adapt the energy footprint and the performance of the network to the communication requirements. A fault tolerance concept allows to deal with permanent errors. Moreover, a template-based automated evaluation and design methodology and a synthesis flow for NoCs is introduced

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed