Integrating wireless technologies into intra-vehicular communication

With the emergence of connected and autonomous vehicles, sensors are increasingly deployed within car. Traffic generated by these sensors congest traditional intra-vehicular networks, such as CAN buses. Furthermore, the large amount of wires needed to connect sensors makes it hard to design cars in a modular way. These limitations have created impetus to use wireless technologies to support intra-vehicular communication. In this dissertation, we tackle the challenge of designing and evaluating data collection protocols for intra-car networks that can operate reliably and efficiently under dynamic channel conditions. First, we evaluate the feasibility of deploying an intra-car wireless network based on the Backpressure Collection Protocol (BCP), which is theoretically proven to be throughput-optimal. We uncover a surprising behavior in which, under certain dynamic channel conditions, the average packet delay of BCP decreases with the traffic load. We propose and analyze a queueing-theoretic model to shed light into the observed phenomenon. As a solution, we propose a new protocol, called replication-based LIFO-backpressure (RBL). Analytical and simulation results indicate that RBL dramatically reduces the delay of BCP at low load, while maintaining its high throughput performance. Next, we propose and implement a hybrid wired/wireless architecture, in which each node is connected to either a wired interface or a wireless interface or both. We propose a new protocol, called Hybrid-Backpressure Collection Protocol (Hybrid-BCP), for the intra-car hybrid networks. Our testbed implementation, based on CAN and ZigBee transceivers, demonstrates the load balancing and routing functionalities of Hybrid-BCP and its resilience to DoS attacks. We further provide simulation results, obtained based on real intra-car RSSI traces, showing that Hybrid-BCP can achieve the same performance as a tree-based protocol while reducing the radio transmission power by a factor of 10. Finally, we present TeaCP, a prototype Toolkit for the evaluation and analysis of Collection Protocols in both simulation and experimental environments. TeaCP evaluates a wide range of standard performance metrics, such as reliability, throughput, and latency. TeaCP further allows visualization of routes and network topology evolution. Through simulation of an intra-car WSN and real lab experiments, we demonstrate the functionality of TeaCP for comparing different collection protocols

A Survey on Delay-Aware Resource Control for Wireless Systems --- Large Deviation Theory, Stochastic Lyapunov Drift and Distributed Stochastic Learning

In this tutorial paper, a comprehensive survey is given on several major systematic approaches in dealing with delay-aware control problems, namely the equivalent rate constraint approach, the Lyapunov stability drift approach and the approximate Markov Decision Process (MDP) approach using stochastic learning. These approaches essentially embrace most of the existing literature regarding delay-aware resource control in wireless systems. They have their relative pros and cons in terms of performance, complexity and implementation issues. For each of the approaches, the problem setup, the general solution and the design methodology are discussed. Applications of these approaches to delay-aware resource allocation are illustrated with examples in single-hop wireless networks. Furthermore, recent results regarding delay-aware multi-hop routing designs in general multi-hop networks are elaborated. Finally, the delay performance of the various approaches are compared through simulations using an example of the uplink OFDMA systems.Comment: 58 pages, 8 figures; IEEE Transactions on Information Theory, 201

A survey of potential security issues in existing wireless sensor network protocols

The increasing pervasiveness of wireless sensor networks (WSNs) in diverse application domains including critical infrastructure systems, sets an extremely high security bar in the design of WSN systems to exploit their full benefits, increasing trust while avoiding loss. Nevertheless, a combination of resource restrictions and the physical exposure of sensor devices inevitably cause such networks to be vulnerable to security threats, both external and internal. While several researchers have provided a set of open problems and challenges in WSN security and privacy, there is a gap in the systematic study of the security implications arising from the nature of existing communication protocols in WSNs. Therefore, we have carried out a deep-dive into the main security mechanisms and their effects on the most popular protocols and standards used in WSN deployments, i.e., IEEE 802.15.4, Berkeley media access control for low-power sensor networks, IPv6 over low-power wireless personal area networks, outing protocol for routing protocol for low-power and lossy networks (RPL), backpressure collection protocol, collection tree protocol, and constrained application protocol, where potential security threats and existing countermeasures are discussed at each layer of WSN stack. This paper culminates in a deeper analysis of network layer attacks deployed against the RPL routing protocol. We quantify the impact of individual attacks on the performance of a network using the Cooja network simulator. Finally, we discuss new research opportunities in network layer security and how to use Cooja as a benchmark for developing new defenses for WSN systems

LHC-ATLAS実験における高速飛跡再構成システム(FTK)の構築

早大学位記番号:新7701早稲田大

Socio-economic aware data forwarding in mobile sensing networks and systems

The vision for smart sustainable cities is one whereby urban sensing is core to optimising city operation which in turn improves citizen contentment. Wireless Sensor Networks are envisioned to become pervasive form of data collection and analysis for smart cities but deployment of millions of inter-connected sensors in a city can be cost-prohibitive. Given the ubiquity and ever-increasing capabilities of sensor-rich mobile devices, Wireless Sensor Networks with Mobile Phones (WSN-MP) provide a highly flexible and ready-made wireless infrastructure for future smart cities. In a WSN-MP, mobile phones not only generate the sensing data but also relay the data using cellular communication or short range opportunistic communication. The largest challenge here is the efficient transmission of potentially huge volumes of sensor data over sometimes meagre or faulty communications networks in a cost-effective way. This thesis investigates distributed data forwarding schemes in three types of WSN-MP: WSN with mobile sinks (WSN-MS), WSN with mobile relays (WSN-HR) and Mobile Phone Sensing Systems (MPSS). For these dynamic WSN-MP, realistic models are established and distributed algorithms are developed for efficient network performance including data routing and forwarding, sensing rate control and and pricing. This thesis also considered realistic urban sensing issues such as economic incentivisation and demonstrates how social network and mobility awareness improves data transmission. Through simulations and real testbed experiments, it is shown that proposed algorithms perform better than state-of-the-art schemes.Open Acces

The Benefit of Hindsight: Tracing Edge-Cases in Distributed Systems

Today's distributed tracing frameworks are ill-equipped to troubleshoot rareedge-case requests. The crux of the problem is a trade-off between specificityand overhead. On the one hand, frameworks can indiscriminately select requeststo trace when they enter the system (head sampling), but this is unlikely tocapture a relevant edge-case trace because the framework cannot know whichrequests will be problematic until after-the-fact. On the other hand,frameworks can trace everything and later keep only the interesting edge-casetraces (tail sampling), but this has high overheads on the traced applicationand enormous data ingestion costs. In this paper we circumvent this trade-off for any edge-case with symptomsthat can be programmatically detected, such as high tail latency, errors, andbottlenecked queues. We propose a lightweight and always-on distributed tracingsystem, Hindsight, which implements a retroactive sampling abstraction: insteadof eagerly ingesting and processing traces, Hindsight lazily retrieves tracedata only after symptoms of a problem are detected. Hindsight is analogous to acar dash-cam that, upon detecting a sudden jolt in momentum, persists the lasthour of footage. Developers using Hindsight receive the exact edge-case tracesthey desire without undue overhead or dependence on luck. Our evaluation showsthat Hindsight scales to millions of requests per second, adds nanosecond-leveloverhead to generate trace data, handles GB/s of data per node, transparentlyintegrates with existing distributed tracing systems, and successfully persistsfull, detailed traces in real-world use cases when edge-case problems aredetected.<br

Reducing Internet Latency : A Survey of Techniques and their Merit

Bob Briscoe, Anna Brunstrom, Andreas Petlund, David Hayes, David Ros, Ing-Jyh Tsang, Stein Gjessing, Gorry Fairhurst, Carsten Griwodz, Michael WelzlPeer reviewedPreprin

Bio-Inspired Tools for a Distributed Wireless Sensor Network Operating System

The problem which I address in this thesis is to find a way to organise and manage a network of wireless sensor nodes using a minimal amount of communication. To find a solution I explore the use of Bio-inspired protocols to enable WSN management while maintaining a low communication overhead. Wireless Sensor Networks (WSNs) are loosely coupled distributed systems comprised of low-resource, battery powered sensor nodes. The largest problem with WSN management is that communication is the largest consumer of a sensor node’s energy. WSN management systems need to use as little communication as possible to prolong their operational lifetimes. This is the Wireless Sensor Network Management Problem. This problem is compounded because current WSN management systems glue together unrelated protocols to provide system services causing inter-protocol interference. Bio-inspired protocols provide a good solution because they enable the nodes to self-organise, use local area communication, and can combine their communication in an intelligent way with minimal increase in communication. I present a combined protocol and MAC scheduler to enable multiple service protocols to function in a WSN at the same time without causing inter-protocol interference. The scheduler is throughput optimal as long as the communication requirements of all of the protocols remain within the communication capacity of the network. I show that the scheduler improves a dissemination protocol’s performance by 35%. A bio-inspired synchronisation service is presented which enables wireless sensor nodes to self organise and provide a time service. Evaluation of the protocol shows an 80% saving in communication over similar bio-inspired synchronisation approaches. I then add an information dissemination protocol, without significantly increasing communication. This is achieved through the ability of our bio-inspired algorithms to combine their communication in an intelligent way so that they are able to offer multiple services without requiring a great deal of inter-node communication.Open Acces

Application-Specific Memory Subsystems

The disparity in performance between processors and main memories has led computer architects to incorporate large cache hierarchies in modern computers. These cache hierarchies are designed to be general-purpose in that they strive to provide the best possible performance across a wide range of applications. However, such a memory subsystem does not necessarily provide the best possible performance for a particular application. Although general-purpose memory subsystems are desirable when the work-load is unknown and the memory subsystem must remain fixed, when this is not the case a custom memory subsystem may be beneficial. For example, in an application-specific integrated circuit (ASIC) or a field-programmable gate array (FPGA) designed to run a particular application, a custom memory subsystem optimized for that application would be desirable. In addition, when there are tunable parameters in the memory subsystem, it may make sense to change these parameters depending on the application being run. Such a situation arises today with FPGAs and, to a lesser extent, GPUs, and it is plausible that general-purpose computers will begin to support greater flexibility in the memory subsystem in the future. In this dissertation, we first show that it is possible to create application-specific memory subsystems that provide much better performance than a general-purpose memory subsystem. In addition, we show a way to discover such memory subsystems automatically using a superoptimization technique on memory address traces gathered from applications. This allows one to generate a custom memory subsystem with little effort. We next show that our memory subsystem superoptimization technique can be used to optimize for objectives other than performance. As an example, we show that it is possible to reduce the number of writes to the main memory, which can be useful for main memories with limited write durability, such as flash or Phase-Change Memory (PCM). Finally, we show how to superoptimize memory subsystems for streaming applications, which are a class of parallel applications. In particular, we show that, through the use of ScalaPipe, we can author and deploy streaming applications targeting FPGAs with superoptimized memory subsystems. ScalaPipe is a domain-specific language (DSL) embedded in the Scala programming language for generating streaming applications that can be implemented on CPUs and FPGAs. Using the ScalaPipe implementation, we are able to demonstrate actual performance improvements using the superoptimized memory subsystem with applications implemented in hardware