50 research outputs found
MIMO-UFMC Transceiver Schemes for Millimeter Wave Wireless Communications
The UFMC modulation is among the most considered solutions for the
realization of beyond-OFDM air interfaces for future wireless networks. This
paper focuses on the design and analysis of an UFMC transceiver equipped with
multiple antennas and operating at millimeter wave carrier frequencies. The
paper provides the full mathematical model of a MIMO-UFMC transceiver, taking
into account the presence of hybrid analog/digital beamformers at both ends of
the communication links. Then, several detection structures are proposed, both
for the case of single-packet isolated transmission, and for the case of
multiple-packet continuous transmission. In the latter situation, the paper
also considers the case in which no guard time among adjacent packets is
inserted, trading off an increased level of interference with higher values of
spectral efficiency. At the analysis stage, the several considered detection
structures and transmission schemes are compared in terms of bit-error-rate,
root-mean-square-error, and system throughput. The numerical results show that
the proposed transceiver algorithms are effective and that the linear MMSE data
detector is capable of well managing the increased interference brought by the
removal of guard times among consecutive packets, thus yielding throughput
gains of about 10 - 13 . The effect of phase noise at the receiver is also
numerically assessed, and it is shown that the recursive implementation of the
linear MMSE exhibits some degree of robustness against this disturbance
Ondas milimétricas e MIMO massivo para otimização da capacidade e cobertura de redes heterogeneas de 5G
Today's Long Term Evolution Advanced (LTE-A) networks cannot support
the exponential growth in mobile traffic forecast for the next decade. By
2020, according to Ericsson, 6 billion mobile subscribers worldwide are projected
to generate 46 exabytes of mobile data traffic monthly from 24 billion
connected devices, smartphones and short-range Internet of Things (IoT)
devices being the key prosumers. In response, 5G networks are foreseen
to markedly outperform legacy 4G systems. Triggered by the International
Telecommunication Union (ITU) under the IMT-2020 network initiative, 5G
will support three broad categories of use cases: enhanced mobile broadband
(eMBB) for multi-Gbps data rate applications; ultra-reliable and low latency
communications (URLLC) for critical scenarios; and massive machine
type communications (mMTC) for massive connectivity. Among the several
technology enablers being explored for 5G, millimeter-wave (mmWave)
communication, massive MIMO antenna arrays and ultra-dense small cell
networks (UDNs) feature as the dominant technologies. These technologies
in synergy are anticipated to provide the 1000_ capacity increase for 5G
networks (relative to 4G) through the combined impact of large additional
bandwidth, spectral efficiency (SE) enhancement and high frequency reuse,
respectively. However, although these technologies can pave the way towards
gigabit wireless, there are still several challenges to solve in terms of
how we can fully harness the available bandwidth efficiently through appropriate
beamforming and channel modeling approaches. In this thesis, we
investigate the system performance enhancements realizable with mmWave
massive MIMO in 5G UDN and cellular infrastructure-to-everything (C-I2X)
application scenarios involving pedestrian and vehicular users. As a critical
component of the system-level simulation approach adopted in this thesis,
we implemented 3D channel models for the accurate characterization of the
wireless channels in these scenarios and for realistic performance evaluation.
To address the hardware cost, complexity and power consumption of the
massive MIMO architectures, we propose a novel generalized framework for
hybrid beamforming (HBF) array structures. The generalized model reveals
the opportunities that can be harnessed with the overlapped subarray structures
for a balanced trade-o_ between SE and energy efficiently (EE) of 5G
networks. The key results in this investigation show that mmWave massive
MIMO can deliver multi-Gbps rates for 5G whilst maintaining energy-efficient operation of the network.As redes LTE-A atuais não são capazes de suportar o crescimento exponencial
de tráfego que está previsto para a próxima década. De acordo
com a previsão da Ericsson, espera-se que em 2020, a nível global, 6 mil
milhões de subscritores venham a gerar mensalmente 46 exa bytes de tráfego
de dados a partir de 24 mil milhões de dispositivos ligados à rede móvel,
sendo os telefones inteligentes e dispositivos IoT de curto alcance os principais
responsáveis por tal nível de tráfego. Em resposta a esta exigência,
espera-se que as redes de 5a geração (5G) tenham um desempenho substancialmente
superior às redes de 4a geração (4G) atuais. Desencadeado pelo
UIT (União Internacional das Telecomunicações) no âmbito da iniciativa
IMT-2020, o 5G irá suportar três grandes tipos de utilizações: banda larga
móvel capaz de suportar aplicações com débitos na ordem de vários Gbps;
comunicações de baixa latência e alta fiabilidade indispensáveis em cenários
de emergência; comunicações massivas máquina-a-máquina para conectividade
generalizada. Entre as várias tecnologias capacitadoras que estão a ser
exploradas pelo 5G, as comunicações através de ondas milimétricas, os agregados
MIMO massivo e as redes celulares ultradensas (RUD) apresentam-se
como sendo as tecnologias fundamentais. Antecipa-se que o conjunto
destas tecnologias venha a fornecer às redes 5G um aumento de capacidade
de 1000x através da utilização de maiores larguras de banda, melhoria da
eficiência espectral, e elevada reutilização de frequências respetivamente.
Embora estas tecnologias possam abrir caminho para as redes sem fios
com débitos na ordem dos gigabits, existem ainda vários desafios que têm
que ser resolvidos para que seja possível aproveitar totalmente a largura de
banda disponível de maneira eficiente utilizando abordagens de formatação
de feixe e de modelação de canal adequadas. Nesta tese investigamos a
melhoria de desempenho do sistema conseguida através da utilização de
ondas milimétricas e agregados MIMO massivo em cenários de redes celulares
ultradensas de 5a geração e em cenários 'infraestrutura celular-para-qualquer
coisa' (do inglês: cellular infrastructure-to-everything) envolvendo
utilizadores pedestres e veiculares. Como um componente fundamental das
simulações de sistema utilizadas nesta tese é o canal de propagação, implementamos modelos de canal tridimensional (3D) para caracterizar de
forma precisa o canal de propagação nestes cenários e assim conseguir uma
avaliação de desempenho mais condizente com a realidade. Para resolver os
problemas associados ao custo do equipamento, complexidade e consumo
de energia das arquiteturas MIMO massivo, propomos um modelo inovador
de agregados com formatação de feixe híbrida. Este modelo genérico revela
as oportunidades que podem ser aproveitadas através da sobreposição
de sub-agregados no sentido de obter um compromisso equilibrado entre
eficiência espectral (ES) e eficiência energética (EE) nas redes 5G. Os principais
resultados desta investigação mostram que a utilização conjunta de
ondas milimétricas e de agregados MIMO massivo possibilita a obtenção, em
simultâneo, de taxas de transmissão na ordem de vários Gbps e a operação
de rede de forma energeticamente eficiente.Programa Doutoral em Telecomunicaçõe
6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities
Mobile communications have been undergoing a generational change every ten
years or so. However, the time difference between the so-called "G's" is also
decreasing. While fifth-generation (5G) systems are becoming a commercial
reality, there is already significant interest in systems beyond 5G, which we
refer to as the sixth-generation (6G) of wireless systems. In contrast to the
already published papers on the topic, we take a top-down approach to 6G. We
present a holistic discussion of 6G systems beginning with lifestyle and
societal changes driving the need for next generation networks. This is
followed by a discussion into the technical requirements needed to enable 6G
applications, based on which we dissect key challenges, as well as
possibilities for practically realizable system solutions across all layers of
the Open Systems Interconnection stack. Since many of the 6G applications will
need access to an order-of-magnitude more spectrum, utilization of frequencies
between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G
eco-system will feature a diverse range of frequency bands, ranging from below
6 GHz up to 1 THz. We comprehensively characterize the limitations that must be
overcome to realize working systems in these bands; and provide a unique
perspective on the physical, as well as higher layer challenges relating to the
design of next generation core networks, new modulation and coding methods,
novel multiple access techniques, antenna arrays, wave propagation,
radio-frequency transceiver design, as well as real-time signal processing. We
rigorously discuss the fundamental changes required in the core networks of the
future that serves as a major source of latency for time-sensitive
applications. While evaluating the strengths and weaknesses of key 6G
technologies, we differentiate what may be achievable over the next decade,
relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages,
10 figures, 5 table
On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds
Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed
6G Enabled Advanced Transportation Systems
The 6th generation (6G) wireless communication network is envisaged to be
able to change our lives drastically, including transportation. In this paper,
two ways of interactions between 6G communication networks and transportation
are introduced. With the new usage scenarios and capabilities 6G is going to
support, passengers on all sorts of transportation systems will be able to get
data more easily, even in the most remote areas on the planet. The quality of
communication will also be improved significantly, thanks to the advanced
capabilities of 6G. On top of providing seamless and ubiquitous connectivity to
all forms of transportation, 6G will also transform the transportation systems
to make them more intelligent, more efficient, and safer. Based on the latest
research and standardization progresses, technical analysis on how 6G can
empower advanced transportation systems are provided, as well as challenges and
insights for a possible road ahead.Comment: Submitted to an open access journa
A Tutorial on Extremely Large-Scale MIMO for 6G: Fundamentals, Signal Processing, and Applications
Extremely large-scale multiple-input-multiple-output (XL-MIMO), which offers
vast spatial degrees of freedom, has emerged as a potentially pivotal enabling
technology for the sixth generation (6G) of wireless mobile networks. With its
growing significance, both opportunities and challenges are concurrently
manifesting. This paper presents a comprehensive survey of research on XL-MIMO
wireless systems. In particular, we introduce four XL-MIMO hardware
architectures: uniform linear array (ULA)-based XL-MIMO, uniform planar array
(UPA)-based XL-MIMO utilizing either patch antennas or point antennas, and
continuous aperture (CAP)-based XL-MIMO. We comprehensively analyze and discuss
their characteristics and interrelationships. Following this, we examine exact
and approximate near-field channel models for XL-MIMO. Given the distinct
electromagnetic properties of near-field communications, we present a range of
channel models to demonstrate the benefits of XL-MIMO. We further motivate and
discuss low-complexity signal processing schemes to promote the practical
implementation of XL-MIMO. Furthermore, we explore the interplay between
XL-MIMO and other emergent 6G technologies. Finally, we outline several
compelling research directions for future XL-MIMO wireless communication
systems.Comment: 38 pages, 10 figure
6G wireless communications networks: a comprehensive survey
The commercial fifth-generation (5G) wireless communications networks have already been deployed with the aim of providing high data rates. However, the rapid growth in the number of smart devices and the emergence of the Internet of Everything (IoE) applications, which require an ultra-reliable and low-latency communication, will result in a substantial burden on the 5G wireless networks. As such, the data rate that could be supplied by 5G networks will unlikely sustain the enormous ongoing data traffic explosion. This has motivated research into continuing to advance the existing wireless networks toward the future generation of cellular systems, known as sixth generation (6G). Therefore, it is essential to provide a prospective vision of the 6G and the key enabling technologies for realizing future networks. To this end, this paper presents a comprehensive review/survey of the future evolution of 6G networks. Specifically, the objective of the paper is to provide a comprehensive review/survey about the key enabling technologies for 6G networks, which include a discussion about the main operation principles of each technology, envisioned potential applications, current state-of-the-art research, and the related technical challenges. Overall, this paper provides useful information for industries and academic researchers and discusses the potentials for opening up new research directions
Multiuser Random Beamforming in Millimetre-Waves Channels
This thesis aims to show that in mmWaves channels, schemes based on randomly-directional beamforming allow to harness both the spatial multiplexing and multi-user diversity characterizing the broadcast channel by using only limited feedback and a simple transmitter architecture. The number of necessary users with respect to the number of transmitting antennas for optimal performances is investigated as well as the fairness issue, for which the use of NOMA is shown to be advantageous w.r.t. OMA