Intrinsic Hardware Evolution on the Transistor Level

This thesis presents a novel approach to the automated synthesis of analog circuits. Evolutionary algorithms are used in conjunction with a fitness evaluation on a dedicated ASIC that serves as the analog substrate for the newly bred candidate solutions. The advantage of evaluating the candidate circuits directly in hardware is twofold. First, it may speed up the evolutionary algorithms, because hardware tests can usually be performed faster than simulations. Second, the evolved circuits are guaranteed to work on a real piece of silicon. The proposed approach is realized as a hardware evolution system consisting of an IBM compatible general purpose computer that hosts the evolutionary algorithm, an FPGA-based mixed signal test board, and the analog substrate. The latter one is designed as a Field Programmable Transistor Array (FPTA) whose programmable transistor cells can be almost freely connected. The transistor cells can be configured to adopt one out of 75 different channel geometries. The chip was produced in a 0.6µm CMOS process and provides ample means for the input and output of analog signals. The configuration is stored in SRAM cells embedded in the programmable transistor cells. The hardware evolution system is used for numerous evolution experiments targeted at a wide variety of different circuit functionalities. These comprise logic gates, Gaussian function circuits, D/A converters, low- and highpass filters, tone discriminators, and comparators. The experimental results are thoroughly analyzed and discussed with respect to related work

Evolution of Transistor Circuits

Der Entwurf von analogen Schaltungen ist ein Bereich der Elektronikentwicklung, der dem Entwickler ein hohes Maß an Wissen und Kreativität beim Lösen von Problemen abverlangt. Bis heute gibt es nur rudimentäre analytische Lösungen um die Bauteile von Schaltungen zu dimensionieren. Motiviert durch diese Herausforderungen, konzentriert sich diese Arbeit auf die automatische Synthese analoger Schaltungen mit Hilfe von Evolutionären Algorithmen. Als analoges Substrat wird ein FPTA benutzt, das ein Feld von konfigurierbaren Transistoren zur Verfügung stellt. Der Einsatz von echter Hardware bietet zwei Vorteile: erstens können entstehende Schaltungen schneller getestet werden als mit einem Simulator und zweitens funktionieren die gefundenen Schaltungen garantiert auf einem echten Chip. Softwareseitig eignen sich Evolutionäre Algorithmen besonders gut für die Synthese analoger Schaltungen, da sie keinerlei Vorwissen über das Optimierungsproblem benötigen. In dieser Arbeit werden neue genetische Operatoren entwickelt, die das Verständnis von auf dem FPTA evolutionierten Schaltungen erleichtern und außerdem Lösungen finden sollen, die auch außerhalb des Substrates funktionieren. Dies ist mit der Hoffnung verbunden, möglicherweise neue und ungewöhnliche Schaltungsprinzipien zu entdecken. Weiterhin wird ein mehrzieliger Optimierungsalgorithmus implementiert und verfeinert, um die Vielzahl von Variablen berücksichtigen zu können, die für die gleichzeitige Optimierung von Topologie und Bauteiledimensionierung notwendig sind. Die vorgeschlagenen genetischen Operatoren, sowie die mehrzielige Optimierung werden für die Evolution von logischen Gattern, Komparatoren, Oszillatoren und Operationsverstärkern eingesetzt. Der Ressourcenverbrauch der durch Evolution gefundenen Schaltungen wird damit vermindert und es ist möglich in einigen Fällen einen übersichtlichen Schaltplan zu erstellen. Ein modulares System für die Evolution von Schaltungen auf konfigurierbaren Substraten wurde entwickelt. Es wird gezeigt, dass mit diesem System FPTA-Architekturen modelliert und direkt für Evolutionsexperimente verwendet werden können

Evolving circuits on a field programmable analog array using genetic programming

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2005.Includes bibliographical references (p. 57-60).This thesis describes the design and implementation of the Genetic Programming Intrinsic Circuit (GPIC) design system. Inspired by a number of recent advances in the field of Evolvable Hardware, the intended purpose of GPIC is to automate the design of analog circuits with minimal domain knowledge, computational resources, and cost using Genetic Programming with candidate solutions implemented in real hardware. This system has been constructed out of commercially available hardware and software, and the components were integrated through the development of a modular device-independent software system. The fitness evaluations of the candidate solutions of the Genetic Programming module are realized through a C interface to a National Instruments Data Acquisition Card. This Genetic Programming approach to analog circuit design decreases the fitness evaluation time of previous approaches by substituting expensive circuit simulation for real-time hardware testing. Since performing fitness evaluations in simulation is limited by the known model for a given environment, intrinsic testing provides additional benefit through the inherent incorporation of any unknown environmental conditions during tests. This feature is especially important for autonomous systems in unknown environments, and systems that must perform well in extreme environments.by Michael A. Terry.M.Eng

Fighting stochastic variability in a D-type flip-flop with transistor-level reconfiguration

In this study, the authors present a design optimisation case study of D-type flip-flop timing characteristics that are degraded as a result of intrinsic stochastic variability in a 25 nm technology process. What makes this work unique is that the design is mapped onto a multi-reconfigurable architecture, which is, like a field programmable gate array (FPGA), configurable at the gate level but can then be optimised using transistor level configuration options that are additionally built into the architecture. While a hardware VLSI prototype of this architecture is currently being fabricated, the results presented here are obtained from a virtual prototype implemented in SPICE using statistically enhanced 25 nm high performance metal gate MOSFET compact models from gold standard simulations for pre-fabrication verification. A D-type flip-flop is chosen as a benchmark in this study, and it is shown that timing characteristics that are degraded because of stochastic variability can be recovered and improved. This study highlights significant potential of the programmable analogue and digital array architecture to represent a next-generation FPGA architecture that can recover yield using post-fabrication transistor-level optimisation in addition to adjusting the operating point of mapped designs

Generalized disjunction decomposition for evolvable hardware

Evolvable hardware (EHW) refers to self-reconfiguration hardware design, where the configuration is under the control of an evolutionary algorithm (EA). One of the main difficulties in using EHW to solve real-world problems is scalability, which limits the size of the circuit that may be evolved. This paper outlines a new type of decomposition strategy for EHW, the “generalized disjunction decomposition” (GDD), which allows the evolution of large circuits. The proposed method has been extensively tested, not only with multipliers and parity bit problems traditionally used in the EHW community, but also with logic circuits taken from the Microelectronics Center of North Carolina (MCNC) benchmark library and randomly generated circuits. In order to achieve statistically relevant results, each analyzed logic circuit has been evolved 100 times, and the average of these results is presented and compared with other EHW techniques. This approach is necessary because of the probabilistic nature of EA; the same logic circuit may not be solved in the same way if tested several times. The proposed method has been examined in an extrinsic EHW system using the$(1 + lambda)$evolution strategy. The results obtained demonstrate that GDD significantly improves the evolution of logic circuits in terms of the number of generations, reduces computational time as it is able to reduce the required time for a single iteration of the EA, and enables the evolution of larger circuits never before evolved. In addition to the proposed method, a short overview of EHW systems together with the most recent applications in electrical circuit design is provided

Reconfigurable Architectures and Systems for IoT Applications

abstract: Internet of Things (IoT) has become a popular topic in industry over the recent years, which describes an ecosystem of internet-connected devices or things that enrich the everyday life by improving our productivity and efficiency. The primary components of the IoT ecosystem are hardware, software and services. While the software and services of IoT system focus on data collection and processing to make decisions, the underlying hardware is responsible for sensing the information, preprocess and transmit it to the servers. Since the IoT ecosystem is still in infancy, there is a great need for rapid prototyping platforms that would help accelerate the hardware design process. However, depending on the target IoT application, different sensors are required to sense the signals such as heart-rate, temperature, pressure, acceleration, etc., and there is a great need for reconfigurable platforms that can prototype different sensor interfacing circuits. This thesis primarily focuses on two important hardware aspects of an IoT system: (a) an FPAA based reconfigurable sensing front-end system and (b) an FPGA based reconfigurable processing system. To enable reconfiguration capability for any sensor type, Programmable ANalog Device Array (PANDA), a transistor-level analog reconfigurable platform is proposed. CAD tools required for implementation of front-end circuits on the platform are also developed. To demonstrate the capability of the platform on silicon, a small-scale array of 24×25 PANDA cells is fabricated in 65nm technology. Several analog circuit building blocks including amplifiers, bias circuits and filters are prototyped on the platform, which demonstrates the effectiveness of the platform for rapid prototyping IoT sensor interfaces. IoT systems typically use machine learning algorithms that run on the servers to process the data in order to make decisions. Recently, embedded processors are being used to preprocess the data at the energy-constrained sensor node or at IoT gateway, which saves considerable energy for transmission and bandwidth. Using conventional CPU based systems for implementing the machine learning algorithms is not energy-efficient. Hence an FPGA based hardware accelerator is proposed and an optimization methodology is developed to maximize throughput of any convolutional neural network (CNN) based machine learning algorithm on a resource-constrained FPGA.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Variability-Aware Circuit Performance Optimisation Through Digital Reconfiguration

This thesis proposes optimisation methods for improving the performance of circuits imple- mented on a custom reconfigurable hardware platform with knowledge of intrinsic variations, through the use of digital reconfiguration. With the continuing trend of transistor shrinking, stochastic variations become first order effects, posing a significant challenge for device reliability. Traditional device models tend to be too conservative, as the margins are greatly increased to account for these variations. Variation-aware optimisation methods are then required to reduce the performance spread caused by these substrate variations. The Programmable Analogue and Digital Array (PAnDA) is a reconfigurable hardware plat- form which combines the traditional architecture of a Field Programmable Gate Array (FPGA) with the concept of configurable transistor widths, and is used in this thesis as a platform on which variability-aware circuits can be implemented. A model of the PAnDA architecture is designed to allow for rapid prototyping of devices, making the study of the effects of intrinsic variability on circuit performance – which re- quires expensive statistical simulations – feasible. This is achieved by means of importing statistically-enhanced transistor performance data from RandomSPICE simulations into a model of the PAnDA architecture implemented in hardware. Digital reconfiguration is then used to explore the hardware resources available for performance optimisation. A bio-inspired optimisation algorithm is used to explore the large solution space more efficiently. Results from test circuits suggest that variation-aware optimisation can provide a significant reduction in the spread of the distribution of performance across various instances of circuits, as well as an increase in performance for each. Even if transistor geometry flexibility is not available, as is the case of traditional architectures, it is still possible to make use of the substrate variations to reduce spread and increase performance by means of function relocation

Hierarchical Strategies for Fault-Tolerance in Reconfigurable Architectures

This thesis presents a novel hierarchical fault-tolerance methodology for fault recovery in reconfigurable devices. As the semiconductor industry moves to producing ever smaller transistors, the number of faults occurring increases. At current technology nodes, unavoidable variations in production cause transistor devices to perform outside of ideal ranges. This variability manifests as faults at higher levels and has a knock-on effect for yields. In some ways, fault tolerance has never been more important. To better explore the area of variability, a novel reconfigurable architecture was designed: Programmable Analogue and Digital Array (PAnDA). By allowing reconfiguration from the transistor level to the logic block level, PAnDA allows for design space exploration, previously only available through simulation, in hardware. The main advantage of this is that design modifications can be tested almost instantaneously, as opposed to running time consuming transistor-level simulations. As a result of this design, each level of PAnDA’s configuration contains structural homogeneity, allowing multiple implementations of the same circuit on the same hardware. This potentially creates opportunities for fault tolerance through reconfiguration, and so experimental work is performed to discover how best to utilise these properties of PAnDA. The findings show that it is possible to optimise the reconfiguration in the event of a fault, even if the nature and location of the fault are unknown