Metamaterial Inspired Azimuth Pattern-Reconfigurable Antenna for 5G Applications

A Radiation reconfigurable antenna is presented for n78 band 5G applications. A planar monopole is combined by a tuning fork and a U shaped strip to form radiating element. A partial ground is maintained at back side. Four metamaterial unit cells are used in this design, two at each side of the radiator to achieve the radiation re-configurability. Comb shaped metamaterial unit cells are placed in a clock wise direction around the antenna and connected to radiator via BAR-64-02V PIN diodes. The proposed reconfigurable antenna operates at 3500MHz for almost all switching conditions. On the basis of the condition of switching diode the antenna radiation pattern is mainly reconfigured into 45o and 135o directions. The antenna’s overall dimensions in X×Y×Z directions are 30mm×26mm×1.57mm. The designed antenna achieved different pattern combinations when diode switching conditions are applied, making it suitable for n78 band 5G applications

Frequency reconfigurable patch antenna for 4G LTE applications

A compact printed multi-band frequency reconfigurable patch antenna for 4G LTE applications is presented in this paper (50 x 60 x 1.6 mm3). The antenna consists of W-shaped and Inverted-U shaped patch lines connected in a Tree-shape on the front side of the antenna. The back-side of the antenna contains a 90°-tilted T-shaped strip connected with an Inverted-L shaped strip which is shorted with a patch on the front side for increasing the electrical length to cover lower frequency bands. Frequency reconfigurability is achieved by inserting three switches i.e., PIN diodes. The most critical part of this work is the designing of RLC-based DC line circuits for providing the DC biasing to the PIN diodes used as switches and inserting them at optimum locations. This antenna is reconfigurable among eight different 4G LTE frequency bands including 0.9 GHz, 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.7 GHz, 1.8 GHz, 2.6 GHz, 3.5 GHz and WLAN band 2.5 GHz. The antenna exhibits different radiation patterns having a different direction of peak gain at different frequencies and for different switching combinations. The antenna is simulated with CST, and a prototype is fabricated to compare the measured and simulated results with good accuracy

Design of Frequency Reconfigurable Multiband Compact Antenna using two PIN diodes for WLAN/WiMAX Applications

YesIn this paper, we present a simple reconfigurable multiband antenna with two PIN diode switches for WiMAX/WLAN applications. The antenna permits reconfigurable switching in up to ten frequency bands between 2.2 GHz and 6 GHz, with relative impedance bandwidths of around 2.5% and 8%. The proposed antenna has been simulated using CST microwave studio software and fabricated on an FR-4 substrate. It is compact, with an area of 50 × 45 mm2, and has a slotted ground substrate. Both measured and simulated return loss characteristics of the optimized antenna show that it satisfies the requirement of 2.4/5.8 GHz WLAN and 3.5 GHz WiMAX antenna applications. Moreover, there is good agreement between the measured and simulated result in terms of radiation pattern and gain.Engineering and Physical Science Research Council through Grant EP/E022936A

Enhancement of Antenna Array Performance Using Reconfigurable Slot-Ring Antennas and Integrated Filter/Antennas

As modern communication system technology develops, the demand for devices with smaller size, higher efficiency, and more functionality has increased dramatically. In addition, highly integrated RF-front-end modules with a reduced footprint and less transition loss between cascaded devices are desirable in most advanced wireless communication systems. Antenna arrays are widely used in wireless communication systems due to their high directivity and beam steering capability. Moreover, antenna arrays are preferred in mobile communication systems for diversity reception to reduce signal fading effects. In order to meet the various requirements of rapidly developing wireless communication systems, low cost, compact, multifunctional integrated antenna arrays are in high demand. Reconfigurable antennas that can flexibly adapt to different applications by dynamically changing their frequency and radiation properties have attracted a lot of attention. Frequency, radiation pattern, polarization, or a combination of two or more of these parameters in the reconfiguration of antennas was studied and presented in recent years. A single reconfigurable antenna is able to replace multiple traditional antennas and accomplish different tasks. Thus, the complexity of wireless communication systems can be greatly reduced with a smaller device size. On the other hand, the integration of antennas with other devices in wireless communication systems that can improve the efficiency and shrink the device size is a growing trend in antenna technology. Compact and highly efficient integrated filters and antennas were studied previously; the studies show that by seamlessly co-designing filters with patch antennas, the fractional bandwidth (FBW) of the antennas can be enhanced as compared to stand-alone antennas. However, the advantages of both the reconfigurable antenna and integrated filter/antenna technology have not been fully applied to antenna array applications. Therefore, this dissertation explores how to maximize the antenna array performance using reconfigurable antennas and integrated filter/antennas. A continuously frequency reconfigurable slot-ring antenna/array with switches and varactors is presented first. By changing the state of the loaded switches, the reconfigurable slot-ring antenna/array is able to operate as an L-band slot-ring antenna or a 2x2 S-band slot-ring antenna array. In each frequency band, the operation frequency of the antenna/array can be continuously tuned with the loaded varactors. To further enhance the functionality of the reconfigurable slot-ring antenna array, a dual-polarized fractal-shaped reconfigurable slot-ring antenna/array is developed with a reduced number of switches and an increased FBW. Additionally, ground plane solutions are explored to achieve single-sided radiation. The benefits of filter/antenna integration are also investigated in both linearly polarized patch phased arrays and circularly polarized patch antenna arrays. Finally, a preliminary study of a tunable integrated evanescent mode filter/antenna is conducted to validate the concept of combining reconfigurable antennas and integrated filter/antennas

The Study of Reconfigurable Antennas and Associated Circuitry

This research focuses on the design of pattern reconfigurable antennas and the associated circuitry. The proposed pattern reconfigurable antenna designs benefit from advantages such as maximum pattern diversity and optimum switching circuits to realise 5G reconfigurable antennas. Whereas MIMO based solutions can provide increased channel capacity, they demand high computational capability and power consumption due to multiple channel processing. This prevents their use in many applications most notably in the Internet of Things where power consumption is of key importance. A switched-beam diversity allows an energy-efficient solution improving the link budget even for small low-cost battery operated IoT/sensor network applications. The main focus of the antenna reconfiguration in this work is for switched-beam diversity. The fundamental switching elements are discussed including basic PIN diode circuits. Techniques to switch the antenna element in the feed or shorting the antenna element to the ground plane are presented. A back-to-back microstrip patch antenna with two hemispherical switchable patterns is proposed. The patch elements on a common ground plane, are switched with a single-pole double-throw PIN diode circuit. Switching the feed selects either of two identical oppositely oriented radiation patterns for maximum diversity in one plane. The identical design of the antenna elements provides similar performance control of frequency and radiation pattern in different states. This antenna provides a simple solution to cross-layer PIN diode circuit designs. A mirrored structure study provides an understanding of performance control for different switching states. A printed inverted-F antenna is presented for monopole reconfigurable antenna design. The proposed low-profile antenna consists of one main radiator and one parasitic element. By shorting the parasitic element to the ground plane using only one PIN diode, the antenna is capable of switching both the pattern and polarisation across the full bandwidth. The switched orthogonal pattern provides the maximum spatial pattern diversity and is realised using a simple structure. Then, a dual-stub coplanar Vivaldi antenna with a parasitic element is presented for the 5G mm-Wave band. The use of a dual-stub coupled between the parasitic element and two tapered slots is researched. The parasitic element shape and size is optimised to increase the realised gain. A bandpass coupled line filter is used for frequency selective features. The use of slits on the outer edge of the ground plane provides a greater maximum gain. This integrated filtenna offers lower insertion loss than the commercial DC blocks. The UWB antenna with an integrated filter can be used for harmonic suppression. The influence of the integrated filter circuit close to the antenna geometry informs the design of PIN diode circuit switching and power supply in the 5G band. Based on the filter design in the mm-Wave band, a method of designing a feasible DC power supply for the PIN diode in the mm-Wave band is studied. A printed Yagi-Uda antenna array is integrated with switching circuitry to realise a switched 180° hemispheres radiation pattern. The antenna realises a maximum diversity in one plane. The study offers the possibility to use PIN diodes in the mm-Wave band for reconfigurable antenna designs. For the presented antennas, key geometric parameters are discussed for improved understanding of the trade-offs in radiation pattern/beamwidth and gain control for reconfigurable antenna applications

Reconfigurable dual band microstrip patch antenna for software defined radio applications

In this paper, a reconfigurable microstrip patch antenna with RF pin diode switches is implemented for dual band of 2.4 GHz and 5.6 GHz Software Defined Radio (SDR) applications. For the dual band SDR system, the use of a single antenna with a wide bandwidth to cover both of the bands can be limiting for low power level signal applications due to wideband noise. A reconfigurable nested microstrip patch antenna is designed on a Rogers 5880 RT/DUROID substrate which is fed by a coaxial probe from the back side of the grounded substrate. RF switching circuitry involves four RF pin diodes at each side of the inner patch. The dual bands of 2.4 GHz and 5.6 GHz frequency operation can be simply obtained by switching the PIN diodes on and off. The antenna is well matched and achieves approximately 7 dBi simulated gain at both frequency bands. Simulation results show that the nested patch antenna is suitable for dual band SDR applications

Reconfigurable Monopole Antennas With Circular Polarization

This thesis presents research on printed circularly-polarized monopole antennas and their application in reconfigurable monopole antennas. The proposed circularly-polarised monopole antennas benefit from advantages such as small size, low-cost, low-profile and simple designs. The first part of this thesis introduces three printed circularly-polarized monopole antennas for global navigation satellite systems and Wi-Fi applications. The primary focus is on the ground plane which is used as a radiating component in realizing circular-polarization. It is shown that by employing the ground plane as a radiator results in a wide axial ratio bandwidth. The radiation patterns of the antennas and their relationship with antenna ground plane sizes is investigated. Then, a frequency-reconfigurable monopole antenna with circular-polarization for wireless local area networks and global navigation satellite systems is presented. The ground plane current distribution, rearranged by a switch, enables the right-hand circularly-polarized band to move in frequency from the GPS band to Wi-Fi frequency bands. Finally, a simple polarization reconfigurable printed monopole antenna for wireless applications is described. Once again, with the help of the ground plane and by changing its current distribution, linear-polarization, right-hand or left-hand circular-polarization is realized. The polarization agility is controlled by two PIN diodes, which alter the ground plane surface currents. The antenna is one of the few polarization-reconfigurable monopole antennas reported in the literature. For all the presented antennas, parametric studies of key geometric parameters are given for clear understanding of the circular-polarization radiation mechanism

Compact printed multiband antenna with independent setting suitable for fixed and reconfigurable wireless communication systems

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This paper presents the design of a low-profile compact printed antenna for fixed frequency and reconfigurable frequency bands. The antenna consists of a main patch, four sub-patches, and a ground plane to generate five frequency bands, at 0.92, 1.73, 1.98, 2.4, and 2.9 GHz, for different wireless systems. For the fixed-frequency design, the five individual frequency bands can be adjusted and set independently over the wide ranges of 18.78%, 22.75%, 4.51%, 11%, and 8.21%, respectively, using just one parameter of the antenna. By putting a varactor (diode) at each of the sub-patch inputs, four of the frequency bands can be controlled independently over wide ranges and the antenna has a reconfigurable design. The tunability ranges for the four bands of 0.92, 1.73, 1.98, and 2.9 GHz are 23.5%, 10.30%, 13.5%, and 3%, respectively. The fixed and reconfigurable designs are studied using computer simulation. For verification of simulation results, the two designs are fabricated and the prototypes are measured. The results show a good agreement between simulated and measured results

Wide to multiband elliptical monopole reconfigurable antenna for multimode systems applications

Wideband-multiband reconfigurable elliptical monopole antenna is investigated in this paper. By having conventional elliptical monopole antenna, wideband operating frequency is obtained. With the combination of dual pairs of slotted arms and a band-pass filter on the ground plane of the elliptical monopole, multiband is achieved. Dual-band operating frequencies at 1.6 GHz and 2.6 GHz while wideband operates from 3.35 GHz to 9 GHz. Therefore, wide range of wireless communication systems is obtained from the proposed antenna to support the multiband mode (i.e. GPS and LTE) and UWB systems. Frequency reconfigurable is achieved by controlling the switches integrated on the antenna structure. Simulated results of reflection coefficient, radiation patterns and gain performance are presented. The proposed antenna design is suitable candidate for different wireless communication applications

A Simple Polarization Reconfigurable Printed Monopole Antenna

A simple polarization reconfigurable printed monopole antenna is proposed for wireless applications. Conducting strips are used to connect to the ground plane providing the necessary additional modes for circular-polarization. Linear-polarization, right hand or left hand circular-polarization can be realized using only two PIN diodes, which connect to the ground plane, minimizing their effect on radiation characteristics. The mechanism is described, and key antenna parameters are studied and optimized. The antenna is prototyped and tested for all polarization configurations