891 research outputs found
Hardware Impairments in Large-scale MISO Systems: Energy Efficiency, Estimation, and Capacity Limits
The use of large-scale antenna arrays has the potential to bring substantial
improvements in energy efficiency and/or spectral efficiency to future wireless
systems, due to the greatly improved spatial beamforming resolution. Recent
asymptotic results show that by increasing the number of antennas one can
achieve a large array gain and at the same time naturally decorrelate the user
channels; thus, the available energy can be focused very accurately at the
intended destinations without causing much inter-user interference. Since these
results rely on asymptotics, it is important to investigate whether the
conventional system models are still reasonable in the asymptotic regimes. This
paper analyzes the fundamental limits of large-scale multiple-input
single-output (MISO) communication systems using a generalized system model
that accounts for transceiver hardware impairments. As opposed to the case of
ideal hardware, we show that these practical impairments create finite ceilings
on the estimation accuracy and capacity of large-scale MISO systems.
Surprisingly, the performance is only limited by the hardware at the
single-antenna user terminal, while the impact of impairments at the
large-scale array vanishes asymptotically. Furthermore, we show that an
arbitrarily high energy efficiency can be achieved by reducing the power while
increasing the number of antennas.Comment: Published at International Conference on Digital Signal Processing
(DSP 2013), 6 pages, 5 figure
Towards a Realistic Assessment of Multiple Antenna HCNs: Residual Additive Transceiver Hardware Impairments and Channel Aging
Given the critical dependence of broadcast channels by the accuracy of
channel state information at the transmitter (CSIT), we develop a general
downlink model with zero-forcing (ZF) precoding, applied in realistic
heterogeneous cellular systems with multiple antenna base stations (BSs).
Specifically, we take into consideration imperfect CSIT due to pilot
contamination, channel aging due to users relative movement, and unavoidable
residual additive transceiver hardware impairments (RATHIs). Assuming that the
BSs are Poisson distributed, the main contributions focus on the derivations of
the upper bound of the coverage probability and the achievable user rate for
this general model. We show that both the coverage probability and the user
rate are dependent on the imperfect CSIT and RATHIs. More concretely, we
quantify the resultant performance loss of the network due to these effects. We
depict that the uplink RATHIs have equal impact, but the downlink transmit BS
distortion has a greater impact than the receive hardware impairment of the
user. Thus, the transmit BS hardware should be of better quality than user's
receive hardware. Furthermore, we characterise both the coverage probability
and user rate in terms of the time variation of the channel. It is shown that
both of them decrease with increasing user mobility, but after a specific value
of the normalised Doppler shift, they increase again. Actually, the time
variation, following the Jakes autocorrelation function, mirrors this effect on
coverage probability and user rate. Finally, we consider space division
multiple access (SDMA), single user beamforming (SU-BF), and baseline
single-input single-output (SISO) transmission. A comparison among these
schemes reveals that the coverage by means of SU-BF outperforms SDMA in terms
of coverage.Comment: accepted in IEEE TV
Impact of Residual Transmit RF Impairments on Training-Based MIMO Systems
Radio-frequency (RF) impairments, that exist intimately in wireless
communications systems, can severely degrade the performance of traditional
multiple-input multiple-output (MIMO) systems. Although compensation schemes
can cancel out part of these RF impairments, there still remains a certain
amount of impairments. These residual impairments have fundamental impact on
the MIMO system performance. However, most of the previous works have neglected
this factor. In this paper, a training-based MIMO system with residual transmit
RF impairments (RTRI) is considered. In particular, we derive a new channel
estimator for the proposed model, and find that RTRI can create an irreducible
estimation error floor. Moreover, we show that, in the presence of RTRI, the
optimal training sequence length can be larger than the number of transmit
antennas, especially in the low and high signal-to-noise ratio (SNR) regimes.
An increase in the proposed approximated achievable rate is also observed by
adopting the optimal training sequence length. When the training and data
symbol powers are required to be equal, we demonstrate that, at high SNRs,
systems with RTRI demand more training, whereas at low SNRs, such demands are
nearly the same for all practical levels of RTRI.Comment: Accepted for publication at the IEEE International Conference on
Communications (ICC 2014), 6 pages, 5 figure
Optimal Power Allocation by Imperfect Hardware Analysis in Untrusted Relaying Networks
By taking a variety of realistic hardware imperfections into consideration,
we propose an optimal power allocation (OPA) strategy to maximize the
instantaneous secrecy rate of a cooperative wireless network comprised of a
source, a destination and an untrusted amplify-and-forward (AF) relay. We
assume that either the source or the destination is equipped with a large-scale
multiple antennas (LSMA) system, while the rest are equipped with a single
antenna. To prevent the untrusted relay from intercepting the source message,
the destination sends an intended jamming noise to the relay, which is referred
to as destination-based cooperative jamming (DBCJ). Given this system model,
novel closed-form expressions are presented in the high signal-to-noise ratio
(SNR) regime for the ergodic secrecy rate (ESR) and the secrecy outage
probability (SOP). We further improve the secrecy performance of the system by
optimizing the associated hardware design. The results reveal that by
beneficially distributing the tolerable hardware imperfections across the
transmission and reception radio-frequency (RF) front ends of each node, the
system's secrecy rate may be improved. The engineering insight is that equally
sharing the total imperfections at the relay between the transmitter and the
receiver provides the best secrecy performance. Numerical results illustrate
that the proposed OPA together with the most appropriate hardware design
significantly increases the secrecy rate.Comment: 29 pages, 7 figures, Submitted to IEEE Transactions on Wireless
Communication
Performance Analysis of Cell-Free Massive MIMO Systems: A Stochastic Geometry Approach
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Cell-free (CF) massive multiple-input-multiple-output (MIMO) has emerged as an alternative deployment for conventional cellular massive MIMO networks. As revealed by its name, this topology considers no cells, while a large number of multi-antenna access points (APs) serves simultaneously a smaller number of users over the same time/frequency resources through time-division duplex (TDD) operation. Prior works relied on the strong assumption (quite idealized) that the APs are uniformly distributed, and actually, this randomness was considered during the simulation and not in the analysis. However, in practice, ongoing and future networks become denser and increasingly irregular. Having this in mind, we consider that the AP locations are modeled by means of a Poisson point process (PPP) which is a more realistic model for the spatial randomness than a grid or uniform deployment. In particular, by virtue of stochastic geometry tools, we derive both the downlink coverage probability and achievable rate. Notably, this is the only work providing the coverage probability and shedding light on this aspect of CF massive MIMO systems. Focusing on the extraction of interesting insights, we consider small-cells (SCs) as a benchmark for comparison. Among the findings, CF massive MIMO systems achieve both higher coverage and rate with comparison to SCs due to the properties of favorable propagation, channel hardening, and interference suppression. Especially, we showed for both architectures that increasing the AP density results in a higher coverage which saturates after a certain value and increasing the number of users decreases the achievable rate but CF massive MIMO systems take advantage of the aforementioned properties, and thus, outperform SCs. In general, the performance gap between CF massive MIMO systems and SCs is enhanced by increasing the AP density. Another interesting observation concerns that a higher path-loss exponent decreases the rate while the users closer to the APs affect more the performance in terms of the rate.Peer reviewe
Adaptive Nonlinear RF Cancellation for Improved Isolation in Simultaneous Transmit-Receive Systems
This paper proposes an active radio frequency (RF) cancellation solution to
suppress the transmitter (TX) passband leakage signal in radio transceivers
supporting simultaneous transmission and reception. The proposed technique is
based on creating an opposite-phase baseband equivalent replica of the TX
leakage signal in the transceiver digital front-end through adaptive nonlinear
filtering of the known transmit data, to facilitate highly accurate
cancellation under a nonlinear TX power amplifier (PA). The active RF
cancellation is then accomplished by employing an auxiliary transmitter chain,
to generate the actual RF cancellation signal, and combining it with the
received signal at the receiver (RX) low noise amplifier (LNA) input. A
closed-loop parameter learning approach, based on the decorrelation principle,
is also developed to efficiently estimate the coefficients of the nonlinear
cancellation filter in the presence of a nonlinear TX PA with memory, finite
passive isolation, and a nonlinear RX LNA. The performance of the proposed
cancellation technique is evaluated through comprehensive RF measurements
adopting commercial LTE-Advanced transceiver hardware components. The results
show that the proposed technique can provide an additional suppression of up to
54 dB for the TX passband leakage signal at the RX LNA input, even at
considerably high transmit power levels and with wide transmission bandwidths.
Such novel cancellation solution can therefore substantially improve the TX-RX
isolation, hence reducing the requirements on passive isolation and RF
component linearity, as well as increasing the efficiency and flexibility of
the RF spectrum use in the emerging 5G radio networks.Comment: accepted to IEE
- …