Joint source-channel coding/decoding of 3D-ESCOT bitstreams

International audienceJoint source-channel decoding (JSCD) exploits residual redundancy in compressed bitstreams to improve the robustness to transmission errors of multimedia coding schemes. This paper proposes an architecture to introduce some additional side information in compressed streams to help JSCD. This architecture exploits a reference decoder already present or introduced at the encoder side. An application to the robust decoding of 3D-ESCOT encoded bitstreams generated within the Vidwav video coder is presented. The layered bitstream generated by this encoder allows SNR scalability, and moreover, when processed by a JSCD, provides increased robustness to transmission errors compared with a single layered bitstream

Optimal Error Protection of Progressively Compressed 3D Meshes

Given a number of available layers of source data and a transmission bit budget, we propose an algorithm that determines how many layers should be sent and how many protection bits should be allocated to each transmitted layer such that the expected distortion at the receiver is minimum. The algorithm is used for robust transmission of progressively compressed 3D models over a packet erasure channel. In contrast to the previous approach, which uses exhaustive search, the time complexity of our algorithm is linear in the transmission bit budget

Real-time transmission of panoramic images for a telepresence wheelchair

© 2015 IEEE. This paper proposes an approach to transmit panoramic images in real-time for a telepresence wheelchair. The system can provide remote monitoring and assistive assistance for people with disabilities. This study exploits technological advancement in image processing, wireless communication networks, and healthcare systems. High resolution panoramic images are extracted from the camera which is mounted on the wheelchair. The panoramic images are streamed in real-time via a wireless network. The experimental results show that streaming speed is up to 250 KBps. The subjective quality assessments show that the received images are smooth during the streaming period. In addition, in terms of the objective image quality evaluation the average peak signal-to-noise ratio of the reconstructed images is measured to be 39.19 dB which reveals high quality of images

Optimal packet loss protection of progressively compressed 3D meshes

©20009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.We consider a state of the art system that uses layered source coding and forward error correction with Reed- Solomon codes to efficiently transmit 3D meshes over lossy packet networks. Given a transmission bit budget, the performance of this system can be optimized by determining how many layers should be sent, how each layer should be packetized, and how many parity bits should be allocated to each layer such that the expected distortion at the receiver is minimum. The previous solution for this optimization problem uses exhaustive search, which is not feasible when the transmission bit budget is large.We propose instead an exact algorithm that solves this optimization problem in linear time and space. We illustrate the advantages of our approach by providing experimental results for the CPM (Compressed Progressive Meshes) mesh compression techniqueDFG Research Training Group GK-1042

Optimized Transmission of JPEG2000 Streams Over Wireless Channels

The transmission of JPEG2000 images over wireless channels is examined using reorganization of the compressed images into error-resilient, product-coded streams. The product-code consists of Turbo-codes and Reed-Solomon codes which are optimized using an iterative process. The generation of the stream to be transmitted is performed directly using compressed JPEG2000 streams. The resulting scheme is tested for the transmission of compressed JPEG2000 images over wireless channels and is shown to outperform other algorithms which were recently proposed for the wireless transmission of images

Combined Source and Channel Strategies for Optimized Video Communications

ISBN 978-953-7619-70-

Research and developments of Dirac video codec

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video data over the bandwidth limited erroneous channels is another important issue. To enable a video codec for broadcasting application, it is required to implement the corresponding coding tools (e.g. error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and hence their specifications are not defined in the standard. In Dirac as well, the original codec is optimized for storage purpose only and so, several non-normative part of the encoding tools are still required in order to be able to use in other types of application. Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient coding method used here is a simple and low complex coding scheme which provides the error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet erasure wired network. The scheme combines source and channel coding approach where error-resilient source coding is achieved by data partitioning in the wavelet transformed domain and channel coding is achieved through the application of either Rate-Compatible Punctured Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the Internet broadcasting application. But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the 2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the optimum QF of the current encoding frame for a given target bitrate, R. In some applications like video conferencing, real-time encoding and decoding with minimum delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder is the most time consuming stage. So, reducing the complexity of the motion estimation stage will certainly give one step closer to the real-time application. So, as a partial contribution toward realtime application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of motion estimation. The same strategy was implemented in both Dirac and H.264 in order to investigate its performance on different codecs. Together with this fast ME strategy, a method which is called partial cost function calculation in order to further reduce down the computational load of the cost function calculation was presented. The calculation is based upon the pre-defined set of patterns which were chosen in such a way that they have as much maximum coverage as possible over the whole block. In summary, this research work has contributed to the error-resilient transmission of compressed bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this, the final phase of the research has partially contributed toward the real-time application of the Dirac video codec by implementing a fast motion estimation strategy together with partial cost function calculation idea.BBC R&D and Brunel University