Brunel University School of Engineering and Design PhD Theses
Abstract
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video
data over the bandwidth limited erroneous channels is another important issue. To enable a video
codec for broadcasting application, it is required to implement the corresponding coding tools (e.g.
error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and
hence their specifications are not defined in the standard. In Dirac as well, the original codec is
optimized for storage purpose only and so, several non-normative part of the encoding tools are still
required in order to be able to use in other types of application.
Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of
the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient
coding method used here is a simple and low complex coding scheme which provides the
error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet
erasure wired network. The scheme combines source and channel coding approach where error-resilient
source coding is achieved by data partitioning in the wavelet transformed domain and
channel coding is achieved through the application of either Rate-Compatible Punctured
Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus
MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the
Internet broadcasting application.
But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from
the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the
2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality
Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to
achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the
bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the
optimum QF of the current encoding frame for a given target bitrate, R.
In some applications like video conferencing, real-time encoding and decoding with minimum
delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the
complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder
is the most time consuming stage. So, reducing the complexity of the motion estimation stage will
certainly give one step closer to the real-time application. So, as a partial contribution toward realtime
application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed
and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of
motion estimation. The same strategy was implemented in both Dirac and H.264 in order to
investigate its performance on different codecs. Together with this fast ME strategy, a method which
is called partial cost function calculation in order to further reduce down the computational load of the
cost function calculation was presented. The calculation is based upon the pre-defined set of patterns
which were chosen in such a way that they have as much maximum coverage as possible over the
whole block.
In summary, this research work has contributed to the error-resilient transmission of compressed
bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this,
the final phase of the research has partially contributed toward the real-time application of the Dirac
video codec by implementing a fast motion estimation strategy together with partial cost function
calculation idea.BBC R&D and Brunel University