2,450 research outputs found

    Efficient feasibility analysis of real-time asynchronous task sets

    Get PDF
    Several schedulability tests for real-time periodic task sets scheduled under the Earliest Deadline First algorithm have been proposed in literature, including analyses for precedence and resource constraints. However, all available tests consider synchronous task sets only, that are task sets in which all tasks are initially activated at the same time. In fact, every necessary and sufficient feasibility condition for asynchronous task sets, also known as task sets with offsets, is proven to be NP-complete in the number of tasks. We propose a new schedulability test for asynchronous task sets that, while being only sufficient, performs extremely better than available tests at the cost of a slight complexity increase. The test is further extended to task sets with resource constraints, and we discuss the importance of task offsets on the problems of feasibility and release jitter. We then show how our methodology can be extended in order to account for precedence constraints and multiprocessor and distributed computation applying holistic response time analysis to a real-time transaction-based model. This analysis is finally applied to asymmetric multiprocessor systems where it is able to achieve a dramatic performance increase over existing schedulability tests

    Schedulability, Response Time Analysis and New Models of P-FRP Systems

    Get PDF
    Functional Reactive Programming (FRP) is a declarative approach for modeling and building reactive systems. FRP has been shown to be an expressive formalism for building applications of computer graphics, computer vision, robotics, etc. Priority-based FRP (P-FRP) is a formalism that allows preemption of executing programs and guarantees real-time response. Since functional programs cannot maintain state and mutable data, changes made by programs that are preempted have to be rolled back. Hence in P-FRP, a higher priority task can preempt the execution of a lower priority task, but the preempted lower priority task will have to restart after the higher priority task has completed execution. This execution paradigm is called Abort-and-Restart (AR). Current real-time research is focused on preemptive of non-preemptive models of execution and several state-of-the-art methods have been developed to analyze the real-time guarantees of these models. Unfortunately, due to its transactional nature where preempted tasks are aborted and have to restart, the execution semantics of P-FRP does not fit into the standard definitions of preemptive or non-preemptive execution, and the research on the standard preemptive and non-preemptive may not applicable for the P-FRP AR model. Out of many research areas that P-FRP may demands, we focus on task scheduling which includes task and system modeling, priority assignment, schedulability analysis, response time analysis, improved P-FRP AR models, algorithms and corresponding software. In this work, we review existing results on P-FRP task scheduling and then present our research contributions: (1) a tighter feasibility test interval regarding the task release offsets as well as a linked list based algorithm and implementation for scheduling simulation; (2) P-FRP with software transactional memory-lazy conflict detection (STM-LCD); (3) a non-work-conserving scheduling model called Deferred Start; (4) a multi-mode P-FRP task model; (5) SimSo-PFRP, the P-FRP extension of SimSo - a SimPy-based, highly extensible and user friendly task generator and task scheduling simulator.Computer Science, Department o

    Dynamic Priority Scheduling of Periodic Tasks with Extended Precedences

    Get PDF
    International audienceThe software architecture of a critical embedded control system generally consists of a set of multi-periodic communicating tasks. In order to be able to describe such a system, we define the notion of \emph{semaphore precedence constraint}, which supports multi-rate communications that follow regular repetitive patterns. We propose a feasibility test for EDF and we study three implementations, for periodic task sets related by such extended precedences on monoprocessor architectures

    Scheduling analysis of fixed priority hard real-time systems with multiframe tasks

    Get PDF
    EThOS - Electronic Theses Online ServiceGBUnited Kingdo

    Recovery Time Considerations in Real-Time Systems Employing Software Fault Tolerance

    Get PDF
    Safety-critical real-time systems like modern automobiles with advanced driving-assist features must employ redundancy for crucial software tasks to tolerate permanent crash faults. This redundancy can be achieved by using techniques like active replication or the primary-backup approach. In such systems, the recovery time which is the amount of time it takes for a redundant task to take over execution on the failure of a primary task becomes a very important design parameter. The recovery time for a given task depends on various factors like task allocation, primary and redundant task priorities, system load and the scheduling policy. Each task can also have a different recovery time requirement (RTR). For example, in automobiles with automated driving features, safety-critical tasks like perception and steering control have strict RTRs, whereas such requirements are more relaxed in the case of tasks like heating control and mission planning. In this paper, we analyze the recovery time for software tasks in a real-time system employing Rate-Monotonic Scheduling (RMS). We derive bounds on the recovery times for different redundant task options and propose techniques to determine the redundant-task type for a task to satisfy its RTR. We also address the fault-tolerant task allocation problem, with the additional constraint of satisfying the RTR of each task in the system. Given that the problem of assigning tasks to processors is a well-known NP-hard bin-packing problem we propose computationally-efficient heuristics to find a feasible allocation of tasks and their redundant copies. We also apply the simulated annealing method to the fault-tolerant task allocation problem with RTR constraints and compare against our heuristics

    Real-Time Sensor Networks and Systems for the Industrial IoT

    Get PDF
    The Industrial Internet of Things (Industrial IoT—IIoT) has emerged as the core construct behind the various cyber-physical systems constituting a principal dimension of the fourth Industrial Revolution. While initially born as the concept behind specific industrial applications of generic IoT technologies, for the optimization of operational efficiency in automation and control, it quickly enabled the achievement of the total convergence of Operational (OT) and Information Technologies (IT). The IIoT has now surpassed the traditional borders of automation and control functions in the process and manufacturing industry, shifting towards a wider domain of functions and industries, embraced under the dominant global initiatives and architectural frameworks of Industry 4.0 (or Industrie 4.0) in Germany, Industrial Internet in the US, Society 5.0 in Japan, and Made-in-China 2025 in China. As real-time embedded systems are quickly achieving ubiquity in everyday life and in industrial environments, and many processes already depend on real-time cyber-physical systems and embedded sensors, the integration of IoT with cognitive computing and real-time data exchange is essential for real-time analytics and realization of digital twins in smart environments and services under the various frameworks’ provisions. In this context, real-time sensor networks and systems for the Industrial IoT encompass multiple technologies and raise significant design, optimization, integration and exploitation challenges. The ten articles in this Special Issue describe advances in real-time sensor networks and systems that are significant enablers of the Industrial IoT paradigm. In the relevant landscape, the domain of wireless networking technologies is centrally positioned, as expected

    Response-Time Analysis of Limited-Preemptive Parallel DAG Tasks Under Global Scheduling

    Get PDF
    Most recurrent real-time applications can be modeled as a set of sequential code segments (or blocks) that must be (repeatedly) executed in a specific order. This paper provides a schedulability analysis for such systems modeled as a set of parallel DAG tasks executed under any limited-preemptive global job-level fixed priority scheduling policy. More precisely, we derive response-time bounds for a set of jobs subject to precedence constraints, release jitter, and execution-time uncertainty, which enables support for a wide variety of parallel, limited-preemptive execution models (e.g., periodic DAG tasks, transactional tasks, generalized multi-frame tasks, etc.). Our analysis explores the space of all possible schedules using a powerful new state abstraction and state-pruning technique. An empirical evaluation shows the analysis to identify between 10 to 90 percentage points more schedulable task sets than the state-of-the-art schedulability test for limited-preemptive sporadic DAG tasks. It scales to systems of up to 64 cores with 20 DAG tasks. Moreover, while our analysis is almost as accurate as the state-of-the-art exact schedulability test based on model checking (for sequential non-preemptive tasks), it is three orders of magnitude faster and hence capable of analyzing task sets with more than 60 tasks on 8 cores in a few seconds
    • …
    corecore