374 research outputs found
Receive Combining vs. Multi-Stream Multiplexing in Downlink Systems with Multi-Antenna Users
In downlink multi-antenna systems with many users, the multiplexing gain is
strictly limited by the number of transmit antennas and the use of these
antennas. Assuming that the total number of receive antennas at the
multi-antenna users is much larger than , the maximal multiplexing gain can
be achieved with many different transmission/reception strategies. For example,
the excess number of receive antennas can be utilized to schedule users with
effective channels that are near-orthogonal, for multi-stream multiplexing to
users with well-conditioned channels, and/or to enable interference-aware
receive combining. In this paper, we try to answer the question if the data
streams should be divided among few users (many streams per user) or many users
(few streams per user, enabling receive combining). Analytic results are
derived to show how user selection, spatial correlation, heterogeneous user
conditions, and imperfect channel acquisition (quantization or estimation
errors) affect the performance when sending the maximal number of streams or
one stream per scheduled user---the two extremes in data stream allocation.
While contradicting observations on this topic have been reported in prior
works, we show that selecting many users and allocating one stream per user
(i.e., exploiting receive combining) is the best candidate under realistic
conditions. This is explained by the provably stronger resilience towards
spatial correlation and the larger benefit from multi-user diversity. This
fundamental result has positive implications for the design of downlink systems
as it reduces the hardware requirements at the user devices and simplifies the
throughput optimization.Comment: Published in IEEE Transactions on Signal Processing, 16 pages, 11
figures. The results can be reproduced using the following Matlab code:
https://github.com/emilbjornson/one-or-multiple-stream
Limited Feedback-based Block Diagonalization for the MIMO Broadcast Channel
Block diagonalization is a linear precoding technique for the multiple
antenna broadcast (downlink) channel that involves transmission of multiple
data streams to each receiver such that no multi-user interference is
experienced at any of the receivers. This low-complexity scheme operates only a
few dB away from capacity but requires very accurate channel knowledge at the
transmitter. We consider a limited feedback system where each receiver knows
its channel perfectly, but the transmitter is only provided with a finite
number of channel feedback bits from each receiver. Using a random quantization
argument, we quantify the throughput loss due to imperfect channel knowledge as
a function of the feedback level. The quality of channel knowledge must improve
proportional to the SNR in order to prevent interference-limitations, and we
show that scaling the number of feedback bits linearly with the system SNR is
sufficient to maintain a bounded rate loss. Finally, we compare our
quantization strategy to an analog feedback scheme and show the superiority of
quantized feedback.Comment: 20 pages, 4 figures, submitted to IEEE JSAC November 200
Linear Transmit-Receive Strategies for Multi-user MIMO Wireless Communications
Die Notwendigkeit zur Unterdrueckung von Interferenzen auf der einen Seite
und zur Ausnutzung der durch Mehrfachzugriffsverfahren erzielbaren Gewinne
auf der anderen Seite rueckte die raeumlichen Mehrfachzugriffsverfahren
(Space Division Multiple Access, SDMA) in den Fokus der Forschung. Ein
Vertreter der raeumlichen Mehrfachzugriffsverfahren, die lineare
Vorkodierung, fand aufgrund steigender Anzahl an Nutzern und Antennen in
heutigen und zukuenftigen Mobilkommunikationssystemen besondere Beachtung,
da diese Verfahren das Design von Algorithmen zur Vorcodierung
vereinfachen. Aus diesem Grund leistet diese Dissertation einen Beitrag zur
Entwicklung linearer Sende- und Empfangstechniken fuer MIMO-Technologie mit
mehreren Nutzern. Zunaechst stellen wir ein Framework zur Approximation des
Datendurchsatzes in Broadcast-MIMO-Kanaelen mit mehreren Nutzern vor. In
diesem Framework nehmen wir das lineare Vorkodierverfahren regularisierte
Blockdiagonalisierung (RBD) an. Durch den Vergleich von Dirty Paper Coding
(DPC) und linearen Vorkodieralgorithmen (z.B. Zero Forcing (ZF) und
Blockdiagonalisierung (BD)) ist es uns moeglich, untere und obere Schranken
fuer den Unterschied bezueglich Datenraten und bezueglich Leistung zwischen
beiden anzugeben. Im Weiteren entwickeln wir einen Algorithmus fuer
koordiniertes Beamforming (Coordinated Beamforming, CBF), dessen Loesung
sich in geschlossener Form angeben laesst. Dieser CBF-Algorithmus basiert
auf der SeDJoCo-Transformation und loest bisher vorhandene Probleme im
Bereich CBF. Im Anschluss schlagen wir einen iterativen CBF-Algorithmus
namens FlexCoBF (flexible coordinated beamforming) fuer
MIMO-Broadcast-Kanaele mit mehreren Nutzern vor. Im Vergleich mit bis dato
existierenden iterativen CBF-Algorithmen kann als vielversprechendster
Vorteil die freie Wahl der linearen Sende- und Empfangsstrategie
herausgestellt werden. Das heisst, jede existierende Methode der linearen
Vorkodierung kann als Sendestrategie genutzt werden, waehrend die Strategie
zum Empfangsbeamforming frei aus MRC oder MMSE gewaehlt werden darf. Im
Hinblick auf Szenarien, in denen Mobilfunkzellen in Clustern
zusammengefasst sind, erweitern wir FlexCoBF noch weiter. Hier wurde das
Konzept der koordinierten Mehrpunktverbindung (Coordinated Multipoint
(CoMP) transmission) integriert. Zuletzt stellen wir drei Moeglichkeiten
vor, Kanalzustandsinformationen (Channel State Information, CSI) unter
verschiedenen Kanalumstaenden zu erlangen. Die Qualitaet der
Kanalzustandsinformationen hat einen starken Einfluss auf die Guete des
Uebertragungssystems. Die durch unsere neuen Algorithmen erzielten
Verbesserungen haben wir mittels numerischer Simulationen von Summenraten
und Bitfehlerraten belegt.In order to combat interference and exploit large multiplexing gains of the
multi-antenna systems, a particular interest in spatial division multiple
access (SDMA) techniques has emerged. Linear precoding techniques, as one
of the SDMA strategies, have obtained more attention due to the fact that
an increasing number of users and antennas involved into the existing and
future mobile communication systems requires a simplification of the
precoding design. Therefore, this thesis contributes to the design of
linear transmit and receive strategies for multi-user MIMO broadcast
channels in a single cell and clustered multiple cells. First, we present a
throughput approximation framework for multi-user MIMO broadcast channels
employing regularized block diagonalization (RBD) linear precoding.
Comparing dirty paper coding (DPC) and linear precoding algorithms (e.g.,
zero forcing (ZF) and block diagonalization (BD)), we further quantify
lower and upper bounds of the rate and power offset between them as a
function of the system parameters such as the number of users and antennas.
Next, we develop a novel closed-form coordinated beamforming (CBF)
algorithm (i.e., SeDJoCo based closed-form CBF) to solve the existing open
problem of CBF. Our new algorithm can support a MIMO system with an
arbitrary number of users and transmit antennas. Moreover, the application
of our new algorithm is not only for CBF, but also for blind source
separation (BSS), since the same mathematical model has been used in BSS
application.Then, we further propose a new iterative CBF algorithm (i.e.,
flexible coordinated beamforming (FlexCoBF)) for multi-user MIMO broadcast
channels. Compared to the existing iterative CBF algorithms, the most
promising advantage of our new algorithm is that it provides freedom in the
choice of the linear transmit and receive beamforming strategies, i.e., any
existing linear precoding method can be chosen as the transmit strategy and
the receive beamforming strategy can be flexibly chosen from MRC or MMSE
receivers. Considering clustered multiple cell scenarios, we extend the
FlexCoBF algorithm further and introduce the concept of the coordinated
multipoint (CoMP) transmission. Finally, we present three strategies for
channel state information (CSI) acquisition regarding various channel
conditions and channel estimation strategies. The CSI knowledge is required
at the base station in order to implement SDMA techniques. The quality of
the obtained CSI heavily affects the system performance. The performance
enhancement achieved by our new strategies has been demonstrated by
numerical simulation results in terms of the system sum rate and the bit
error rate
Antenna Combining for the MIMO Downlink Channel
A multiple antenna downlink channel where limited channel feedback is
available to the transmitter is considered. In a vector downlink channel
(single antenna at each receiver), the transmit antenna array can be used to
transmit separate data streams to multiple receivers only if the transmitter
has very accurate channel knowledge, i.e., if there is high-rate channel
feedback from each receiver. In this work it is shown that channel feedback
requirements can be significantly reduced if each receiver has a small number
of antennas and appropriately combines its antenna outputs. A combining method
that minimizes channel quantization error at each receiver, and thereby
minimizes multi-user interference, is proposed and analyzed. This technique is
shown to outperform traditional techniques such as maximum-ratio combining
because minimization of interference power is more critical than maximization
of signal power in the multiple antenna downlink. Analysis is provided to
quantify the feedback savings, and the technique is seen to work well with user
selection and is also robust to receiver estimation error.Comment: Submitted to IEEE Trans. Wireless Communications April 2007. Revised
August 200
Knowledge Distillation-aided End-to-End Learning for Linear Precoding in Multiuser MIMO Downlink Systems with Finite-Rate Feedback
We propose a deep learning-based channel estimation, quantization, feedback,
and precoding method for downlink multiuser multiple-input and multiple-output
systems. In the proposed system, channel estimation and quantization for
limited feedback are handled by a receiver deep neural network (DNN). Precoder
selection is handled by a transmitter DNN. To emulate the traditional channel
quantization, a binarization layer is adopted at each receiver DNN, and the
binarization layer is also used to enable end-to-end learning. However, this
can lead to inaccurate gradients, which can trap the receiver DNNs at a poor
local minimum during training. To address this, we consider knowledge
distillation, in which the existing DNNs are jointly trained with an auxiliary
transmitter DNN. The use of an auxiliary DNN as a teacher network allows the
receiver DNNs to additionally exploit lossless gradients, which is useful in
avoiding a poor local minimum. For the same number of feedback bits, our
DNN-based precoding scheme can achieve a higher downlink rate compared to
conventional linear precoding with codebook-based limited feedback.Comment: 6 pages, 4 figures, submitted to IEEE Transactions on Vehicular
Technolog
Achievable throughput with Block Diagonalization on OFDM indoor demonstrator
The proceeding at: 21st European Signal Processing Conference (EUSIPCO 2013), took place 2013, September 09-13, in Marrakech, Septiembre 2013.Block Diagonalization (BD) is a linear precoding transmission technique able to achieve full multiplexing gain in multiple antenna systems. In this work we present a Multiple-Input Multiple-Output (MIMO) implementation based on Orthogonal Frequency Division Multiplexing (OFDM) made up of a transmitter with 4 antennas and 2 users equipped with 2 antennas each one, which allows us to evaluate the performance of BD in indoor scenarios. First, the theoretic achievable rates are obtained for the measured channel in an offline evaluation. After that, the bit error rate performance is evaluated regarding the system sum throughput. To the best of our knowledge, this is the first time that BD performance is validated using a multiuser MIMO testbed.This work has been partially funded by research projects COMONSENS
(CSD2008-000 1 0), and GRE3N (TEC20 11-29006-C03-02).Publicad
- …