Energy efficient DBA algorithms for TWDM-PONs

Energy efficiency is of a vital significance in the design of next generation time and wavelength division multiplexed passive optical networks (TWDM-PONs). In this paper, we first review strategies to save energy in TWDM-PONs using the state-of-the-art dynamic bandwidth allocation (DBA) algorithms. The DBA algorithms should not only minimize energy consumption but should impose a minimal penalty on delay performance. In this context, mainly two DBA design paradigms can be exploited: offline and online. After reviewing the performance of various design paradigms, we propose an optimal algorithm, which minimizes the energy consumption at both the OLT and the ONUs, by combining the energy efficiency due to sleep modes and the load dependent use of transceivers at the OLT. Due to this, the average energy consumption is reduced to 31%

A QoS-Aware Dynamic Bandwidth Allocation algorithm for passive optical networks with non-zero laser tuning time

The deployment of new 5G services and future demands for 6G make it necessary to increase the performance of access networks. This challenge has prompted the development of new standardization proposals for Passive Optical access Networks (PONs) that offer greater bandwidth, greater reach and a higher rate of aggregation of users per fiber, being Time- and Wavelength-Division Multiplexing (TWDM) a promising technological solution for increasing the capacity by up to 40 Gbps by using several wavelengths. This solution introduces tunable transceivers into the Optical Network Units (ONUs) for switching from one wavelength to the other, thus addressing the ever-increasing bandwidth demands in residential broadband and mobile fronthaul networks based on Fiber to the Home (FTTH) technology. This adds complexity and sources of inefficiency, such as the laser tuning time (LTT) delay, which is often ignored when evaluating the performance of Dynamic Bandwidth Allocation (DBA) mechanisms. We present a novel DBA algorithm that dynamically handles the allocation of bandwidth and switches the ONUs’ lasers from one wavelength to the other while taking LTT into consideration. To optimize the packet delay, we introduce a scheduling mechanism that follows the Longest Processing Time first (LPT) scheduling discipline, which is implemented over the Interleaved Polling with Adaptive Cycle Time (IPACT) DBA. We also provide quality of service (QoS) differentiation by introducing the Max-Min Weighted Fair Share Queuing principle (WFQ) into the algorithm. The performance of our algorithm is evaluated through simulations against the original IPACT algorithm, which we have extended to support multi-wavelengths. With the introduction of LPT, we obtain an improved performance of up to 73% reduction in queue delay over IPACT while achieving QoS differentiation with WFQ.This work has been supported by the Agencia Estatal de Investigación of Spain under project PID2019‐108713RB‐C51/AEI/10.13039/501100011033.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les personesObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectivesPostprint (published version

Dynamic bandwidth allocation algorithms with non-zero laser tuning time in TWDM passive optical networks

The goal of this document is to analyse the functionality of Passive Optical Networks (PONs). The reason for focusing on these technique networks is due to their high efficiency in terms of high bandwidth, high rate, low energy consumption and low cost. PONs are composed of Optical Network Unit (ONU), Optical Line Terminal (OLT) and passive elements (splitters/combiners, optical fibres…). Specifically, this document analyses Ethernet Passive Optical Networks (EPONs) defined by Institute of Electrical and Electronics Engineers (IEEE) in the IEEE 802.3ah standard although there is another standard. The main difference between them is the framing protocol, being the EPONs compliance with Ethernet frames. The first PONs used a single optical carrier. That means that upstream channel is a shared resource and a scheduling is needed to avoid collisions between users’ transmissions, by using Time-Division Multiple Access (TDMA). In PONs the OLT plays an important paper, since it is the responsible of the dynamic bandwidth allocation (DBA). The DBA agent in the OLT has an algorithm that schedules the users’ transmissions. Since the deployment of the first PONs, the requirements of the users have increased, and users need high bandwidth and high rate. Thus, a new generation of PONs (NG-PON) have been designed. These next generation of PONs are multicarrier. That means that upstream channel that is a shared resource needs a Medium Access Protocol (MAC) based on wavelength/time-sharing known as Wavelength-Time Division Multiple Access (WTDMA). The algorithm placed on the DBA agent in the OLT increases its complexity. The algorithm should be able to schedule the transmissions based on time and wavelength. In the new generation of PON, in order to change the transmission wavelength, the ONUs have to retune their lasers. This wavelength change causes a tuning time delay. The target of this project is to design, implement and analyse an algorithm based on WTDMA and able to consider the tuning time delay and to minimize the global average delay of the system. Besides, the algorithm should apply the Just-In-Time (JIT) technique for increasing the system efficiency. All the simulations and implementations have been performed in the OPNET simulator, over a base code based on multicarrier EPON created by another student. In order to implement our algorithm a previous upgrading work has been realized for running the model and adapting it for the new requirements. We have succeeded in simulating an EPON with 4 channels where every channel has a 1 Gbps of bandwidth in OPNET simulator. In EPON we have introduced a laser tuning time control. Finally, we have implemented the designed algorithm. The algorithm schedules efficiently the network transmissions considering the laser tuning time delay. We have successfully simulated an EPON with 4 carriers, with 1 Gbps per carrier. Finally, we have implemented an algorithm able to schedule efficiently the network transmissions considering the laser tuning time delay

Supporting Diverse Customers and Prioritized Traffic in Next-Generation Passive Optical Networks

The already high demand for more bandwidth usage has been growing rapidly. Access network traffic is usually bursty in nature and the present traffic trend is mostly video-dominant. This motivates the need for higher transmission rates in the system. At the same time, the deployment costs and maintenance expenditures have to be reasonable. Therefore, Passive Optical Networks (PON) are considered promising next-generation access technologies. As the existing PON standards are not suitable to support future-PON services and applications, the FSAN (Full Service Access Network) group and the ITU-T (Telecommunication Standardization Sector of the International Telecommunication Union) have worked on developing the NG- PON2 (Next Generation PON 2) standard. Resource allocation is a fundamental task in any PON and it is necessary to have an efficient scheme that reduces delay, maximizes bandwidth usage, and minimizes the resource wastage. A variety of DBA (Dynamic Bandwidth Allocation) and DWBA (Dynamic Wavelength and Bandwidth Allocation) algorithms have been proposed which are based on different PONs (e.g. EPON, GPON, XG-PON, 10G- EPON, etc.). But to our knowledge, no DWBA scheme for NG-PON2 system, with diverse customers and prioritized traffic, has been proposed yet. In this work, this problem is addressed and five different dynamic wavelength and bandwidth allocation (DWBA) schemes are proposed. First, mixed integer linear programming (MILP) models are developed to minimize the total delay of the high priority data. Due to the MILP’s high computational complexity, heuristic algorithms are developed based on the MILP model insights. The five heuristics algorithms are: No Block-Split Heuristic (NBH), Equal Block-Split Heuristic (EBH), Priority Based No Block-Split Heuristic (P-NBH), Priority Based Equal Block-Split Heuristic (P-EBH), and Priority Based Decider Block-Split Heuristic (P-DBH). Six priority classes of requests are introduced with the goal of minimizing the total delay for the high priority data and to lessen the bandwidth wastage of the system. Finally, experiments for the performance evaluation of the five DWBA schemes are conducted. The results show that P-NBH, P-EBH, P-DBH schemes show a 47.63% less delay and 30% of less bandwidth wastage on average for the highest priority data transmission than the schemes without priority support (NBH and EBH). Among these five schemes, NBH method has the highest delay, whereas EBH and P-EBH waste more bandwidth than the other schemes. P-DBH is the most efficient among the five because this scheme offers the lowest delay for high priority data and the minimum bandwidth wastage for lower priority ones. Adviser: Byrav Ramamurth

Energy Conservation in Passive Optical Networks: A Tutorial and Survey

The Passive Optical Network (PON) has been evolving continuously in terms of architecture and capacity to keep up with the demand for high-speed Internet access in the access network segment. Recently, integration of Software-Defined Networking (SDN), which provides programmable and (logically) centralized network control, with PON has attracted intensive research interest to further enhance PON performance and reduce operational and capital expenditure. Although PON is regarded as an energy-efficient a ccess n etwork s olution, it is a major contributor for increasing energy consumption in the access network segment because of its higher penetration rate than other access network technologies. Over the past several years, the major standardization bodies like IEEE and research communities have engaged in introducing energy-efficient PON solutions. This article familiarizes readers with PON evolution in terms of capacity, architecture, and its integration with virtualization and SDN based control. We present a comprehensive survey of the energy conservation research efforts in PON starting from conventional PON to SDN based PON leveraging virtual and physical network functions. This article also presents contemporary energy-efficient standardization activities in IEEE and ITU. To the best of our knowledge, to date, this article is the first most comprehensive survey on energy saving research and standardization on PON. We summarize the lessons learned from the recent advancements, identify important challenges ahead and outline several future research directions that can contribute to further advancement of energy-efficient PON