Three-axis attitude determination via Kalman filtering of magnetometer data

A three-axis Magnetometer/Kalman Filter attitude determination system for a spacecraft in low-altitude Earth orbit is developed, analyzed, and simulation tested. The motivation for developing this system is to achieve light weight and low cost for an attitude determination system. The extended Kalman filter estimates the attitude, attitude rates, and constant disturbance torques. Accuracy near that of the International Geomagnetic Reference Field model is achieved. Covariance computation and simulation testing demonstrate the filter's accuracy. One test case, a gravity-gradient stabilized spacecraft with a pitch momentum wheel and a magnetically-anchored damper, is a real satellite on which this attitude determination system will be used. The application to a nadir pointing satellite and the estimation of disturbance torques represent the significant extensions contributed by this paper. Beyond its usefulness purely for attitude determination, this system could be used as part of a low-cost three-axis attitude stabilization system

Orbit determination and orbit control for the Earth Observing System (EOS) AM spacecraft

Future NASA Earth Observing System (EOS) Spacecraft will make measurements of the earth's clouds, oceans, atmosphere, land and radiation balance. These EOS Spacecraft will be part of the NASA Mission to Planet Earth. This paper specifically addresses the EOS AM Spacecraft, referred to as 'AM' because it has a sun-synchronous orbit with a 10:30 AM descending node. This paper describes the EOS AM Spacecraft mission orbit requirements, orbit determination, orbit control, and navigation system impact on earth based pointing. The EOS AM Spacecraft will be the first spacecraft to use the TDRSS Onboard Navigation System (TONS) as the primary means of navigation. TONS flight software will process one-way forward Doppler measurements taken during scheduled TDRSS contacts. An extended Kalman filter will estimate spacecraft position, velocity, drag coefficient correction, and ultrastable master oscillator frequency bias and drift. The TONS baseline algorithms, software, and hardware implementation are described in this paper. TONS integration into the EOS AM Spacecraft Guidance, Navigation, and Control (GN&C) System; TONS assisted onboard time maintenance; and the TONS Ground Support System (TGSS) are also addressed

Pilot Assisted Inertial Navigation System Aiding Using Bearings-Only Measurements Taken Over Time

The objective of this work is to develop an alternative INS aiding source other than the GPS, while preserving the autonomy of the integrated navigation system. It is proposed to develop a modernized method of aerial navigation using driftmeter measurements from an E/O system for ground feature tracking, and an independent altitude sensor in conjunction with the INS. The pilot will track a ground feature with the E/O system, while the aircraft is on autopilot holding constant airspeed, altitude, and heading during an INS aiding session. The ground feature measurements from the E/O system and the INS output form measurements provided to a linear KF running on the navigation computer to accomplish the INS aiding action. Aiding the INS will be periodically repeated as operationally permissible under pilot discretion. Little to no modeling error will be present when implementing the linear Kalman filter, indicating the strength of the INS aiding action will be exclusively determined by the prevailing degree of observability

Development and Flight of a Robust Optical-Inertial Navigation System Using Low-Cost Sensors

This research develops and tests a precision navigation algorithm fusing optical and inertial measurements of unknown objects at unknown locations. It provides an alternative to the Global Positioning System (GPS) as a precision navigation source, enabling passive and low-cost navigation in situations where GPS is denied/unavailable. This paper describes two new contributions. First, a rigorous study of the fundamental nature of optical/inertial navigation is accomplished by examining the observability grammian of the underlying measurement equations. This analysis yields a set of design principles guiding the development of optical/inertial navigation algorithms. The second contribution of this research is the development and flight test of an optical-inertial navigation system using low-cost and passive sensors (including an inexpensive commercial-grade inertial sensor, which is unsuitable for navigation by itself). This prototype system was built and flight tested at the U.S. Air Force Test Pilot School. The algorithm that was implemented leveraged the design principles described above, and used images from a single camera. It was shown (and explained by the observability analysis) that the system gained significant performance by aiding it with a barometric altimeter and magnetic compass, and by using a digital terrain database (DTED). The (still) low-cost and passive system demonstrated performance comparable to high quality navigation-grade inertial navigation systems, which cost an order of magnitude more than this optical-inertial prototype. The resultant performance of the system tested provides a robust and practical navigation solution for Air Force aircraft

Revolution in Autonomous Orbital Navigation (RAON)

Spacecraft navigation is a critical component of any space mission. Space navigation uses on-board sensors and other techniques to determine the spacecraft’s current position and velocity, with permissible accuracy. It also provides requisite information to navigate to a desired position, while following the desired trajectory. Developments in technology have resulted in new techniques of space navigation. However, inertial navigation systems have consistently been the bedrock for space navigation. Recently, the successful space mission GOCE used on-board gravity gradiometer for mapping Earth’s gravitational field. This has motivated the development of new techniques like cold atom accelerometers, to create ultra-sensitive gravity gradiometers, specifically suited for space applications, including autonomous orbital navigation. This research aims to highlight the existing developments in the field of gravity gradiometry and its potential space navigation applications. The study aims to use the Linear Covariance Theory to determine specific sensor requirements to enable autonomous space navigation for different flight regimes

Analysis of the theta-D filter as applied to hit-to-kill interceptors and satellite orbit determination

When designing feedback control systems, there is often a need for estimation methods that provide system information that is not readily available via sensors placed within the system. In many cases a sensor that measures a particular system state either does not exist or is prohibitively expensive. In addition, all realistic systems contain some degree of nonlinearity. This thesis focuses on two such cases: missile guidance with bearings-only measurements and GPS satellite orbit determination. In each case, a new nonlinear filter, the [theta]-D method, is used and evaluated for its performance in providing the necessary estimation. To aid the filter in the bearings-only application, a guidance law is formulated that assists the filter in estimating the target location despite the lack of range measurement. An implementation procedure, called the Staggered Filter Concept, is also presented for implementing a continuous filter, such as the [theta]-D filter, with measurements taken at discrete intervals. This procedure is used to implement the orbit determination algorithm on the Missouri S&T Satellite Team M-SAT mission --Abstract, page iii

Homography-Based State Estimation for Autonomous Exploration in Unknown Environments

This thesis presents the development of vision-based state estimation algorithms to enable a quadcopter UAV to navigate and explore a previously unknown GPS denied environment. These state estimation algorithms are based on tracked Speeded-Up Robust Features (SURF) points and the homography relationship that relates the camera motion to the locations of tracked planar feature points in the image plane. An extended Kalman filter implementation is developed to perform sensor fusion using measurements from an onboard inertial measurement unit (accelerometers and rate gyros) with vision-based measurements derived from the homography relationship. Therefore, the measurement update in the filter requires the processing of images from a monocular camera to detect and track planar feature points followed by the computation of homography parameters. The state estimation algorithms are designed to be independent of GPS since GPS can be unreliable or unavailable in many operational environments of interest such as urban environments. The state estimation algorithms are implemented using simulated data from a quadcopter UAV and then tested using post processed video and IMU data from flights of an autonomous quadcopter. The homography-based state estimation algorithm was effective, but accumulates drift errors over time due to the relativistic homography measurement of position