Design of sequences with good correlation properties

This thesis is dedicated to exploring sequences with good correlation properties. Periodic sequences with desirable correlation properties have numerous applications in communications. Ideally, one would like to have a set of sequences whose out-of-phase auto-correlation magnitudes and cross-correlation magnitudes are very small, preferably zero. However, theoretical bounds show that the maximum magnitudes of auto-correlation and cross-correlation of a sequence set are mutually constrained, i.e., if a set of sequences possesses good auto-correlation properties, then the cross-correlation properties are not good and vice versa. The design of sequence sets that achieve those theoretical bounds is therefore of great interest. In addition, instead of pursuing the least possible correlation values within an entire period, it is also interesting to investigate families of sequences with ideal correlation in a smaller zone around the origin. Such sequences are referred to as sequences with zero correlation zone or ZCZ sequences, which have been extensively studied due to their applications in 4G LTE and 5G NR systems, as well as quasi-synchronous code-division multiple-access communication systems. Paper I and a part of Paper II aim to construct sequence sets with low correlation within a whole period. Paper I presents a construction of sequence sets that meets the Sarwate bound. The construction builds a connection between generalised Frank sequences and combinatorial objects, circular Florentine arrays. The size of the sequence sets is determined by the existence of circular Florentine arrays of some order. Paper II further connects circular Florentine arrays to a unified construction of perfect polyphase sequences, which include generalised Frank sequences as a special case. The size of a sequence set that meets the Sarwate bound, depends on a divisor of the period of the employed sequences, as well as the existence of circular Florentine arrays. Paper III-VI and a part of Paper II are devoted to ZCZ sequences. Papers II and III propose infinite families of optimal ZCZ sequence sets with respect to some bound, which are used to eliminate interference within a single cell in a cellular network. Papers V, VI and a part of Paper II focus on constructions of multiple optimal ZCZ sequence sets with favorable inter-set cross-correlation, which can be used in multi-user communication environments to minimize inter-cell interference. In particular, Paper~II employs circular Florentine arrays and improves the number of the optimal ZCZ sequence sets with optimal inter-set cross-correlation property in some cases.Doktorgradsavhandlin

New Constructions of Zero-Correlation Zone Sequences

In this paper, we propose three classes of systematic approaches for constructing zero correlation zone (ZCZ) sequence families. In most cases, these approaches are capable of generating sequence families that achieve the upper bounds on the family size ($K$) and the ZCZ width ($T$) for a given sequence period ($N$). Our approaches can produce various binary and polyphase ZCZ families with desired parameters $(N,K,T)$ and alphabet size. They also provide additional tradeoffs amongst the above four system parameters and are less constrained by the alphabet size. Furthermore, the constructed families have nested-like property that can be either decomposed or combined to constitute smaller or larger ZCZ sequence sets. We make detailed comparisons with related works and present some extended properties. For each approach, we provide examples to numerically illustrate the proposed construction procedure.Comment: 37 pages, submitted to IEEE Transactions on Information Theor

A Direct Construction of Prime-Power-Length Zero-Correlation Zone Sequences for QS-CDMA System

In recent years, zero-correlation zone (ZCZ) sequences are being studied due to their significant applications in quasi-synchronous code division multiple access (QS-CDMA) systems and other wireless communication domains. However, the lengths of most existing ZCZ sequences are limited, and their parameters are not flexible, which are leading to practical limitations in their use in QS-CDMA and other communication systems. The current study proposes a direct construction of ZCZ sequences of prime-power length with flexible parameters by using multivariable functions. In the proposed construction, we first present a multivariable function to generate a vector with specific properties; this is further used to generate another class of multivariable functions to generate the desired $(p^t,(p-1)p^n,p^{n+t+1})$-ZCZ sequence set, where $p$ is a prime number, $t,n$ are positive integers, and $t\leq n$. The constructed ZCZ sequence set is optimal for the binary case and asymptotically optimal for the non-binary case by the \emph{Tang-Fan-Matsufuji} bound. Moreover, a relation between the second-order cosets of first-order generalized Reed-Muller code and the proposed ZCZ sequences is also established. The proposed construction of ZCZ sequences is compared with existing constructions, and it is observed that the parameters of this ZCZ sequence set are a generalization of that of in some existing works. Finally, the performance of the proposed ZCZ-based QS-CDMA system is compared with the Walsh-Hadamard and Gold code-based QS-CDMA system

Chip and Signature Interleaving in DS CDMA Systems

Siirretty Doriast

Performance Advantages of Maximum Likelihood Methods in PRBS-Modulated Time-of-flight Energy Loss Spectroscopy

This thesis describes the design, experimental performance, and theoretical simulation of a novel time-of-flight analyzer that was integrated into a high resolution electron energy loss spectrometer (TOF-HREELS). First we examined the use of an interleaved comb chopper for chopping a continuous electron beam. Both static and dynamic behaviors were simulated theoretically and measured experimentally, with very good agreement. The finite penetration of the field beyond the plane of the chopper leads to non-ideal chopper response, which is characterized in terms of an energy corruption effect and a lead or lag in the time at which the beam responds to the chopper potential. Second we considered the recovery of spectra from pseudo-random binary sequence (PRBS) modulated TOF-HREELS data. The effects of the Poisson noise distribution and the non-ideal behavior of the interleaved comb chopper were simulated. We showed, for the first time, that maximum likelihood methods can be combined with PRBS modulation to achieve resolution enhancement, while properly accounting for the Poisson noise distribution and artifacts introduced by the chopper. Our results indicate that meV resolution, similar to that of modern high resolution electron energy loss spectrometers, can be achieved with a dramatic performance advantage over conventional, serial detection analyzers. To demonstrate the capabilities of the TOF-HREELS instrument, we made measurements on a highly oriented thin film polytetrafluoroethylene (PTFE) sample. We demonstrated that the TOF-HREELS can achieve a throughput advantage of a factor of 85 compared to the conventional HREELS instrument. Comparisons were made between the experimental results and theoretical simulations. We discuss various factors which affect inversion of PRBS modulated Time of Flight (TOF) data with the Lucy algorithm. Using simulations, we conclude that the convolution assumption was good under the conditions of our experiment. The chopper rise time, Poisson noise, and artifacts of the chopper response are evaluated. Finally, we conclude that the maximum likelihood algorithms are able to gain a multiplex advantage in PRBS modulation, despite the Poisson noise in the detector

Advanced Statistical Modeling, Forecasting, and Fault Detection in Renewable Energy Systems

Fault detection, control, and forecasting have a vital role in renewable energy systems (Photovoltaics (PV) and wind turbines (WTs)) to improve their productivity, ef?ciency, and safety, and to avoid expensive maintenance. For instance, the main crucial and challenging issue in solar and wind energy production is the volatility of intermittent power generation due mainly to weather conditions. This fact usually limits the integration of PV systems and WTs into the power grid. Hence, accurately forecasting power generation in PV and WTs is of great importance for daily/hourly efficient management of power grid production, delivery, and storage, as well as for decision-making on the energy market. Also, accurate and prompt fault detection and diagnosis strategies are required to improve efficiencies of renewable energy systems, avoid the high cost of maintenance, and reduce risks of fire hazards, which could affect both personnel and installed equipment. This book intends to provide the reader with advanced statistical modeling, forecasting, and fault detection techniques in renewable energy systems

A model study of strong correlations in Hund metals

For a long time strong electronic correlations in metals have mainly been associated with Mottness, the proximity to a Mott metal-insulator transition (MIT), where large Coulomb interactions induce the localization of charges. However, triggered by the discovery of the iron-based superconductors about ten years ago, it was realized that multi-orbital materials with only moderate Coulomb but sizeable Hund’s rule interactions – so-called Hund metals – allow for a distinct screening mechanism towards strong correlations: Hundness. Here, Hund’s rule constrains the spin rather than the charge dynamics. This discovery led to a vividly debated fundamental issue in the field of strongly correlated condensed matter systems, which is the main topic of the present thesis: what is the origin of strong correlations in the normal phase of Hund metals, Mottness or Hundness? And what are their decisive fingerprints? The goal of this dissertation is twofold. First, we present and advance our method: the numerical renormalization group (NRG) as viable real-frequency multi-band impurity solver for dynamical mean-field theory (DMFT), a common approach to tackle strongly correlated systems. Second, we apply DMFT+NRG to shed light on the Hund-metal problem raised above. In the first part of this thesis we present our state-of-the-art NRG solver, which offers direct access to data with unprecedented real-frequency spectral resolution at arbitrarily low energies and temperatures in contrast to commonly used Quantum Monte Carlo solvers. It is based on matrix product states and exploits non-abelian symmetries to reduce numerical costs. In the case of orbital symmetry, this allows us to treat multi-band models with more than two bands, and thus to tackle the Hund-metal problem for the first time with NRG. For multi-band models without orbital symmetry, an “interleaved” scheme of NRG (iNRG) was recently developed, dramatically increasing the numerical efficiency. Remarkably, the accuracy of iNRG is comparable to standard NRG, as we reveal in a detailed study. This finding establishes iNRG as a promising DMFT solver for material-specific model simulations. In the second part of this thesis we study a minimal toy model for Hund metals with DMFT+NRG, the orbital-symmetric three-band Hubbard-Hund model (3HHM) close to a lattice filling of 1/3. Our major insight is “spin-orbital separation” (SOS), a Hund’s-ruleinduced two-stage Kondo-type screening process, in which orbital screening occurs at much higher energies than spin screening. In Hund metals, i.e. far from a MIT phase boundary, SOS thus causes large electron masses by strongly reducing the coherence scale below which a Fermi liquid is formed. Further, it opens up a broad incoherent and strongly particle-hole asymmetric intermediate energy regime that reaches up to bare excitation scales. This SOS regime shows fractional power-law behavior and is characterized by resilient “Hund quasiparticles” with itinerant orbital degrees of freedom coupled non-trivially to quasi-free large spins. At zero temperature, the local density of states exhibits a two-tier quasiparticle peak on top of a broad incoherent background. In contrast, in Mott-correlated metals, i.e. close to the MIT phase boundary, the SOS regime becomes negligibly small and the Hubbard bands are well separated. These findings lead to distinct signatures of Hundness and Mottness in the temperature dependence of ARPES spectra, static local susceptibilities, resistivity, thermopower and entropy, many of which were also found in realistic simulations of the archetypal Hund- and Mott-correlated materials, Sr2RuO4 and V2O3. In summary, we provide evidence that and elucidate how Hundness evokes strong correlation effects in Hund metals. This might help to better interpret experimental results and guide superconducting theories

Spread spectrum-based video watermarking algorithms for copyright protection

Merged with duplicate record 10026.1/2263 on 14.03.2017 by CS (TIS)Digital technologies know an unprecedented expansion in the last years. The consumer can now benefit from hardware and software which was considered state-of-the-art several years ago. The advantages offered by the digital technologies are major but the same digital technology opens the door for unlimited piracy. Copying an analogue VCR tape was certainly possible and relatively easy, in spite of various forms of protection, but due to the analogue environment, the subsequent copies had an inherent loss in quality. This was a natural way of limiting the multiple copying of a video material. With digital technology, this barrier disappears, being possible to make as many copies as desired, without any loss in quality whatsoever. Digital watermarking is one of the best available tools for fighting this threat. The aim of the present work was to develop a digital watermarking system compliant with the recommendations drawn by the EBU, for video broadcast monitoring. Since the watermark can be inserted in either spatial domain or transform domain, this aspect was investigated and led to the conclusion that wavelet transform is one of the best solutions available. Since watermarking is not an easy task, especially considering the robustness under various attacks several techniques were employed in order to increase the capacity/robustness of the system: spread-spectrum and modulation techniques to cast the watermark, powerful error correction to protect the mark, human visual models to insert a robust mark and to ensure its invisibility. The combination of these methods led to a major improvement, but yet the system wasn't robust to several important geometrical attacks. In order to achieve this last milestone, the system uses two distinct watermarks: a spatial domain reference watermark and the main watermark embedded in the wavelet domain. By using this reference watermark and techniques specific to image registration, the system is able to determine the parameters of the attack and revert it. Once the attack was reverted, the main watermark is recovered. The final result is a high capacity, blind DWr-based video watermarking system, robust to a wide range of attacks.BBC Research & Developmen

Cognitive Radio Systems

Cognitive radio is a hot research area for future wireless communications in the recent years. In order to increase the spectrum utilization, cognitive radio makes it possible for unlicensed users to access the spectrum unoccupied by licensed users. Cognitive radio let the equipments more intelligent to communicate with each other in a spectrum-aware manner and provide a new approach for the co-existence of multiple wireless systems. The goal of this book is to provide highlights of the current research topics in the field of cognitive radio systems. The book consists of 17 chapters, addressing various problems in cognitive radio systems

Microwave performance characterization of large space antennas

Performance capabilities of large microwave space antenna configurations with apertures generally from 100 wavelengths upwards are discussed. Types of antennas considered include: phased arrays, lenses, reflectors, and hybrid combinations of phased arrays with reflectors or lenses. The performance characteristics of these broad classes of antennas are examined and compared in terms of applications