Effect of sterilization by gamma radiation on nano-mechanical properties of teeth

NOTICE: this is the author’s version of a work that was accepted for publication in Dental Materials. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Dental Materials, [VOL 24, ISSUE 8, (2008)] DOI: 10.1016/j.dental.2008.02.016.Objectives: Extracted teeth used in dental research need to be considered infective and hence be sterilized without the materials' properties being altered. This study examined the effect of gamma radiation on the nano-mechanical properties of dentin and enamel of extracted human third molars. Methods: Whole teeth were sterilized using gamma radiation doses of 7kGy and 35kGy, respectively; teeth of the control group were not treated with gamma radiation. Crowns were sectioned occlusally and polished. Elastic modulus and hardness were tested using atomic force microscopy with nano-indentations under wet conditions. Results: The authors found no significant dose-response relationship in elastic modulus or hardness in either dentin or enamel. Significance: Nano-indentation is a common technique for the determination of local mechanical properties in biological hard tissues. Gamma radiation is an efficient way to sterilize extracted teeth while alteration of dentin and enamel mechanical properties are minimized

Nano- and micromechanical properties of dentine: Investigation of differences with tooth side

NOTICE: this is the author’s version of a work that was accepted for publication in Journal of Biomechanics. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Biomechanics, [VOL 44, (2011)] DOI: 10.1016/j.jbiomech.2011.03.00

Nanodiamond-Gutta Percha Composite Biomaterials for Root Canal Therapy.

Root canal therapy (RCT) represents a standard of treatment that addresses infected pulp tissue in teeth and protects against future infection. RCT involves removing dental pulp comprising blood vessels and nerve tissue, decontaminating residually infected tissue through biomechanical instrumentation, and root canal obturation using a filler material to replace the space that was previously composed of dental pulp. Gutta percha (GP) is typically used as the filler material, as it is malleable, inert, and biocompatible. While filling the root canal space with GP is the standard of care for endodontic therapies, it has exhibited limitations including leakage, root canal reinfection, and poor mechanical properties. To address these challenges, clinicians have explored the use of alternative root filling materials other than GP. Among the classes of materials that are being explored as novel endodontic therapy platforms, nanodiamonds (NDs) may offer unique advantages due to their favorable properties, particularly for dental applications. These include versatile faceted surface chemistry, biocompatibility, and their role in improving mechanical properties, among others. This study developed a ND-embedded GP (NDGP) that was functionalized with amoxicillin, a broad-spectrum antibiotic commonly used for endodontic infection. Comprehensive materials characterization confirmed improved mechanical properties of NDGP over unmodified GP. In addition, digital radiography and microcomputed tomography imaging demonstrated that obturation of root canals with NDGP could be achieved using clinically relevant techniques. Furthermore, bacterial growth inhibition assays confirmed drug functionality of NDGP functionalized with amoxicillin. This study demonstrates a promising path toward NDGP implementation in future endodontic therapy for improved treatment outcomes

Graphene-based nanomaterials for tissue engineering in the dental field

The world of dentistry is approaching graphene-based nanomaterials as substitutes for tissue engineering. Apart from its exceptional mechanical strength, electrical conductivity and thermal stability, graphene and its derivatives can be functionalized with several bioactive molecules. They can also be incorporated into different scaffolds used in regenerative dentistry, generating nanocomposites with improved characteristics. This review presents the state of the art of graphene-based nanomaterial applications in the dental field. We first discuss the interactions between cells and graphene, summarizing the available in vitro and in vivo studies concerning graphene biocompatibility and cytotoxicity. We then highlight the role of graphene-based nanomaterials in stem cell control, in terms of adhesion, proliferation and differentiation. Particular attention will be given to stem cells of dental origin, such as those isolated from dental pulp, periodontal ligament or dental follicle. The review then discusses the interactions between graphene-based nanomaterials with cells of the immune system; we also focus on the antibacterial activity of graphene nanomaterials. In the last section, we offer our perspectives on the various opportunities facing the use of graphene and its derivatives in associations with titanium dental implants, membranes for bone regeneration, resins, cements and adhesives as well as for tooth-whitening procedure

Template assisted surface micro microstructuring of flowable dental composites and its effect on the microbial adhesion properties

Despite their various advantages, such as good esthetic properties, absence of mercury and adhesive bonding to teeth, modern dental composites still have some drawbacks, e.g., a relatively high rate of secondary caries on teeth filled with composite materials. Recent research suggests that microstructured biomaterials surfaces may reduce microbial adhesion to materials due to unfavorable physical material–microbe interactions. The objectives of this study were, therefore, to test the hypotheses that (i) different surface microstructures can be created on composites by a novel straightforward approach potentially suitable for clinical application and (ii) that these surface structures have a statistically significant effect on microbial adhesion properties.Peer ReviewedPostprint (author's final draft

A Current Overview of Materials and Strategies for Potential Use in Maxillofacial Tissue Regeneration

Tissue regeneration is rapidly evolving to treat anomalies in the entire human body. The production of biodegradable, customizable scaffolds to achieve this clinical aim is dependent on the interdisciplinary collaboration among clinicians, bioengineers and materials scientists. While bone grafts and varying reconstructive procedures have been traditionally used for maxillofacial defects, the goal of this review is to provide insight on all materials involved in the progressing utilization of the tissue engineering approach to yield successful treatment outcomes for both hard and soft tissues. In vitro and in vivo studies that have demonstrated the restoration of bone and cartilage tissue with different scaffold material types, stem cells and growth factors show promise in regenerative treatment interventions for maxillofacial defects. The repair of the temporomandibular joint (TMJ) disc and mandibular bone were discussed extensively in the report, supported by evidence of regeneration of the same tissue types in different medical capacities. Furthermore, in addition to the thorough explanation of polymeric, ceramic, and composite scaffolds, this review includes the application of biodegradable metallic scaffolds for regeneration of hard tissue. The purpose of compiling all the relevant information in this review is to lay the foundation for future investigation in materials used in scaffold synthesis in the realm of oral and maxillofacial surgery

Evaluation of the effect of adding micro-hydroxyapatite and nano-hydroxyapatite on the microleakage of conventional and resin-modified Glass-ionomer Cl V restorations

Pulpal reaction to restorative materials depends on marginal microleakage, which is a dynamic phenomenon that allows bacteria and fluids to traverse across the tooth-restoration interface. Glass-ionomer cement (GIC) exhibits low microleakage due to direct bonding to tooth structures. Hydroxyapatite (HAP) based on the similarity with tooth structure may decrease the microleakage. The aim of this in vitro study was to evaluate marginal microleakage of a mixture of conventional and resin-modified glass-ionomer (RMGI) with micro- and nano-HAP. In this in vitro study, 30 non-carious extracted human third molar teeth were used. Standard Cl V cavities were prepared on the buccal and lingual surfaces. The cavities were restored in six experimental groups as follows: group 1, conventional glass-ionomer cement (CGIC); group 2, CGIC with micro-HAP; group 3, CGIC with nano-HAP; group 4, RMGI; group 5, RMGI with micro-HAP; group 6, RMGI with nano-HAP. The restorations were finished and polished. The teeth were coated with nail polish, sealed with sticky wax, thermocycled and placed in a solution of 2% basic fuchsine for 24 hours. The teeth were sectioned and microleakage was measured. Kruskal-Wallis, Man-Whitney and Wilcoxon tests were used for data analysis (P<0.05). The data analysis revealed significantly lower microleakage in groups 5 and 6 at both occlusal and gingival margins. Also in these two groups the gingival microleakage was significantly lower than occlusal margin (P=0.009 and P=0.001 respectively), but in groups 1(CGIC) and 3(CGIC+ nano-HAP) and 4(RMGI) the microleakage of occlusal margin were significantly lower than that of gingival margin (P=0.001, P=0.007 and P=0.001 respectively). Mixing RMGI with nano-HAP and micro-HAP resulted in lower microleakage

Recent Advancements in Regenerative Dentistry: A Review

Although human mouth benefits from remarkable mechanical properties, it is very susceptible to traumatic damages, exposure to microbial attacks, and congenital maladies. Since the human dentition plays a crucial role in mastication, phonation and esthetics, finding promising and more efficient strategies to reestablish its functionality in the event of disruption has been important. Dating back to antiquity, conventional dentistry has been offering evacuation, restoration, and replacement of the diseased dental tissue. However, due to the limited ability and short lifespan of traditional restorative solutions, scientists have taken advantage of current advancements in medicine to create better solutions for the oral health field and have coined it “regenerative dentistry.” This new field takes advantage of the recent innovations in stem cell research, cellular and molecular biology, tissue engineering, and materials science etc. In this review, the recently known resources and approaches used for regeneration of dental and oral tissues were evaluated using the databases of Scopus and Web of Science. Scientists have used a wide range of biomaterials and scaffolds (artificial and natural), genes (with viral and non-viral vectors), stem cells (isolated from deciduous teeth, dental pulp, periodontal ligament, adipose tissue, salivary glands, and dental follicle) and growth factors (used for stimulating cell differentiation) in order to apply tissue engineering approaches to dentistry. Although they have been successful in preclinical and clinical partial regeneration of dental tissues, whole-tooth engineering still seems to be far-fetched, unless certain shortcomings are addressed