Multisensor Out Of Sequence Data Fusion for Estimating the State of Discrete Control Systems

The fusion center of a complex control system estimates its state with the information provided by different sensors. Physically distributed sensors, communication networks, pre-processing algorithms, multitasking, etc, introduce non-systematic delays in the arrival of information to the fusion center, making the information available out-of-sequence (OOS). For real-time control systems, the state has to be efficiently estimated with all the information received so far. So, several solutions of the OOS problem for dynamic multiple-input multiple-output (MIMO) discrete control systems traditionally solved by the Kalman filter (KF) have been proposed recently. This paper presents two new streamlined algorithms for the linear and non-linear case. IFAsyn, the linear algorithm, is equivalent to other optimal solutions but more general, efficient and easy to implement. EIFAsyn, the nonlinear one, is a new solution of the OOS problem in the extended KF (EKF) framework

Bibliographic Review on Distributed Kalman Filtering

In recent years, a compelling need has arisen to understand the effects of distributed information structures on estimation and filtering. In this paper, a bibliographical review on distributed Kalman filtering (DKF) is provided.\ud The paper contains a classification of different approaches and methods involved to DKF. The applications of DKF are also discussed and explained separately. A comparison of different approaches is briefly carried out. Focuses on the contemporary research are also addressed with emphasis on the practical applications of the techniques. An exhaustive list of publications, linked directly or indirectly to DKF in the open literature, is compiled to provide an overall picture of different developing aspects of this area

Review of the mathematical foundations of data fusion techniques in surface metrology

The recent proliferation of engineered surfaces, including freeform and structured surfaces, is challenging current metrology techniques. Measurement using multiple sensors has been proposed to achieve enhanced benefits, mainly in terms of spatial frequency bandwidth, which a single sensor cannot provide. When using data from different sensors, a process of data fusion is required and there is much active research in this area. In this paper, current data fusion methods and applications are reviewed, with a focus on the mathematical foundations of the subject. Common research questions in the fusion of surface metrology data are raised and potential fusion algorithms are discussed

Extended Object Tracking: Introduction, Overview and Applications

This article provides an elaborate overview of current research in extended object tracking. We provide a clear definition of the extended object tracking problem and discuss its delimitation to other types of object tracking. Next, different aspects of extended object modelling are extensively discussed. Subsequently, we give a tutorial introduction to two basic and well used extended object tracking approaches - the random matrix approach and the Kalman filter-based approach for star-convex shapes. The next part treats the tracking of multiple extended objects and elaborates how the large number of feasible association hypotheses can be tackled using both Random Finite Set (RFS) and Non-RFS multi-object trackers. The article concludes with a summary of current applications, where four example applications involving camera, X-band radar, light detection and ranging (lidar), red-green-blue-depth (RGB-D) sensors are highlighted.Comment: 30 pages, 19 figure

Opportunity Trajectory Reconstruction Techniques for Evaluation of ATC Systems

This paper describes some key points of a new tool being currently developed by Eurocontrol for the assessment of air traffic control (ATC) multisensor trackers performance. It summarizes the algorithmic foundations of the high-accuracy trajectory reconstruction process used to obtain reference trajectories from recorded measures. These trajectories will serve as a reference for the evaluation of the accuracy of ATC data processing centers. The performance of the system is illustrated with some reconstruction experiments on synthetic and real data

Real-time detection of auditory : steady-state brainstem potentials evoked by auditory stimuli

The auditory steady-state response (ASSR) is advantageous against other hearing techniques because of its capability in providing objective and frequency specific information. The objectives are to reduce the lengthy test duration, and improve the signal detection rate and the robustness of the detection against the background noise and unwanted artefacts.Two prominent state estimation techniques of Luenberger observer and Kalman filter have been used in the development of the autonomous ASSR detection scheme. Both techniques are real-time implementable, while the challenges faced in the application of the observer and Kalman filter techniques are the very poor SNR (could be as low as −30dB) of ASSRs and unknown statistics of the noise. Dual-channel architecture is proposed, one is for the estimate of sinusoid and the other for the estimate of the background noise. Simulation and experimental studies were also conducted to evaluate the performances of the developed ASSR detection scheme, and to compare the new method with other conventional techniques. In general, both the state estimation techniques within the detection scheme produced comparable results as compared to the conventional techniques, but achieved significant measurement time reduction in some cases. A guide is given for the determination of the observer gains, while an adaptive algorithm has been used for adjustment of the gains in the Kalman filters.In order to enhance the robustness of the ASSR detection scheme with adaptive Kalman filters against possible artefacts (outliers), a multisensory data fusion approach is used to combine both standard mean operation and median operation in the ASSR detection algorithm. In addition, a self-tuned statistical-based thresholding using the regression technique is applied in the autonomous ASSR detection scheme. The scheme with adaptive Kalman filters is capable of estimating the variances of system and background noise to improve the ASSR detection rate

Algorithms for sensor validation and multisensor fusion

Existing techniques for sensor validation and sensor fusion are often based on analytical sensor models. Such models can be arbitrarily complex and consequently Gaussian distributions are often assumed, generally with a detrimental effect on overall system performance. A holistic approach has therefore been adopted in order to develop two novel and complementary approaches to sensor validation and fusion based on empirical data. The first uses the Nadaraya-Watson kernel estimator to provide competitive sensor fusion. The new algorithm is shown to reliably detect and compensate for bias errors, spike errors, hardover faults, drift faults and erratic operation, affecting up to three of the five sensors in the array. The inherent smoothing action of the kernel estimator provides effective noise cancellation and the fused result is more accurate than the single 'best sensor'. A Genetic Algorithm has been used to optimise the Nadaraya-Watson fuser design. The second approach uses analytical redundancy to provide the on-line sensor status output μH∈[0,1], where μH=1 indicates the sensor output is valid and μH=0 when the sensor has failed. This fuzzy measure is derived from change detection parameters based on spectral analysis of the sensor output signal. The validation scheme can reliably detect a wide range of sensor fault conditions. An appropriate context dependent fusion operator can then be used to perform competitive, cooperative or complementary sensor fusion, with a status output from the fuser providing a useful qualitative indication of the status of the sensors used to derive the fused result. The operation of both schemes is illustrated using data obtained from an array of thick film metal oxide pH sensor electrodes. An ideal pH electrode will sense only the activity of hydrogen ions, however the selectivity of the metal oxide device is worse than the conventional glass electrode. The use of sensor fusion can therefore reduce measurement uncertainty by combining readings from multiple pH sensors having complementary responses. The array can be conveniently fabricated by screen printing sensors using different metal oxides onto a single substrate

Localization of Non-Linearly Modeled Autonomous Mobile Robots Using Out-of-Sequence Measurements

This paper presents a state of the art of the estimation algorithms dealing with Out-of-Sequence (OOS) measurements for non-linearly modeled systems. The state of the art includes a critical analysis of the algorithm properties that takes into account the applicability of these techniques to autonomous mobile robot navigation based on the fusion of the measurements provided, delayed and OOS, by multiple sensors. Besides, it shows a representative example of the use of one of the most computationally efficient approaches in the localization module of the control software of a real robot (which has non-linear dynamics, and linear and non-linear sensors) and compares its performance against other approaches. The simulated results obtained with the selected OOS algorithm shows the computational requirements that each sensor of the robot imposes to it. The real experiments show how the inclusion of the selected OOS algorithm in the control software lets the robot successfully navigate in spite of receiving many OOS measurements. Finally, the comparison highlights that not only is the selected OOS algorithm among the best performing ones of the comparison, but it also has the lowest computational and memory cost