Hemispherical confocal imaging using turtleback reflector

We propose a new imaging method called hemispherical confocal imaging to clearly visualize a particular depth in a 3-D scene. The key optical component is a turtleback reflector which is a specially designed polyhedral mirror. By combining the turtleback reflector with a coaxial pair of a camera and a projector, many virtual cameras and projectors are produced on a hemisphere with uniform density to synthesize a hemispherical aperture. In such an optical device, high frequency illumination can be focused at a particular depth in the scene to visualize only the depth with descattering. Then, the observed views are factorized into masking, attenuation, and texture terms to enhance visualization when obstacles are present. Experiments using a prototype system show that only the particular depth is effectively illuminated and hazes by scattering and attenuation can be recovered even when obstacles exist.Microsoft ResearchJapan Society for the Promotion of Science (Grants-in-Aid For Scientific Research 21680017)Japan Society for the Promotion of Science (Grants-in-Aid For Scientific Research 21650038

BxDF material acquisition, representation, and rendering for VR and design

Photorealistic and physically-based rendering of real-world environments with high fidelity materials is important to a range of applications, including special effects, architectural modelling, cultural heritage, computer games, automotive design, and virtual reality (VR). Our perception of the world depends on lighting and surface material characteristics, which determine how the light is reflected, scattered, and absorbed. In order to reproduce appearance, we must therefore understand all the ways objects interact with light, and the acquisition and representation of materials has thus been an important part of computer graphics from early days. Nevertheless, no material model nor acquisition setup is without limitations in terms of the variety of materials represented, and different approaches vary widely in terms of compatibility and ease of use. In this course, we describe the state of the art in material appearance acquisition and modelling, ranging from mathematical BSDFs to data-driven capture and representation of anisotropic materials, and volumetric/thread models for patterned fabrics. We further address the problem of material appearance constancy across different rendering platforms. We present two case studies in architectural and interior design. The first study demonstrates Yulio, a new platform for the creation, delivery, and visualization of acquired material models and reverse engineered cloth models in immersive VR experiences. The second study shows an end-to-end process of capture and data-driven BSDF representation using the physically-based Radiance system for lighting simulation and rendering

BRDF representation and acquisition

Photorealistic rendering of real world environments is important in a range of different areas; including Visual Special effects, Interior/Exterior Modelling, Architectural Modelling, Cultural Heritage, Computer Games and Automotive Design. Currently, rendering systems are able to produce photorealistic simulations of the appearance of many real-world materials. In the real world, viewer perception of objects depends on the lighting and object/material/surface characteristics, the way a surface interacts with the light and on how the light is reflected, scattered, absorbed by the surface and the impact these characteristics have on material appearance. In order to re-produce this, it is necessary to understand how materials interact with light. Thus the representation and acquisition of material models has become such an active research area. This survey of the state-of-the-art of BRDF Representation and Acquisition presents an overview of BRDF (Bidirectional Reflectance Distribution Function) models used to represent surface/material reflection characteristics, and describes current acquisition methods for the capture and rendering of photorealistic materials

BRDF Representation and Acquisition

Photorealistic rendering of real world environments is important in a range of different areas; including Visual Special effects, Interior/Exterior Modelling, Architectural Modelling, Cultural Heritage, Computer Games and Automotive Design. Currently, rendering systems are able to produce photorealistic simulations of the appearance of many real-world materials. In the real world, viewer perception of objects depends on the lighting and object/material/surface characteristics, the way a surface interacts with the light and on how the light is reflected, scattered, absorbed by the surface and the impact these characteristics have on material appearance. In order to re-produce this, it is necessary to understand how materials interact with light. Thus the representation and acquisition of material models has become such an active research area. This survey of the state-of-the-art of BRDF Representation and Acquisition presents an overview of BRDF (Bidirectional Reflectance Distribution Function) models used to represent surface/material reflection characteristics, and describes current acquisition methods for the capture and rendering of photorealistic materials

Development of a calibration pipeline for a monocular-view structured illumination 3D sensor utilizing an array projector

Commercial off-the-shelf digital projection systems are commonly used in active structured illumination photogrammetry of macro-scale surfaces due to their relatively low cost, accessibility, and ease of use. They can be described as inverse pinhole modelled. The calibration pipeline of a 3D sensor utilizing pinhole devices in a projector-camera setup configuration is already well-established. Recently, there have been advances in creating projection systems offering projection speeds greater than that available from conventional off-the-shelf digital projectors. However, they cannot be calibrated using well established techniques based on the pinole assumption. They are chip-less and without projection lens. This work is based on the utilization of unconventional projection systems known as array projectors which contain not one but multiple projection channels that project a temporal sequence of illumination patterns. None of the channels implement a digital projection chip or a projection lens. To workaround the calibration problem, previous realizations of a 3D sensor based on an array projector required a stereo-camera setup. Triangulation took place between the two pinhole modelled cameras instead. However, a monocular setup is desired as a single camera configuration results in decreased cost, weight, and form-factor. This study presents a novel calibration pipeline that realizes a single camera setup. A generalized intrinsic calibration process without model assumptions was developed that directly samples the illumination frustum of each array projection channel. An extrinsic calibration process was then created that determines the pose of the single camera through a downhill simplex optimization initialized by particle swarm. Lastly, a method to store the intrinsic calibration with the aid of an easily realizable calibration jig was developed for re-use in arbitrary measurement camera positions so that intrinsic calibration does not have to be repeated

Image based surface reflectance remapping for consistent and tool independent material appearence

Physically-based rendering in Computer Graphics requires the knowledge of material properties other than 3D shapes, textures and colors, in order to solve the rendering equation. A number of material models have been developed, since no model is currently able to reproduce the full range of available materials. Although only few material models have been widely adopted in current rendering systems, the lack of standardisation causes several issues in the 3D modelling workflow, leading to a heavy tool dependency of material appearance. In industry, final decisions about products are often based on a virtual prototype, a crucial step for the production pipeline, usually developed by a collaborations among several departments, which exchange data. Unfortunately, exchanged data often tends to differ from the original, when imported into a different application. As a result, delivering consistent visual results requires time, labour and computational cost. This thesis begins with an examination of the current state of the art in material appearance representation and capture, in order to identify a suitable strategy to tackle material appearance consistency. Automatic solutions to this problem are suggested in this work, accounting for the constraints of real-world scenarios, where the only available information is a reference rendering and the renderer used to obtain it, with no access to the implementation of the shaders. In particular, two image-based frameworks are proposed, working under these constraints. The first one, validated by means of perceptual studies, is aimed to the remapping of BRDF parameters and useful when the parameters used for the reference rendering are available. The second one provides consistent material appearance across different renderers, even when the parameters used for the reference are unknown. It allows the selection of an arbitrary reference rendering tool, and manipulates the output of other renderers in order to be consistent with the reference

Kaleidoscopic imaging

Kaleidoscopes have a great potential in computational photography as a tool for redistributing light rays. In time-of-flight imaging the concept of the kaleidoscope is also useful when dealing with the reconstruction of the geometry that causes multiple reflections. This work is a step towards opening new possibilities for the use of mirror systems as well as towards making their use more practical. The focus of this work is the analysis of planar kaleidoscope systems to enable their practical applicability in 3D imaging tasks. We analyse important practical properties of mirror systems and develop a theoretical toolbox for dealing with planar kaleidoscopes. Based on this theoretical toolbox we explore the use of planar kaleidoscopes for multi-view imaging and for the acquisition of 3D objects. The knowledge of the mirrors positions is crucial for these multi-view applications. On the other hand, the reconstruction of the geometry of a mirror room from time-of-flight measurements is also an important problem. We therefore employ the developed tools for solving this problem using multiple observations of a single scene point.Kaleidoskope haben in der rechnergestützten Fotografie ein großes Anwendungspotenzial, da sie flexibel zur Umverteilung von Lichtstrahlen genutzt werden können. Diese Arbeit ist ein Schritt auf dem Weg zu neuen Einsatzmöglichkeiten von Spiegelsystemen und zu ihrer praktischen Anwendung. Das Hauptaugenmerk der Arbeit liegt dabei auf der Analyse planarer Spiegelsysteme mit dem Ziel, sie für Aufgaben in der 3D-Bilderzeugung praktisch nutzbar zu machen. Auch für die Time-of-flight-Technologie ist das Konzept des Kaleidoskops, wie in der Arbeit gezeigt wird, bei der Rekonstruktion von Mehrfachreflektionen erzeugender Geometrie von Nutzen. In der Arbeit wird ein theoretischer Ansatz entwickelt der die Analyse planarer Kaleidoskope stark vereinfacht. Mithilfe dieses Ansatzes wird der Einsatz planarer Spiegelsysteme im Multiview Imaging und bei der Erfassung von 3-D-Objekten untersucht. Das Wissen um die Spiegelpositionen innerhalb des Systems ist für diese Anwendungen entscheidend und erfordert die Entwicklung geeigneter Methoden zur Kalibrierung dieser Positionen. Ein ähnliches Problem tritt in Time-of-Flight Anwendungen bei der, oft unerwünschten, Aufnahme von Mehrfachreflektionen auf. Beide Problemstellungen lassen sich auf die Rekonstruktion der Geometrie eines Spiegelraums zurückführen, das mit Hilfe des entwickelten Ansatzes in allgemeinererWeise als bisher gelöst werden kann