Optimal Point-to-Point Trajectory Tracking of Redundant Manipulators using Generalized Pattern Search

Optimal point-to-point trajectory planning for planar redundant manipulator is considered in this study. The main objective is to minimize the sum of the position error of the end-effector at each intermediate point along the trajectory so that the end-effector can track the prescribed trajectory accurately. An algorithm combining Genetic Algorithm and Pattern Search as a Generalized Pattern Search GPS is introduced to design the optimal trajectory. To verify the proposed algorithm, simulations for a 3-D-O-F planar manipulator with different end-effector trajectories have been carried out. A comparison between the Genetic Algorithm and the Generalized Pattern Search shows that The GPS gives excellent tracking performance.Comment: www.ars-journal.co

An evolutionary approach for the motion planning of redundant and hyper-redundant manipulators

The trajectory planning of redundant robots is an important area of research and efficient optimization algorithms are needed. The pseudoinverse control is not repeatable, causing drift in joint space which is undesirable for physical control. This paper presents a new technique that combines the closed-loop pseudoinverse method with genetic algorithms, leading to an optimization criterion for repeatable control of redundant manipulators, and avoiding the joint angle drift problem. Computer simulations performed based on redundant and hyper-redundant planar manipulators show that, when the end-effector traces a closed path in the workspace, the robot returns to its initial configuration. The solution is repeatable for a workspace with and without obstacles in the sense that, after executing several cycles, the initial and final states of the manipulator are very close

Fast Manipulability Maximization Using Continuous-Time Trajectory Optimization

A significant challenge in manipulation motion planning is to ensure agility in the face of unpredictable changes during task execution. This requires the identification and possible modification of suitable joint-space trajectories, since the joint velocities required to achieve a specific endeffector motion vary with manipulator configuration. For a given manipulator configuration, the joint space-to-task space velocity mapping is characterized by a quantity known as the manipulability index. In contrast to previous control-based approaches, we examine the maximization of manipulability during planning as a way of achieving adaptable and safe joint space-to-task space motion mappings in various scenarios. By representing the manipulator trajectory as a continuous-time Gaussian process (GP), we are able to leverage recent advances in trajectory optimization to maximize the manipulability index during trajectory generation. Moreover, the sparsity of our chosen representation reduces the typically large computational cost associated with maximizing manipulability when additional constraints exist. Results from simulation studies and experiments with a real manipulator demonstrate increases in manipulability, while maintaining smooth trajectories with more dexterous (and therefore more agile) arm configurations.Comment: In Proceedings of the IEEE International Conference on Intelligent Robots and Systems (IROS'19), Macau, China, Nov. 4-8, 201

GA based adaptive singularity-robust path planning of space robot for on-orbit detection

As a new on-orbit detection platform, the space robot could ensure stable and reliable operation of spacecraft in complex space environments. The tracking accuracy of the space manipulator end-effector is crucial to the detection precision. In this paper, the Cartesian path planning method of velocity level inverse kinematics based on generalized Jacobian matrix (GJM) is proposed. The GJM will come across singularity issue in path planning, which leads to the infinite or incalculable joint velocity. To solve this issue, firstly, the singular value decomposition (SVD) is used for exposition of the singularity avoidance principle of the damped least squares (DLS) method. After that, the DLS method is improved by introducing an adaptive damping factor which changes with the singularity. Finally, in order to improve the tracking accuracy of the singularity-robust algorithm, the objective function is established, and two adaptive parameters are optimized by genetic algorithm (GA). The simulation of a 6-DOF free-floating space robot is carried out, and the results show that, compared with DLS method, the proposed method could improve the tracking accuracy of space manipulator end-effector

A GA perspective of the energy requirements for manipulators maneuvering in a workspace with obstacles

This paper proposes a genetic algorithm to generate trajectories for robotic manipulators. The objective is to minimze the ripple in the trajectory time evolution and to minimize the actuator energy requirements without colliding with any obstacles in the workspace. The article presents the results for several redundant and hyper-redundant manipulators.N/

Design and Modeling of 9 Degrees of Freedom Redundant Robotic Manipulator

In disaster areas, robot manipulators are used to rescue and clearance of sites. Because of the damaged area, they encounter disturbances like obstacles, and limited workspace to explore the area and to achieve the location of the victims. Increasing the degrees of freedom is required to boost the adaptability of manipulators to avoid disturbances, and to obtain the fast desired position and precise movements of the end-effector. These robot manipulators offer a reliable way to handle the barrier challenges since they can search in places that humans can't reach. In this research paper, the 9-DOF robotic manipulator is designed, and an analytical model is developed to examine the system’s behavior in different scenarios. The kinematic and dynamic representation of the proposed model is analyzed to obtain the translation or rotation, and joint torques to achieve the expected position, velocity, and acceleration respectively. The number of degrees may be raised to avoid disturbances, and to obtain the fast desired position and precise movements of the end-effector. The simulation of developed models is performed to ensure the adaptable movement of the manipulators working in distinct configurations and controlling their motion thoroughly and effectively. In the proposed configuration the joints can easily be moved to achieve the desired position of the end-effector and the results are satisfactory. The simulation results show that the redundant manipulator achieves the victim location with various configurations of the manipulator. Results reveal the effectiveness and efficacy of the proposed system

Dynamic Path Planning for a 7-DOF Robot Arm

Klanke S, Lebedev DV, Haschke R, Steil JJ, Ritter H. Dynamic Path Planning for a 7-DOF Robot Arm. In: Int. Conf. Intelligent Robots and Systems. IEEE; 2006: 3879-3884

Optimization Of Energy Consumption In KUKA KR 16 Articulated Robot Manipulator

A study for optimal energy consumption in KUKA KR 16 articulated robot for pick-and-place task was introduce in this paper. In order to achieve the optimal energy consumption, an improve trajectory planning is required. Essentially, trajectory planning encompasses path planning in addition to planning how to move based on velocity, time and kinematics. Trajectory planning gives a path from a starting to a goal point by avoiding collisions in a 2D or 3D space. Therefore, this paper is focus on analyze the PTP motion and Linear motion in order to determine which is the best motion that can improve the trajectory planning. The optimal energy consumption to minimizing the movement based on three main axes where it used a big motors used to drive the axes. This method is much simpler in terms of development process and did not require any additional hardware to be install to the robot’s system. KUKA KR 16 is use to study optimal energy consumption and analyze PTP and Linear motion. The energy performance is measures with respect to two categories of movements known as Default and Optimal movement which do the same task repetitively within specific time. The result show that PTP motion consumed 6% more energy than Linear motion but completed 773 cycles within one hour whereas Linear motion only completed 492 cycles. Energy performance between Default and Optimal movement shows that Optimal movement recorded 21.8% less energy usage when compared to Default movement although the total cycles completed for both movement almost the same

Kinematics and Robot Design I, KaRD2018

This volume collects the papers published on the Special Issue “Kinematics and Robot Design I, KaRD2018” (https://www.mdpi.com/journal/robotics/special_issues/KARD), which is the first issue of the KaRD Special Issue series, hosted by the open access journal “MDPI Robotics”. The KaRD series aims at creating an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2018 received 22 papers and, after the peer-review process, accepted only 14 papers. The accepted papers cover some theoretical and many design/applicative aspects