Radar-on-Lidar: metric radar localization on prior lidar maps

Radar and lidar, provided by two different range sensors, each has pros and cons of various perception tasks on mobile robots or autonomous driving. In this paper, a Monte Carlo system is used to localize the robot with a rotating radar sensor on 2D lidar maps. We first train a conditional generative adversarial network to transfer raw radar data to lidar data, and achieve reliable radar points from generator. Then an efficient radar odometry is included in the Monte Carlo system. Combining the initial guess from odometry, a measurement model is proposed to match the radar data and prior lidar maps for final 2D positioning. We demonstrate the effectiveness of the proposed localization framework on the public multi-session dataset. The experimental results show that our system can achieve high accuracy for long-term localization in outdoor scenes

Localization Algorithms for GNSS-denied and Challenging Environments

In this dissertation, the problem about localization in GNSS-denied and challenging environments is addressed. Specifically, the challenging environments discussed in this dissertation include two different types, environments including only low-resolution features and environments containing moving objects. To achieve accurate pose estimates, the errors are always bounded through matching observations from sensors with surrounding environments. These challenging environments, unfortunately, would bring troubles into matching related methods, such as fingerprint matching, and ICP. For instance, in environments with low-resolution features, the on-board sensor measurements could match to multiple positions on a map, which creates ambiguity; in environments with moving objects included, the accuracy of the estimated localization is affected by the moving objects when performing matching. In this dissertation, two sensor fusion based strategies are proposed to solve localization problems with respect to these two types of challenging environments, respectively. For environments with only low-resolution features, such as flying over sea or desert, a multi-agent localization algorithm using pairwise communication with ranging and magnetic anomaly measurements is proposed in this dissertation. A scalable framework is then presented to extend the multi-agent localization algorithm to be suitable for a large group of agents (e.g., 128 agents) through applying CI algorithm. The simulation results show that the proposed algorithm is able to deal with large group sizes, achieve 10 meters level localization performance with 180 km traveling distance, while under restrictive communication constraints. For environments including moving objects, lidar-inertial-based solutions are proposed and tested in this dissertation. Inspired by the CI algorithm presented above, a potential solution using multiple features motions estimate and tracking is analyzed. In order to improve the performance and effectiveness of the potential solution, a lidar-inertial based SLAM algorithm is then proposed. In this method, an efficient tightly-coupled iterated Kalman filter with a build-in dynamic object filter is designed as the front-end of the SLAM algorithm, and the factor graph strategy using a scan context technology as the loop closure detection is utilized as the back-end. The performance of the proposed lidar-inertial based SLAM algorithm is evaluated with several data sets collected in environments including moving objects, and compared with the state-of-the-art lidar-inertial based SLAM algorithms

Mapping, planning and exploration with Pose SLAM

This thesis reports research on mapping, path planning, and autonomous exploration. These are classical problems in robotics, typically studied independently, and here we link such problems by framing them within a common SLAM approach, adopting Pose SLAM as the basic state estimation machinery. The main contribution of this thesis is an approach that allows a mobile robot to plan a path using the map it builds with Pose SLAM and to select the appropriate actions to autonomously construct this map. Pose SLAM is the variant of SLAM where only the robot trajectory is estimated and where landmarks are only used to produce relative constraints between robot poses. In Pose SLAM, observations come in the form of relative-motion measurements between robot poses. With regards to extending the original Pose SLAM formulation, this thesis studies the computation of such measurements when they are obtained with stereo cameras and develops the appropriate noise propagation models for such case. Furthermore, the initial formulation of Pose SLAM assumes poses in SE(2) and in this thesis we extend this formulation to SE(3), parameterizing rotations either with Euler angles and quaternions. We also introduce a loop closure test that exploits the information from the filter using an independent measure of information content between poses. In the application domain, we present a technique to process the 3D volumetric maps obtained with this SLAM methodology, but with laser range scanning as the sensor modality, to derive traversability maps. Aside from these extensions to Pose SLAM, the core contribution of the thesis is an approach for path planning that exploits the modeled uncertainties in Pose SLAM to search for the path in the pose graph with the lowest accumulated robot pose uncertainty, i.e., the path that allows the robot to navigate to a given goal with the least probability of becoming lost. An added advantage of the proposed path planning approach is that since Pose SLAM is agnostic with respect to the sensor modalities used, it can be used in different environments and with different robots, and since the original pose graph may come from a previous mapping session, the paths stored in the map already satisfy constraints not easy modeled in the robot controller, such as the existence of restricted regions, or the right of way along paths. The proposed path planning methodology has been extensively tested both in simulation and with a real outdoor robot. Our path planning approach is adequate for scenarios where a robot is initially guided during map construction, but autonomous during execution. For other scenarios in which more autonomy is required, the robot should be able to explore the environment without any supervision. The second core contribution of this thesis is an autonomous exploration method that complements the aforementioned path planning strategy. The method selects the appropriate actions to drive the robot so as to maximize coverage and at the same time minimize localization and map uncertainties. An occupancy grid is maintained for the sole purpose of guaranteeing coverage. A significant advantage of the method is that since the grid is only computed to hypothesize entropy reduction of candidate map posteriors, it can be computed at a very coarse resolution since it is not used to maintain neither the robot localization estimate, nor the structure of the environment. Our technique evaluates two types of actions: exploratory actions and place revisiting actions. Action decisions are made based on entropy reduction estimates. By maintaining a Pose SLAM estimate at run time, the technique allows to replan trajectories online should significant change in the Pose SLAM estimate be detected. The proposed exploration strategy was tested in a common publicly available dataset comparing favorably against frontier based exploratio

Mapping, planning and exploration with Pose SLAM

This thesis reports research on mapping, path planning, and autonomous exploration. These are classical problems in robotics, typically studied independently, and here we link such problems by framing them within a common SLAM approach, adopting Pose SLAM as the basic state estimation machinery. The main contribution of this thesis is an approach that allows a mobile robot to plan a path using the map it builds with Pose SLAM and to select the appropriate actions to autonomously construct this map. Pose SLAM is the variant of SLAM where only the robot trajectory is estimated and where landmarks are only used to produce relative constraints between robot poses. In Pose SLAM, observations come in the form of relative-motion measurements between robot poses. With regards to extending the original Pose SLAM formulation, this thesis studies the computation of such measurements when they are obtained with stereo cameras and develops the appropriate noise propagation models for such case. Furthermore, the initial formulation of Pose SLAM assumes poses in SE(2) and in this thesis we extend this formulation to SE(3), parameterizing rotations either with Euler angles and quaternions. We also introduce a loop closure test that exploits the information from the filter using an independent measure of information content between poses. In the application domain, we present a technique to process the 3D volumetric maps obtained with this SLAM methodology, but with laser range scanning as the sensor modality, to derive traversability maps. Aside from these extensions to Pose SLAM, the core contribution of the thesis is an approach for path planning that exploits the modeled uncertainties in Pose SLAM to search for the path in the pose graph with the lowest accumulated robot pose uncertainty, i.e., the path that allows the robot to navigate to a given goal with the least probability of becoming lost. An added advantage of the proposed path planning approach is that since Pose SLAM is agnostic with respect to the sensor modalities used, it can be used in different environments and with different robots, and since the original pose graph may come from a previous mapping session, the paths stored in the map already satisfy constraints not easy modeled in the robot controller, such as the existence of restricted regions, or the right of way along paths. The proposed path planning methodology has been extensively tested both in simulation and with a real outdoor robot. Our path planning approach is adequate for scenarios where a robot is initially guided during map construction, but autonomous during execution. For other scenarios in which more autonomy is required, the robot should be able to explore the environment without any supervision. The second core contribution of this thesis is an autonomous exploration method that complements the aforementioned path planning strategy. The method selects the appropriate actions to drive the robot so as to maximize coverage and at the same time minimize localization and map uncertainties. An occupancy grid is maintained for the sole purpose of guaranteeing coverage. A significant advantage of the method is that since the grid is only computed to hypothesize entropy reduction of candidate map posteriors, it can be computed at a very coarse resolution since it is not used to maintain neither the robot localization estimate, nor the structure of the environment. Our technique evaluates two types of actions: exploratory actions and place revisiting actions. Action decisions are made based on entropy reduction estimates. By maintaining a Pose SLAM estimate at run time, the technique allows to replan trajectories online should significant change in the Pose SLAM estimate be detected. The proposed exploration strategy was tested in a common publicly available dataset comparing favorably against frontier based explorationPostprint (published version

DLL: Direct LIDAR Localization. A map-based localization approach for aerial robots

This paper presents DLL, a fast direct map-based localization technique using 3D LIDAR for its application to aerial robots. DLL implements a point cloud to map registration based on non-linear optimization of the distance of the points and the map, thus not requiring features, neither point correspondences. Given an initial pose, the method is able to track the pose of the robot by refining the predicted pose from odometry. Through benchmarks using real datasets and simulations, we show how the method performs much better than Monte-Carlo localization methods and achieves comparable precision to other optimization-based approaches but running one order of magnitude faster. The method is also robust under odometric errors. The approach has been implemented under the Robot Operating System (ROS), and it is publicly available.Comment: Accepted for IROS2021. Associated code can be downloaded from https://github.com/robotics-upo/dl

3D mapping and path planning from range data

This thesis reports research on mapping, terrain classification and path planning. These are classical problems in robotics, typically studied independently, and here we link such problems by framing them within a common proprioceptive modality, that of three-dimensional laser range scanning. The ultimate goal is to deliver navigation paths for challenging mobile robotics scenarios. For this reason we also deliver safe traversable regions from a previously computed globally consistent map. We first examine the problem of registering dense point clouds acquired at different instances in time. We contribute with a novel range registration mechanism for pairs of 3D range scans using point-to-point and point-to-line correspondences in a hierarchical correspondence search strategy. For the minimization we adopt a metric that takes into account not only the distance between corresponding points, but also the orientation of their relative reference frames. We also propose FaMSA, a fast technique for multi-scan point cloud alignment that takes advantage of the asserted point correspondences during sequential scan matching, using the point match history to speed up the computation of new scan matches. To properly propagate the model of the sensor noise and the scan matching, we employ first order error propagation, and to correct the error accumulation from local data alignment, we consider the probabilistic alignment of 3D point clouds using a delayed-state Extended Information Filter (EIF). In this thesis we adapt the Pose SLAM algorithm to the case of 3D range mapping, Pose SLAM is the variant of SLAM where only the robot trajectory is estimated and where sensor data is solely used to produce relative constraints between robot poses. These dense mapping techniques are tested in several scenarios acquired with our 3D sensors, producing impressively rich 3D environment models. The computed maps are then processed to identify traversable regions and to plan navigation sequences. In this thesis we present a pair of methods to attain high-level off-line classification of traversable areas, in which training data is acquired automatically from navigation sequences. Traversable features came from the robot footprint samples during manual robot motion, allowing us to capture terrain constrains not easy to model. Using only some of the traversed areas as positive training samples, our algorithms are tested in real scenarios to find the rest of the traversable terrain, and are compared with a naive parametric and some variants of the Support Vector Machine. Later, we contribute with a path planner that guarantees reachability at a desired robot pose with significantly lower computation time than competing alternatives. To search for the best path, our planner incrementally builds a tree using the A* algorithm, it includes a hybrid cost policy to efficiently expand the search tree, combining random sampling from the continuous space of kinematically feasible motion commands with a cost to goal metric that also takes into account the vehicle nonholonomic constraints. The planer also allows for node rewiring, and to speed up node search, our method includes heuristics that penalize node expansion near obstacles, and that limit the number of explored nodes. The method book-keeps visited cells in the configuration space, and disallows node expansion at those configurations in the first full iteration of the algorithm. We validate the proposed methods with experiments in extensive real scenarios from different very complex 3D outdoors environments, and compare it with other techniques such as the A*, RRT and RRT* algorithms.Esta tesis reporta investigación sobre el mapeo, clasificación de terreno y planificación de trayectorias. Estos son problemas clásicos en robótica los cuales generalmente se estudian de forma independiente, aquí se vinculan enmarcandolos con una modalidad propioceptiva común: un láser de rango 3D. El objetivo final es ofrecer trayectorias de navegación para escenarios complejos en el marco de la robótica móvil. Por esta razón también entregamos regiones transitables en un mapa global consistente calculado previamente. Primero examinamos el problema de registro de nubes de puntos adquiridas en diferentes instancias de tiempo. Contribuimos con un novedoso mecanismo de registro de pares de imagenes de rango 3D usando correspondencias punto a punto y punto a línea, en una estrategia de búsqueda de correspondencias jerárquica. Para la minimización optamos por una metrica que considera no sólo la distancia entre puntos, sino también la orientación de los marcos de referencia relativos. También proponemos FAMSA, una técnica para el registro rápido simultaneo de multiples nubes de puntos, la cual aprovecha las correspondencias de puntos obtenidas durante el registro secuencial, usando inicialmente la historia de correspondencias para acelerar el cálculo de las correspondecias en los nuevos registros de imagenes. Para propagar adecuadamente el modelo del ruido del sensor y del registro de imagenes, empleamos la propagación de error de primer orden, y para corregir el error acumulado del registro local, consideramos la alineación probabilística de nubes de puntos 3D utilizando un Filtro Extendido de Información de estados retrasados. En esta tesis adaptamos el algóritmo Pose SLAM para el caso de mapas con imagenes de rango 3D, Pose SLAM es la variante de SLAM donde solamente se estima la trayectoria del robot, usando los datos del sensor como restricciones relativas entre las poses robot. Estas técnicas de mapeo se prueban en varios escenarios adquiridos con nuestros sensores 3D produciendo modelos 3D impresionantes. Los mapas obtenidos se procesan para identificar regiones navegables y para planificar secuencias de navegación. Presentamos un par de métodos para lograr la clasificación de zonas transitables fuera de línea. Los datos de entrenamiento se adquieren de forma automática usando secuencias de navegación obtenidas manualmente. Las características transitables se captan de las huella de la trayectoria del robot, lo cual permite capturar restricciones del terreno difíciles de modelar. Con sólo algunas de las zonas transitables como muestras de entrenamiento positivo, nuestros algoritmos se prueban en escenarios reales para encontrar el resto del terreno transitable. Los algoritmos se comparan con algunas variantes de la máquina de soporte de vectores (SVM) y una parametrizacion ingenua. También, contribuimos con un planificador de trayectorias que garantiza llegar a una posicion deseada del robot en significante menor tiempo de cálculo a otras alternativas. Para buscar el mejor camino, nuestro planificador emplea un arbol de busqueda incremental basado en el algoritmo A*. Incluimos una póliza de coste híbrido para crecer de manera eficiente el árbol, combinando el muestro aleatorio del espacio continuo de comandos cinemáticos del robot con una métrica de coste al objetivo que también concidera las cinemática del robot. El planificador además permite reconectado de nodos, y, para acelerar la búsqueda de nodos, se incluye una heurística que penaliza la expansión de nodos cerca de los obstáculos, que limita el número de nodos explorados. El método conoce las céldas que ha visitado del espacio de configuraciones, evitando la expansión de nodos en configuraciones que han sido vistadas en la primera iteración completa del algoritmo. Los métodos propuestos se validán con amplios experimentos con escenarios reales en diferentes entornos exteriores, asi como su comparación con otras técnicas como los algoritmos A*, RRT y RRT*.Postprint (published version