Hollow-Core Photonic Crystal Fiber Mach–Zehnder Interferometer for Gas Sensing

A novel and compact interferometric refractive index (RI) point sensor is developed using hollow-core photonic crystal fiber (HC-PCF) and experimentally demonstrated for high sensitivity detection and measurement of pure gases. To construct the device, the sensing element fiber (HC-PCF) was placed between two single-mode fibers with airgaps at each side. Great measurement repeatability was shown in the cyclic test for the detection of various gases. The RI sensitivity of 4629 nm/RIU was demonstrated in the RI range of 1.0000347–1.000436 for the sensor with an HC-PCF length of 3.3 mm. The sensitivity of the proposed Mach–Zehnder interferometer (MZI) sensor increases when the length of the sensing element decreases. It is shown that response and recovery times of the proposed sensor inversely change with the length of HC-PCF. Besides, spatial frequency analysis for a wide range of air-gaps revealed information on the number and power distribution of modes. It is shown that the power is mainly carried by two dominant modes in the proposed structure. The proposed sensors have the potential to improve current technology’s ability to detect and quantify pure gases

Development of Photonic Crystal Fiber Based Gas/ Chemical Sensors

The development of highly-sensitive and miniaturized sensors that capable of real-time analytes detection is highly desirable. Nowadays, toxic or colorless gas detection, air pollution monitoring, harmful chemical, pressure, strain, humidity, and temperature sensors based on photonic crystal fiber (PCF) are increasing rapidly due to its compact structure, fast response and efficient light controlling capabilities. The propagating light through the PCF can be controlled by varying the structural parameters and core-cladding materials, as a result, evanescent field can be enhanced significantly which is the main component of the PCF based gas/chemical sensors. The aim of this chapter is to (1) describe the principle operation of PCF based gas/ chemical sensors, (2) discuss the important PCF properties for optical sensors, (3) extensively discuss the different types of microstructured optical fiber based gas/ chemical sensors, (4) study the effects of different core-cladding shapes, and fiber background materials on sensing performance, and (5) highlight the main challenges of PCF based gas/ chemical sensors and possible solutions

Frequency Stabilization of DFB Laser Diodes at 1572 nm for Spaceborne Lidar Measurements of CO2

We report a fiber-based, pulsed laser seeder system that rapidly switches among 6 wavelengths across atmospheric carbon dioxide (CO2) absorption line near 1572.3 nm for measurements of global CO2 mixing ratios to 1-ppmv precision. One master DFB laser diode has been frequency-locked to the CO2 line center using a frequency modulation technique, suppressing its peak-to-peak frequency drifts to 0.3 MHz at 0.8 sec averaging time over 72 hours. Four online DFB laser diodes have been offset-locked to the master laser using phase locked loops, with virtually the same sub-MHz absolute accuracy. The 6 lasers were externally modulated and then combined to produce the measurement pulse train

Fiber Optic Sensors in Chemical and Biological Applications

The Special Issue "Fiber Optic Sensors in Chemical and Biological Applications” gathers recent original papers. The subjects of the papers cover a broad range of optical fiber chemical sensors and biosensors applied for regulation in bioreactors, to novel concepts of intrinsic optical fiber sensors

Photonic crystal fibers for sensing applications

Photonic crystal fibers are a kind of fiber optics that present a diversity of new and improved features beyond what conventional optical fibers can offer. Due to their unique geometric structure, photonic crystal fibers present special properties and capabilities that lead to an outstanding potential forsensing applications. A review of photonic crystal fiber sensors is presented. Two different groups of sensors are detailed separately: physical and biochemical sensors, based on the sensor measured parameter. Several sensors have been reported until the date, and more are expected to be developed due to the remarkable characteristics such fibers can offer.The authors are grateful to the Spanish Government project TEC2010-20224-C02-01

Temperature and strain sensing utilizing fluorescence in erbium doped photonic crystal fiber

This thesis reports a research on the development of erbium-doped photonics crystal fiber (PCF) for simultaneous strain and temperature measurement. Particular focus is given to overcome the existing issue in conventional optical fiber sensor constructed with single mode fiber (SMF) which is dependent on the surrounding temperature. This behavior apparently will result in the incapability of distinguishing strain and temperature measurement. A new sensing scheme is proposed as an alternative technique that allows discrimination of strain and temperature measurement by utilizing the fluorescence of erbium-doped PCF. The erbium-doped PCF structure is modeled and simulated using COMSOL Multiphysics software to determine the main characteristics of the PCF in terms of the effective refractive index and confinement loss. The erbium-doped PCF sensor is developed based on a manual splicing recipe which consists of a short fusion time of 0.4 s, low power electric arc of 70 a.u, gap between PCF and SMF of 14.2 ^m and an axial offset position of 12.1 ^m. The proposed sensor scheme is developed based on two different interrogations which are the intensity-based interrogation and combination of intensity and wavelength-based incorporating FBG interrogation. Fluorescence ratio techniques are studied over a temperature range of 30-150 °C while the intensity/wavelength changes are studied over a strain range of 200-850 ^e. Both interrogations results are analyzed using matrix method for strain-temperature de-convolution. Intensity and wavelength-based interrogation shows further significant improvement in average temperature error of 0.0087 °C and average strain error of -14.7402 as compared to the conventional erbium-doped fiber. Thus, this sensor is capable of measuring a range of parameters and has potential in implementing discriminative strain and temperature sensing systems in the future

Optical fiber sensors based on microstructured optical fibers to detect gases and volatile organic compounds-A review

Since the first publications related to microstructured optical fibers (MOFs), the development of optical fiber sensors (OFS) based on them has attracted the interest of many research groups because of the market niches that can take advantage of their specific features. Due to their unique structure based on a certain distribution of air holes, MOFs are especially useful for sensing applications: on one hand, the increased coupling of guided modes into the cladding or the holes enhances significantly the interaction with sensing films deposited there; on the other hand, MOF air holes enhance the direct interaction between the light and the analytes that get into in these cavities. Consequently, the sensitivity when detecting liquids, gasses or volatile organic compounds (VOCs) is significantly improved. This paper is focused on the reported sensors that have been developed with MOFs which are applied to detection of gases and VOCs, highlighting the advantages that this type of fiber offers.This work was carried out with the financial support of MINECO (Spain) through TEC2016-79367-C2-2-R (AEI/FEDER, UE) as well as Public University of Navarre PhD grants program.This work was carried out with the financial support of MINECO (Spain) through TEC2016-79367-C2-2-R (AEI/FEDER, UE)

Tapered optical fibre sensors: current trends and future perspectives

The development of reliable, affordable and efficient sensors is a key step in providing tools for efficient monitoring of critical environmental parameters. This review focuses on the use of tapered optical fibres as an environmental sensing platform. Tapered fibres allow access to the evanescent wave of the propagating mode, which can be exploited to facilitate chemical sensing by spectroscopic evaluation of the medium surrounding the optical fibre, by measurement of the refractive index of the medium, or by coupling to other waveguides formed of chemically sensitive materials. In addition, the reduced diameter of the tapered section of the optical fibre can offer benefits when measuring physical parameters such as strain and temperature. A review of the basic sensing platforms implemented using tapered optical fibres and their application for development of fibre-optic physical, chemical and bio-sensors is presented