41 research outputs found
A low complexity distributed differential scheme based on orthogonal space time block coding for decode-and-forward wireless relay networks
This work proposes a new differential cooperative diversity scheme with high data rate and low decoding complexity using the decode-and-forward protocol. The proposed model does not require either differential encoding or channel state information at the source node, relay nodes, or destination node where the data sequence is directly transmitted and the differential detection method is applied at the relay nodes and the destination node. The proposed technique enjoys a low encoding and decoding complexity at the source node, the relay nodes, and the destination node. Furthermore, the performance of the proposed strategy is analyzed by computer simulations in quasi-static Rayleigh fading channel and using the decode-and-forward protocol. The simulation results show that the proposed differential technique outperforms the corresponding reference strategies
Efficient approaches to robust and cooperative wireless network design
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 181-200).In wireless networks, relaying and user cooperation offer several attractive benefits such as higher throughput, better power efficiency, and larger coverage. As a result, cooperative networks are regarded as one of the most promising enabling technologies able to meet the increasingly high rate demands and quality of service requirements in wireless networks. In this dissertation, we investigate the efficient design of cooperative wireless networks from the perspectives of robust resource allocation, wideband communications, and energy efficiency. Given that the primary resource to be allocated is the relay node's transmission power, we propose robust and efficient relay power allocation algorithms when the global channel state information is subject to uncertainty. In addition, we propose practical algorithms that do not require frequent tracking of the global channel state information. This work reveals that ignoring global channel state information uncertainties and solving the relay power optimization problems often lead to poor performance, highlighting the importance of robust algorithm designs in practical wireless networks. Wideband cooperative networks allow for both higher data rate and higher resistance to interference. Since the gains achieved by using cooperation come at the cost of higher node complexity and substantial coordination overhead, it is important to study practical low-complexity signaling and receiver schemes suitable for wideband networks. In particular, we consider transmitted-reference signaling schemes and provide a unified performance analysis in terms of bit error rate. Since wideband networks are expected to coexist with many existing narrowband systems, it is important to characterize the effect of narrowband interference. We further extend the performance analysis of transmitted-reference signaling schemes to include the effect of narrowband interference..(cont) Finally, we conclude by studying the benefits of cooperation in a wireless sensor network, which aims at detecting the presence or absence of a certain physical phenomenon of interest using geographically dispersed sensor nodes. We propose a consensus flooding protocol and analyze its average energy consumption. We investigate the tradeoff between the detection reliability and the energy efficiency when nodes are allowed to cooperate. By addressing the above design challenges, this dissertation will be useful for obtaining insight into the theory and application of cooperative networks in future communication systemsby Tony Q.S. Quek.Ph.D
Recommended from our members
Ultra-Wideband Relay Communication Systems
Impulse-radio ultra-wide-band (IR-UWB) signaling is a promising technique
for high-speed, short-range relay communications networks. Depending on how
the relay node retransmits the signal, there are two main relay schemes: conventional
one-directional (one-way) relay model, and bi-directional (two-way) relay
model. In bi-directional relay communications, wireless network coding (WNC),
also called physical-layer network coding (PNC), could be applied to overcome
the spectral efficiency limitation of the conventional one-way relay.
In the first part of this work, we propose asynchronous, differential, and
bidirectional decode and forward (ADBDF) and asynchronous, differential, and
bidirectional denoise and forward (ADBDNF) UWB relay methods, where the
relay node (RN) does not need to be synchronized with the end nodes (ENs). The
proposed schemes are attractive for networks in which stringent/complicated
synchronization between the RN and the ENs may not be feasible.
The second part of this work focuses on UWB channel classification. We propose
a 2-dimensional (2-D) LOS/NLOS classification scheme that uses skewness of the channel impulse/pulse response. The proposed channel classification decreases
the complexity of existing channel classification methods and can be used
in a variety of areas such as localization, relay communications, and cooperative
communications.
The final part of this work deals with compressive sensing (CS) algorithms
that employ sub-Nyquist sampling for UWB communications. We develop coarse
graining (CG) for the proposed CS sub-Nyquist sampling technique, which leads
to: (1) reduced sampling rate at the receiver, and hence reduced use of analog-to-digital
converters (ADCs) resources; and (2) low-complexity channel estimation
Ultra Wideband
Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations
Étude et positionnement utilisant le réseau de capteur sans fil dans un environnement minier souterrain
La sécurité et la communication posent des problèmes majeurs auxquels il faut remédier dans les environnements hostiles comme les mines souterraines. Pour une communication fiable ainsi que pour tracer la position exacte d’un objet dans les mines souterraines, différentes technologies ont été déployé. Parmi ces dernières, le réseau de capteurs sans fil est considéré comme un outil prometteur pour les applications basées sur la localisation, à savoir, la surveillance des lieux, le repérage des mobiles et la navigation. En fait, les réseaux de capteur sans-fil fournissent une couverture d’une vaste gamme d’équipements fiables, efficaces, tolérants aux défaillances et évolutives. Cependant, les travaux de recherches précédents ont divisé la localisation en deux parties: les méthodes basées sur la portée et celles non-basées sur la portée. Où la première est précise et coûteuse tandis que la deuxième est présentée pour réduire la quantité d’énergie consommée du côté capteur dont les ressources sont limitées. Notre recherche se focalise sur la localisation basée sur la portée utilisant le réseau de capteurs sans fil dans les milieux internes et mines souterrains. Plusieurs techniques ont été proposées pour la localisation comme la réception de l'indicateur de force de signal (RSSI), le temps d'arrivée (TOA), la différence de temps d'arrivée (TDOA), l'angle d'arrivée (AOA). Bien que plusieurs travaux de recherches utilisant ces techniques aient été exécutés, l'approche de localisation à base de temps pour les environnements complexe comme la mine souterraine demeure limitée. Cette thèse offre de nouvelles solutions pour combler l’écart entre la localisation à base de temps et le réseau de capteurs sans fil à haute précision, pour l’environnement minier souterrain. De plus, nous avons utilisé une technologie émergente, à savoir les communications ultra-large bande, pour booster la performance et l'exactitude. Notre travail de recherche est subdivisé en deux principales parties : une partie simulation et une partie pratique. Dans la première, nous avons utilisé MATLAB pour faire les différentes simulations. La deuxième partie consiste en plusieurs mesures pratiques réalisées dans un environnement intérieur ainsi que dans une mine souterraine. Les résultats montrent une amélioration remarquable et une meilleure précision de la technique UWB à base de temps
Multiuser non coherent massive MIMO schemes based on DPSK for future communication systems
The explosive usage of rich multimedia content in wireless devices has overloaded the
communication networks. Moreover, the fifth generation (5G) of wireless communications
involves new requirements in the radio access network (RAN) which require higher network
capacities and new capabilities such as ultra-reliable and low-latency communication
(URLLC), vehicular communications or augmented reality. All this has encouraged a remarkable
spectrum crisis in the RF bands. A need for searching alternative techniques
with more spectral efficiency to accommodate the needs of future emerging wireless communications
is emerging. In this context, massive MIMO (m-MIMO) systems have been
proposed as a promising solution for providing a substantial increase in the network capacity,
becoming one of the key enabling technologies for 5G and beyond. m-MIMO
provides high spectral- and energy-efficiency thanks to the deployment of a large number
of antennas at the BS. However, we have to take into account that the current communication
technologies are based on coherent transmission techniques so far, which require
the transmission of a huge amount of signaling. This drawback is escalating with the
excessive available number of antennas in m-MIMO. Therefore, the differential encoding
and non coherent (NC) detection are an alternative solution to circumvent the drawbacks
of m-MIMO in coherent systems. This Ph.D. Thesis is focused on signal processing
techniques for NC detection in conjunction with m-MIMO, proposing new constellation
designs and NC detection algorithms, where the information is transmitted in the signal
differential phase.
First, we design new constellation schemes for an uplink multiuser NC m-MIMO system
in Rayleigh fading channels. These designs allow us to separate the users' signals
at the receiver thanks to a one-to-one correspondence between the constellation for each
user and the received joint constellation. Two approaches are considered in terms of BER:
each user achieves a different performance and, on the other hand, the same performance
is provided for all users. We analyze the number of antennas needed for those designs
and compare to the required number by other designs in the literature. It is shown that
our designs based on DPSK require a lower number of antennas than that required by
their counterpart schemes based on energy. In addition, we compare the performance to
their coherent counterpart systems, resulting NC-m-MIMO based on DPSK capable of
outperforming the coherent systems with the suitable designs.
Second, in order to reduce the number of antennas required for a target performance
we propose a multi-user bit interleaved coded modulation - iterative decoding (BICM-ID) scheme as channel coding for a NC-m-MIMO system based on DPSK. We propose a novel
NC approach for calculating EXIT curves based on the number of antennas. Then using
the EXIT chart we find the best channel coding scheme for our NC-m-MIMO proposal.
We show that the number of users served by the BS can be increased with a 70% reduction
in the number of antennas with respect to the case without channel coding. In particular,
we show that with 100 antennas for error protection equal design for all users and a coding
rate of 1/2 we achieve the minimum probability of error.
Third, we consider that current scenarios such as backhaul wireless systems, rural
or suburban environments, and even new device-to-device (D2D) communications or the
communications in higher frequencies (millimeter and the emerging ones in terahertz frequencies)
can have a predominant line-of-sight (LOS) component, modeled by Rician
fading. For all these new possible scenarios in 5G, we analyze the behavior of the NC
m-MIMO systems when we have a Rician fading. We present a new constellation design
to overcome the problem of the LOS channel component, as well as an associated detection
algorithm to separate each user in reception taking into account the characterization
of the constellation. In addition, for contemplating a more realistic scenario, we propose
grouping users which experience a Rayleigh fading with those with Rician fading, analyzing
the SINR and the performance of such combination in a multi-user NC m-MIMO
system based on M-DPSK. The adequate user grouping allows unifying the constellation
for both groups of users and the detection algorithm, reducing the complexity of the
receiver. Also, the number of users that may be multiplexed may be further increased
thanks to the improved performance.
In the fourth part of this Thesis, we analyse the performance of multi-user NC m-
MIMO based on DPSK in real environments and practical channels defined for the current
standards such as LTE, the future technologies such as 5G and even for communications
in the terahertz band. For this purpose, we use a metric to model the time-varying characteristics
of the practical channels. We employ again the EXIT charts tool for analyzing
and designing iteratively decoded systems. This analysis allows us to obtain an estimate
of the degradation of the system's performance imposed by realistic channels. Hence, we
show that our proposed system is robust to temporal variations, thus it is more recommendable
the employment of NC-m-MIMO-DPSK in the future communication standards
such as 5G. In order to reduce he number of hardware resources required in terms of RF
chains, facilitating its implementation in a real system, we propose incorporating differential
spatial modulation (DSM). We present and analyze a novel multiuser scheme for
NC-m-MIMO combined with DSM with which we can see that the number of antennas
is not a
affected by the incorporation of DSM, even we have an improvement on the
performance with respect to the coherent case.
Finally, we study the viability of multiplexing users by constellation schemes against
classical multiplexing techniques such as time division multiple access (TDMA). In order
to fully characterize the system performance we analyze the block error rate (BLER)
and the throughput of a NC-m-MIMO system. The results show a significant advantage
regarding the number of antennas for multiplexing in the constellation against TDMA.
However, in some cases, the demodulation of multiple users in constellation could require
an excessively large number of antennas compared to TDMA. Therefore, it is necessary to
properly manage the tradeoff
between throughout and the number of antennas, to reach
an optimal operational point, as shown in this Thesis.El inmenso uso de contenido multimedia en los dispositivos inalámbricos ha sobrecargado
las redes de comunicaciones. Además, la quinta generación (5G) de sistemas de
comunicaciones demanda nuevos requisitos para la red de acceso radio, la cual requiere
ofrecer capacidades de red mayores y nuevas funcionalidades como comunicaciones ultra
fiables y con muy poca letancia (URLLC), comunicaciones vehiculares o aplicaciones
como la realidad aumentada. Todo esto ha propiciado una crisis notable en el espectro
electromagnético, lo que ha llevado a una necesidad por buscar técnicas alternativas con
más eficiencia espectral para acomodar todos los requisitos de las tecnologÃas de comunicaciones
emergentes y futuras. En este contexto, los sistemas multi antena masivos,
conocidos como massive MIMO, m-MIMO, han sido propuestos como una solución prometedora
que proporciona un incremento substancial de la capacidad de red, convirtiéndose
en una de las tecnologÃas claves para el 5G. Los sistemas m-MIMO elevan enormemente el
número de antenas en la estación base, lo que les permite ofrecer alta eficiencia espectral
y energética. No obstante, tenemos que tener en cuenta que las actuales tecnologÃas de comunicaciones
emplean técnicas coherentes, las cuales requieren de información del estado
del canal y por ello la transmisión de una enorme cantidad de información de señalización.
Este inconveniente se ve agravado en el caso del m-MIMO debido al enorme número de
antenas. Por ello, la codificación diferencial y la detección no coherente (NC) son una
solución alternativa para solventar el problema de m-MIMO en los sistemas coherentes.
Esta Tesis se centra en las técnicas de procesado de señal para detección NC junto con
m-MIMO, proponiendo nuevos esquemas de constelación y algoritmos de detección NC,
donde la información sea transmitida en la diferencia de fase de la señal.
Primero, diseñamos nuevas constelaciones para un sistema multi usuario NC en m-
MIMO en enlace ascendente (uplink) en canales con desvanecimiento tipo Rayleigh. Estos
diseños nos permiten separar las señales de los usuarios en el receptor gracias a la correspondencia
unÃvoca entre la constelación de cada usuario individual y la constelación
conjunta recibida en la estación base. Hemos considerado dos enfoques para el diseño en
términos de probabilidad de error: cada usuario consigue un rendimiento distinto, mientras
que por otro lado, todos los usuarios son capaces de recibir las mismas prestaciones
de probabilidad de error. Analizamos el número de antenas necesario para estos diseños y
comparamos con el número requerido por otros diseños propuestos en la literatura. Nuestro
diseño basado en DPSK requiere un número menor de antenas comparado con los
sistemas basados en detección de energÃa. También comparamos con su homólogo coherente, resultando que NC-m-MIMO basado en DPSK es capaz de superar a los sistemas
coherentes con los diseños adecuados.
En segundo lugar, para reducir el número de antenas requerido para un rendimiento
dado, proponemos incluir un esquema de codificación de canal. Hemos optado por un
esquema de modulación codificado por bit entrelazado y decodificación iterativa (BICMID).
Hemos empleado la herramienta EXIT chart para el diseño de la codificación de canal,
proponiendo un nuevo enfoque para calcular las curvas EXIT de forma NC y basadas en
el número de antenas. Los resultados muestran que el número de usuarios servidos por
la estación base puede ser incrementado reduciendo un 70% el número de antenas con
respecto al caso sin codificación de canal. En particular, para un array de 100 antenas
y un diseño que ofrezca iguales prestaciones a todos los usuarios, con un código de tasa
1=2, podemos conseguir la mÃnima probabilidad de error.
En tercer lugar, consideramos escenarios donde el canal tenga una componente predominante
de visión directa (LOS) con la estación base modelada mediante un desvanecimiento
tipo Rician. Por ejemplo, sistemas inalámbricos de backhaul, entornos rurales
o sub urbanos, comunicaciones entre dispositivos (D2D), también cuando nos movemos
hacia frecuencias superiores como son en la banda de milimétricas o más recientemente,
la banda de terahercios para buscar mayores anchos de banda. Todos estos escenarios
están contemplados en el futuro 5G. Los diseños presentados para canales Rayleigh ya no
son válidos debido a la componente LOS del canal, por ello presentamos un nuevo diseño de constelación que resuelve el problema de la componente LOS, asà como una guÃa para
diseñar nuevas constelaciones. También proponemos un algoritmo asociado al diseñno de
la constelación para poder separar a los usuarios en recepción. Además, para contemplar
un escenario más realista donde podamos encontrar tanto desvanecimiento Rayleigh como
Rice, proponemos agrupar usuarios de ambos grupos, analizando su rendimiento y relación
señal a interferencia en la combinación. El adecuado agrupamiento permite unificar el
diseño de la constelación para ambos desvanecimientos y por tanto reducir la complejidad
en el receptor. También, el número de usuarios multiplicados en la constelación podrÃa
ser incrementado, gracias a la mejora en el rendimiento.
El cuarto módulo de esta tesis es dedicado a analizar el rendimiento de los diseños
propuestos en presencia de canales reales, donde disponemos de variabilidad temporal y en
frecuencia. Proponemos usar una métrica que modela las caracterÃsticas de la variabilidad
temporal y, usando de nuevo la herramienta EXIT, analizamos los sistemas decodificados
iterativamente considerando ahora los parámetros prácticos del canal. Este análisis nos
permite obtener una estimación de la degradación que sufre el rendimiento del sistema
impuesto por canales reales. Los resultados muestran que los sistemas NC-m-MIMO basados
en DPSK son muy robustos a la variabilidad temporal por lo que son recomendables
para los nuevos escenarios propuestos por el 5G, donde el canal cambia rápidamente.
Otra consideración para introducir los sistemas NC con m-MIMO es la problemática
de necesitar muchas cadenas de radio frecuencia que llevarÃan a tamaños de dispositivos
enormes. Para reducir este número se propone la modulación espacial. En esta Tesis,
estudiamos su uso con los sistemas NC, proponiendo una solución de modulación espacial
diferencial para esquemas con múltiples usuarios combinado con NC-m-MIMO.
Finalmente, estudiamos la viabilidad de multiplexar usuarios en la constelación frente
a usar técnicas clásicas de multiplexación como TDMA. Para caracterizar completamente
el rendimiento del sistema, analizamos la tasa de error de bloque (BLER) y el throughput
de un sistema NC-m-MIMO. Los resultados muestran una ventaja significativa en cuanto
al número de antennas para multiplexar usuarios en la constelación frente al requerido
por TDMA. No obstante, en algunos casos, la demodulación de múltiples usuarios en
la constelación podrÃa requerir un número de antennas excesivamente grande comparado
con la multiplexación en el tiempo. Por ello, es necesario gestionar adecuadamente un
balance entre el throughput y el número de antenas para alcanzar un punto operacional
óptimo, como se muestra en esta Tesis.Programa Oficial de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Ana Isabel Pérez Neira.- Secretario: Máximo Morales Céspedes.- Vocal: MarÃa del Carmen Aguayo Torre