Design and Analysis of Different Optical Attocells Deployment Models for Indoor Visible Light Communication System

Visible light communication (VLC) is a promising candidate that is expected to revolutionize indoor environment communications performance and fulfill fifth generation and beyond (5GB) technologies requirements. It offers high and free bandwidth, electromagnetic interference immunity, low-cost front end and low power consumption. Also, VLC has dual functions that could be utilized in both illumination and communication concurrently. The number of optical attocells (OAs) and their deployment in the room represent the main issue that should be taken into consideration in designing an optimal VLC system. In this paper, we have introduced a new model of five OAs in the typical room. In addition to an investigation of various optical attocells (OAs) deployment models, in which a multi-variable evaluation was performed in terms of received power, illumination, SNR and RMS delay spread in order to determine the optimal OAs model. Also, various modulation schemes performances were investigated which included NRZ-OOK, BPSK, and QPSK in order to improve the BER performance. Results indicated that BPSK modulation had superior BER performance when compared with all OAs models. Further, a comprehensive results analysis and comparison of all proposed models was conducted over various parameters, in which our new proposed OAs model achieved an optimal performance in comparison with the other models

Design and analysis of different optical attocells deployment models for indoor visible light communication system

Visible light communication (VLC) is a promising candidate that is expected to revolutionize indoor environment communications performance and fulfill fifth generation and beyond (5GB) technologies requirements. It offers high and free bandwidth, electromagnetic interference immunity, low-cost front end and low power consumption. Also, VLC has dual functions that could be utilized in both illumination and communication concurrently. The number of optical attocells (OAs) and their deployment in the room represent the main issue that should be taken into consideration in designing an optimal VLC system. In this paper, we have introduced a new model of five OAs in the typical room. In addition to an investigation of various optical attocells (OAs) deployment models, in which a multi-variable evaluation was performed in terms of received power, illumination, SNR and RMS delay spread in order to determine the optimal OAs model. Also, various modulation schemes performances were investigated which included NRZ-OOK, BPSK, and QPSK in order to improve the BER performance. Results indicated that BPSK modulation had superior BER performance when compared with all OAs models. Further, a comprehensive results analysis and comparison of all proposed models was conducted over various parameters, in which our new proposed OAs model achieved an optimal performance in comparison with the other models

A Deep Learning Approach to Universal Binary Visible Light Communication Transceiver

This paper studies a deep learning (DL) framework for the design of binary modulated visible light communication (VLC) transceiver with universal dimming support. The dimming control for the optical binary signal boils down to a combinatorial codebook design so that the average Hamming weight of binary codewords matches with arbitrary dimming target. An unsupervised DL technique is employed for obtaining a neural network to replace the encoder-decoder pair that recovers the message from the optically transmitted signal. In such a task, a novel stochastic binarization method is developed to generate the set of binary codewords from continuous-valued neural network outputs. For universal support of arbitrary dimming target, the DL-based VLC transceiver is trained with multiple dimming constraints, which turns out to be a constrained training optimization that is very challenging to handle with existing DL methods. We develop a new training algorithm that addresses the dimming constraints through a dual formulation of the optimization. Based on the developed algorithm, the resulting VLC transceiver can be optimized via the end-to-end training procedure. Numerical results verify that the proposed codebook outperforms theoretically best constant weight codebooks under various VLC setups.Comment: to appear in IEEE Trans. Wireless Commu

Electronics and Its Worldwide Research

The contributions of researchers at a global level in the journal Electronics in the period 2012–2020 are analyzed. The objective of this work is to establish a global vision of the issues published in the Electronic magazine and their importance, advances and developments that have been particularly relevant for subsequent research. The magazine has 15 thematic sections and a general one, with the programming of 385 special issues for 2020–2021. Using the Scopus database and bibliometric techniques, 2310 documents are obtained and distributed in 14 thematic communities. The communities that contribute to the greatest number of works are Power Electronics (20.13%), Embedded Computer Systems (13.59%) and Internet of Things and Machine Learning Systems (8.11%). A study of the publications by authors, affiliations, countries as well as the H index was undertaken. The 7561 authors analyzed are distributed in 87 countries, with China being the country of the majority (2407 authors), followed by South Korea (763 authors). The H-index of most authors (75.89%) ranges from 0 to 9, where the authors with the highest H-Index are from the United States, Denmark, Italy and India. The main publication format is the article (92.16%) and the review (5.84%). The magazine publishes topics in continuous development that will be further investigated and published in the near future in fields as varied as the transport sector, energy systems, the development of new broadband semiconductors, new modulation and control techniques, and more

Indoor Visible Light Communication:A Tutorial and Survey

Abstract With the advancement of solid-state devices for lighting, illumination is on the verge of being completely restructured. This revolution comes with numerous advantages and viable opportunities that can transform the world of wireless communications for the better. Solid-state LEDs are rapidly replacing the contemporary incandescent and fluorescent lamps. In addition to their high energy efficiency, LEDs are desirable for their low heat generation, long lifespan, and their capability to switch on and off at an extremely high rate. The ability of switching between different levels of luminous intensity at such a rate has enabled the inception of a new communication technology referred to as visible light communication (VLC). With this technology, the LED lamps are additionally being used for data transmission. This paper provides a tutorial and a survey of VLC in terms of the design, development, and evaluation techniques as well as current challenges and their envisioned solutions. The focus of this paper is mainly directed towards an indoor setup. An overview of VLC, theory of illumination, system receivers, system architecture, and ongoing developments are provided. We further provide some baseline simulation results to give a technical background on the performance of VLC systems. Moreover, we provide the potential of incorporating VLC techniques in the current and upcoming technologies such as fifth-generation (5G), beyond fifth-generation (B5G) wireless communication trends including sixth-generation (6G), and intelligent reflective surfaces (IRSs) among others

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system

High Speed Optical Wireless Communication Systems.

Visible light communication (VLC) systems have become promising candidates to complement conventional radio frequency (RF) systems due to the increasingly saturated RF spectrum and the potentially high data rates that can be achieved by VLC systems. Over the last decade, significant research efforts have been directed towards the development of VLC systems due to their numerous advantages over RF communication systems, such as the availability of simple transmitters (light emitting diodes, (LEDs)) and receivers (silicon photo detectors), better security at the physical layer, improved energy efficiency due to the dual functionally (i.e., illumination and communication) and hundreds of THz of license-free bandwidth. However, several challenges face VLC systems to achieve high data rates (multi gigabits per second). These challenges include the low modulation bandwidth of the LEDs, inter symbol interference (ISI) due to multipath propagation, co-channel interference (CCI) and the light unit (i.e., VLC transmitter) should be ‘‘ON’’ all the time to ensure continuous communication. This thesis investigates a number of techniques to design robust highspeed indoor VLC systems that support a single user and multi-users. Light engines composed of RYGB laser diodes (LDs) are used for communication and illumination. The main goal of using LDs is to enable the VLC system to achieve high data rates while using simple modulation techniques (such as on off keying (OOK)), which adds simplicity to VLC systems. Three VLC systems based on the computer generated holograms (CGHs) are proposed in this thesis, which are single beam static CGH-VLC system, static CGH-VLC system and adaptive CGH-VLC system. Whereas in the first and the second systems a single photodetector is used (added simplicity), an imaging receiver is used in the third one to obtain spatial multiplexing. We consider the lighting constraints where illumination should be at an acceptable level and should consider diffuse reflections (up to second order) to find the maximum data rate that can be offered by each system. In the first system, the CGH is used to produce one fixed broad beam from the best light unit and focus it to a specific area on the communication floor. In the second system, the CGH generates 100 beams (all these beams carry same data) from the best transmitter and directs these beams to an area of 2 m × 2 m on the communication floor. In the third system, the CGH is used to generate eight beams from the best transmitter and steer these beams to the receiver’s location. In addition, each one of these eight beams carries a different data stream. This thesis also presents an indoor VLC system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to reduce the effects of inter-symbol-interference (ISI). To distinguish between light units (transmitters) and to match the light units used (to convey the data) with the pixels of the imaging receiver, we proposed the use of subcarrier multiplexing (SCM) tones. Each light unit transmission is multiplexed with a unique tone. At the receiver, a SCM tone decision system is utilised to measure the power level of each SCM tone and consequently associate each pixel with a light unit. We proposed a high data rate single user VLC system based on wavelength division multiplexing (WDM) in this thesis. An imaging diversity receiver (IMDR) is used as an optical receiver. Based on the location of the IMDR, each colour of the RYGB LDs sends a different data stream at a different rate where the variable data rates are attributed mainly to the different power levels assigned to the colours to yield the desired white colour. Each pixel of the IMDR is covered by a specific colour optical filter. WDM in conjunction with the SCM tones are used to realise a high data rate multi-user VLC system in this thesis. The SCM tones are used to allocate an optimum transmitter to each user and to calculate the co-channel interference (CCI). Two novel optical receivers are used to evaluate the performance of the VLC systems: an array of non-imaging receivers (NI-R) and an array of non-imaging angle diversity receivers (NI-ADR). This thesis proposes a multi-branch transmitter (MBT) as a solution that can improve the VLC system performance over an indoor channel and support multi-user operation. The MBT has many transmitter branches (TBs) where each branch is directed to a specific area. By reducing the semi angle of each TB, the effect of multipath propagations is reduced and the received optical power is improved. The performance of the MBT is evaluated with a single user VLC system using a wide field of view (W-FOV) receiver and then with an angle diversity receiver (ADR). The results show that this system can provide a data rate of 4 Gb/s and 10 Gb/s when using wide FOV receiver and ADR, respectively. In addition, the performance of the MBT is evaluated in a multi-user scenario. We used the MBT with WDM and SCM tones to realise a high data rate multiuser indoor VLC system. Four colour laser diodes (RYGB LDs) are used as sources of illumination and data communication. One colour of these four colours is used to convey the SCM tones at the beginning of the connection to set up the connection. When the connection is set up, the data is transmitted in parallel through the RYGB LDs