On signalling over through-silicon via (TSV) interconnects in 3-D integrated circuits.

This paper discusses signal integrity (SI) issues and signalling techniques for Through Silicon Via (TSV) interconnects in 3-D Integrated Circuits (ICs). Field-solver extracted parasitics of TSVs have been employed in Spice simulations to investigate the effect of each parasitic component on performance metrics such as delay and crosstalk and identify a reduced-order electrical model that captures all relevant effects. We show that in dense TSV structures voltage-mode (VM) signalling does not lend itself to achieving high data-rates, and that current-mode (CM) signalling is more effective for high throughput signalling as well as jitter reduction. Data rates, energy consumption and coupled noise for the different signalling modes are extracted

Integrated Silicon Microwave and Millimeterwave Passive Components and Functions

Non

Programmable photonics : an opportunity for an accessible large-volume PIC ecosystem

We look at the opportunities presented by the new concepts of generic programmable photonic integrated circuits (PIC) to deploy photonics on a larger scale. Programmable PICs consist of waveguide meshes of tunable couplers and phase shifters that can be reconfigured in software to define diverse functions and arbitrary connectivity between the input and output ports. Off-the-shelf programmable PICs can dramatically shorten the development time and deployment costs of new photonic products, as they bypass the design-fabrication cycle of a custom PIC. These chips, which actually consist of an entire technology stack of photonics, electronics packaging and software, can potentially be manufactured cheaper and in larger volumes than application-specific PICs. We look into the technology requirements of these generic programmable PICs and discuss the economy of scale. Finally, we make a qualitative analysis of the possible application spaces where generic programmable PICs can play an enabling role, especially to companies who do not have an in-depth background in PIC technology

BiCMOS Millimetre-wave low-noise amplifier

Abstract: Please refer to full text to view abstract.D.Phil. (Electrical and Electronic Engineering

Mixed-Domain Fast Simulation of RF and Microwave MEMS-based Complex Networks within Standard IC Development Frameworks

MS technology (MicroElectroMechanical-System) has been successfully employed since a few decades in the sensors/actuators field. Several products available on the market nowadays include MEMS-based accelerometers and gyroscopes, pressure sensors and micro-mirrors matrices. Beside such well-established exploitation of MEMS technology, its use within RF (Radio Frequency) blocks and systems/sub-systems has been attracting, in recent years, the interest of the Scientific Community for the significant RF performances boosting that MEMS devices can enable. Several significant demonstrators of entirely MEMS-based lumped components, like variable capacitors (Hyung et al., 2008), inductors (Zine-El-Abidine et al., 2003) and micro-switches (Goldsmith et al., 1998), are reported in literature, exhibiting remarkable performance in terms of large tuning-range, very high Q-Factor and low-loss, if compared with the currently used components implemented in standard semiconductor technology (Etxeberria & Gracia, 2007, Rebeiz & Muldavin, 1999). Starting from the just mentioned basic lumped components, it is possible to synthesize entire functional sub-blocks for RF applications in MEMS technology. Also in this case, highly significant demonstrators are reported and discussed in literature concerning, for example, tuneable phase shifters (Topalli et al., 2008), switching matrices (Daneshmand & Mansour, 2007), reconfigurable impedance matching networks (Larcher et al., 2009) and power attenuators (Iannacci et al., 2009, a). In all the just listed cases, the good characteristics of RF-MEMS devices lead, on one side, to very highperformance networks and, on the other hand, to enabling a large reconfigurability of the entire RF/Microwave systems employing MEMS sub-blocks. In particular, the latter feature addresses two important points, namely, the reduction of hardware redundancy, being for instance the same Power Amplifier within a mobile phone suitable both in transmission (Tx) and reception (Rx) (De Los Santos, 2002), and the usability of the same RF apparatus in compliance with different communication standards (like GSM, UMTS, WLAN and so on) (Varadan, 2003). Beside the exploitation of MEMS technology within RF transceivers, other potentially successful uses of Microsystems are in the Microwave field, concerning, e.g., very compact switching units, especially appealing to satellite applications for the very reduced weight (Chung et al., 2007), and phase shifters in order to electronically steer short and mid-range radar systems for the homeland security and monitoring applications (Maciel et al., 2007). Given all the examples reported above, it is straightforward that the employment of a proper strategy in aiming at the RF-MEMS devices/networks optimum design is a key-issue in order to gain the best benefits, in terms of performance, that such technology enables to address. This is not an easy task as the behaviour of RF-MEMS transversally crosses different physical domains, namely, electrical, mechanical and electromagnetic, leading to a large number of trade-offs between mechanical and electrical/electromagnetic parameters, that typically cannot be managed within a unique commercial simulation tool. In this chapter, a complete approach for the fast simulation of single RF-MEMS devices as well as of complex networks is presented and discussed in details. The proposed method is based on a MEMS compact model library, previously developed by the author, within a commercial simulation environment for ICs (integrated circuits). Such software tool describes the electromechanical mixed-domain behaviour typical of MEMS devices. Moreover, through the chapter, the electromagnetic characteristics of RF-MEMS will be also addressed by means of extracted lumped element networks, enabling the whole electromechanical and electromagnetic design optimization of the RF-MEMS device or network of interest. In particular, significant examples about how to acc..

III-V Nanowire MOSFET High-Frequency Technology Platform

This thesis addresses the main challenges in using III-V nanowireMOSFETs for high-frequency applications by building a III-Vvertical nanowire MOSFET technology library. The initial devicelayout is designed, based on the assessment of the current III-V verticalnanowire MOSFET with state-of-the-art performance. The layout providesan option to scale device dimensions for the purpose of designing varioushigh-frequency circuits. The nanowire MOSFET device is described using1D transport theory, and modeled with a compact virtual source model.Device assessment is performed at high frequencies, where sidewall spaceroverlaps have been identified and mitigated in subsequent design iterations.In the final stage of the design, the device is simulated with fT > 500 GHz,and fmax > 700 GHz.Alongside the III-V vertical nanowire device technology platform, adedicated and adopted RF and mm-wave back-end-of-line (BEOL) hasbeen developed. Investigation into the transmission line parameters revealsa line attenuation of 0.5 dB/mm at 50 GHz, corresponding to state-ofthe-art values in many mm-wave integrated circuit technologies. Severalkey passive components have been characterized and modeled. The deviceinterface module - an interconnect via stack, is one of the prominentcomponents. Additionally, the approach is used to integrate ferroelectricMOS capacitors, in a unique setting where their ferroelectric behavior iscaptured at RF and mm-wave frequencies.Finally, circuits have been designed. A proof-of-concept circuit, designedand fabricated with III-V lateral nanowire MOSFETs and mm-wave BEOL, validates the accuracy of the BEOL models, and the circuit design. Thedevice scaling is shown to be reflected into circuit performance, in aunique device characterization through an amplifier noise-matched inputstage. Furthermore, vertical-nanowire-MOSFET-based circuits have beendesigned with passive feedback components that resonate with the devicegate-drain capacitance. The concept enables for device unilateralizationand gain boosting. The designed low-noise amplifiers have matching pointsindependent on the MOSFET gate length, based on capacitance balancebetween the intrinsic and extrinsic capacitance contributions, in a verticalgeometry. The proposed technology platform offers flexibility in device andcircuit design and provides novel III-V vertical nanowire MOSFET devicesand circuits as a viable option to future wireless communication systems

Investigating factors affecting photoconductive microwave switch performance using 3D em simulation

A series of 3D EM simulation models are presented in order to determine the effect that conductivity profile, passivation layer and connection method have on the transmission performance of a photoconductive microwave switch. The use of 3D EM simulation can help quantify the benefit and impact of different approaches before the manufacture stage. The aim is to find methods to reduce insertion loss of the switch to provide maximum efficiency when the device is integrated into reconfigurable applications. Results show improvement to the transmission is possible by altering passivation thickness and designing optical feed to maintain signal planarity

Multiphysics modelling of high-speed optoelectronic devices for silicon photonics platforms

L'abstract è presente nell'allegato / the abstract is in the attachmen