A synthesis of logic and biology in the design of dependable systems

The technologies of model-based design and dependability analysis in the design of dependable systems, including software intensive systems, have advanced in recent years. Much of this development can be attributed to the application of advances in formal logic and its application to fault forecasting and verification of systems. In parallel, work on bio-inspired technologies has shown potential for the evolutionary design of engineering systems via automated exploration of potentially large design spaces. We have not yet seen the emergence of a design paradigm that combines effectively and throughout the design lifecycle these two techniques which are schematically founded on the two pillars of formal logic and biology. Such a design paradigm would apply these techniques synergistically and systematically from the early stages of design to enable optimal refinement of new designs which can be driven effectively by dependability requirements. The paper sketches such a model-centric paradigm for the design of dependable systems that brings these technologies together to realise their combined potential benefits

A synthesis of logic and bio-inspired techniques in the design of dependable systems

Much of the development of model-based design and dependability analysis in the design of dependable systems, including software intensive systems, can be attributed to the application of advances in formal logic and its application to fault forecasting and verification of systems. In parallel, work on bio-inspired technologies has shown potential for the evolutionary design of engineering systems via automated exploration of potentially large design spaces. We have not yet seen the emergence of a design paradigm that effectively combines these two techniques, schematically founded on the two pillars of formal logic and biology, from the early stages of, and throughout, the design lifecycle. Such a design paradigm would apply these techniques synergistically and systematically to enable optimal refinement of new designs which can be driven effectively by dependability requirements. The paper sketches such a model-centric paradigm for the design of dependable systems, presented in the scope of the HiP-HOPS tool and technique, that brings these technologies together to realise their combined potential benefits. The paper begins by identifying current challenges in model-based safety assessment and then overviews the use of meta-heuristics at various stages of the design lifecycle covering topics that span from allocation of dependability requirements, through dependability analysis, to multi-objective optimisation of system architectures and maintenance schedules

Automated analysis of feature models: Quo vadis?

Feature models have been used since the 90's to describe software product lines as a way of reusing common parts in a family of software systems. In 2010, a systematic literature review was published summarizing the advances and settling the basis of the area of Automated Analysis of Feature Models (AAFM). From then on, different studies have applied the AAFM in different domains. In this paper, we provide an overview of the evolution of this field since 2010 by performing a systematic mapping study considering 423 primary sources. We found six different variability facets where the AAFM is being applied that define the tendencies: product configuration and derivation; testing and evolution; reverse engineering; multi-model variability-analysis; variability modelling and variability-intensive systems. We also confirmed that there is a lack of industrial evidence in most of the cases. Finally, we present where and when the papers have been published and who are the authors and institutions that are contributing to the field. We observed that the maturity is proven by the increment in the number of journals published along the years as well as the diversity of conferences and workshops where papers are published. We also suggest some synergies with other areas such as cloud or mobile computing among others that can motivate further research in the future.Ministerio de Economía y Competitividad TIN2015-70560-RJunta de Andalucía TIC-186

A systematic literature review on the semi-automatic configuration of extended product lines

Product line engineering has become essential in mass customisation given its ability to reduce production costs and time to market, and to improve product quality and customer satisfaction. In product line literature, mass customisation is known as product configuration. Currently, there are multiple heterogeneous contributions in the product line configuration domain. However, a secondary study that shows an overview of the progress, trends, and gaps faced by researchers in this domain is still missing. In this context, we provide a comprehensive systematic literature review to discover which approaches exist to support the configuration process of extended product lines and how these approaches perform in practice. Extend product lines consider non-functional properties in the product line modelling. We compare and classify a total of 66 primary studies from 2000 to 2016. Mainly, we give an in-depth view of techniques used by each work, how these techniques are evaluated and their main shortcomings. As main results, our review identified (i) the need to improve the quality of the evaluation of existing approaches, (ii) a lack of hybrid solutions to support multiple configuration constraints, and (iii) a need to improve scalability and performance conditions

Defining Categorical Reasoning of Numerical Feature Models with Feature-Wise and Variant-Wise Quality Attributes

Automatic analysis of variability is an important stage of Software Product Line (SPL) engineering. Incorporating quality information into this stage poses a significant challenge. However, quality-aware automated analysis tools are rare, mainly because in existing solutions variability and quality information are not unified under the same model. In this paper, we make use of the Quality Variability Model (QVM), based on Category Theory (CT), to redefine reasoning operations. We start defining and composing the six most commonoperations in SPL, but now as quality-based queries, which tend to be unavailable in other approaches. Consequently, QVM supports interactions between variant-wise and feature-wise quality attributes. As a proof of concept,we present, implement and execute the operations as lambda reasoning for CQL IDE – the state-of-theart CT tool.Munoz, Pinto and Fuentes work is supported by the European Union’s H2020 research and innovation programme under grant agreement DAEMON 101017109, by the projects co-financed by FEDER funds LEIA UMA18-FEDERJA-15, MEDEA RTI2018-099213-B-I00 and Rhea P18-FR-1081 and the PRE2019-087496 grant from the Ministerio de Ciencia e Innovación

Individually optimized commercial road transport: A decision support system for customizable routing problems

The Vehicle Routing Problem (VRP) in its manifold variants is widely discussed in scientific literature. We investigate related optimization models and solution methods to determine the state of research for vehicle routing attributes and their combinations. Most of these approaches are idealized and focus on single problem-tailored routing applications. Addressing this research gap, we present a customizable VRP for optimized road transportation embedded into a Decision Support System (DSS). It integrates various model attributes and handles a multitude of real-world routing problems. In the context of urban logistics, practitioners of different industries and researchers are assisted in efficient route planning that allows for minimizing driving distances and reducing vehicle emissions. Based on the design science research methodology, we evaluate the DSS with computational benchmarks and real-world simulations. Results indicate that our developed DSS can compete with problem-tailored algorithms. With our solution-oriented DSS as final artifact, we contribute to an enhanced economic and environmental sustainability in urban logistic applications

Image analysis and statistical modelling for measurement and quality assessment of ornamental horticulture crops in glasshouses

Image analysis for ornamental crops is discussed with examples from the bedding plant industry. Feed-forward artificial neural networks are used to segment top and side view images of three contrasting species of bedding plants. The segmented images provide objective measurements of leaf and flower cover, colour, uniformity and leaf canopy height. On each imaging occasion, each pack was scored for quality by an assessor panel and it is shown that image analysis can explain 88.5%, 81.7% and 70.4% of the panel quality scores for the three species, respectively. Stereoscopy for crop height and uniformity is outlined briefly. The methods discussed here could be used for crop grading at marketing or for monitoring and assessment of growing crops within a glasshouse during all stages of production

Clafer: Lightweight Modeling of Structure, Behaviour, and Variability

Embedded software is growing fast in size and complexity, leading to intimate mixture of complex architectures and complex control. Consequently, software specification requires modeling both structures and behaviour of systems. Unfortunately, existing languages do not integrate these aspects well, usually prioritizing one of them. It is common to develop a separate language for each of these facets. In this paper, we contribute Clafer: a small language that attempts to tackle this challenge. It combines rich structural modeling with state of the art behavioural formalisms. We are not aware of any other modeling language that seamlessly combines these facets common to system and software modeling. We show how Clafer, in a single unified syntax and semantics, allows capturing feature models (variability), component models, discrete control models (automata) and variability encompassing all these aspects. The language is built on top of first order logic with quantifiers over basic entities (for modeling structures) combined with linear temporal logic (for modeling behaviour). On top of this semantic foundation we build a simple but expressive syntax, enriched with carefully selected syntactic expansions that cover hierarchical modeling, associations, automata, scenarios, and Dwyer's property patterns. We evaluate Clafer using a power window case study, and comparing it against other notations that substantially overlap with its scope (SysML, AADL, Temporal OCL and Live Sequence Charts), discussing benefits and perils of using a single notation for the purpose

Comparative Analysis of Artificial Intelligence and Numerical Reservoir Simulation in Marcellus Shale Wells

This dissertation addresses the limitations of conventional numerical reservoir simulation techniques in the context of unconventional shale plays and proposes the use of data-driven artificial intelligence (AI) models as a promising alternative. Traditional methods, while providing valuable insights, often rely on simplifying assumptions and are constrained by time, resources, and data quality. The research leverages AI models to handle the complexities of shale behavior more effectively, facilitating accurate predictions and optimizations with less resource expenditure. Two specific methodologies are investigated for this purpose: traditional numerical reservoir simulations using Computer Modelling Group\u27s GEM reservoir simulation software, and an AI-based Shale Analytics approach using IMPROVE™ software from Intelligent Solutions, Inc. The investigation covers the impact of key parameters on production prediction, assumptions made, predictive accuracy, data requirements, workflow complexity, and time efficiency. By comparing these methods, the research aims to offer guidelines for incorporating AI models into reservoir simulation and identify areas for increased efficiency and accuracy. The study concludes by presenting recommendations to advance the field of reservoir simulation and encourage the adoption of innovative methodologies in the energy industry. The results are anticipated to considerably enhance reservoir simulation processes and optimize production strategies for unconventional shale plays