Circle grid fractal plate as a turbulent generator for premixed flame: an overview

This review paper focuses to ascertain a new approach in turbulence generation on the structure of premixed flames and external combustion using a fractal grid pattern. This review paper discusses the relationship between fractal pattern and turbulence flow. Many researchers have explored the fractal pattern as a new concept of turbulence generators, but researchers rarely study fractal turbulence generators on the structure premixed flame. The turbulent flow field characteristics have been studied tand investigated in a premixed combustion application. In terms of turbulence intensity, most researchers used fractal grid that can be tailored so that they can design the characteristic needed in premixed flame. This approach makes it extremely difficult to determine the exact turbulent burning velocity on the velocity fluctuation of the flow. The decision to carry out additional research on the effect circle grid fractal plate as a turbulent generator for premixed flame should depends on the blockage ratio and fractal pattern of the grid. 1

Different modeling technologies of hydraulic load simulator for thrust vector control actuator

Hydraulic simulators are extremely important in the flight control actuator system's verification process. Flexible nozzle has a number of specifics, comparing to other flight controls, because the load cannot be described, classically, by the hinge moment. Additionally, classical hydraulic simulator, in which the cylinder simulates the load, is not sufficient for performing a complete simulation of the real load. Building a mechanical pendulum, to which a hydraulic cylinder acts, and that rests on two elastic supports, enables simulation of additional phenomena that exist in flexible nozzle, but not in other control surfaces. Force from impulse that exists in reality, and which is impossible to be generated by standard hydraulic simulator, can be realized through the pendulum. This paper demonstrates that a simulator can be designed through modelling of the elastic load using bond graph, without a precise elaboration of direction of forces in elastic structure, just by observing, on energy level, the input of force in flexible structure over the point in which actuator force acts. Simulator with hydraulic cylinder is convenient to be used when there is a need for considering the risk of self-oscillation of flexible joint and nozzle, i.e. for defining the so-called notch filter. Then, the hydraulic cylinder of load simulator can generate the oscillation, frequency and amplitude that match this dynamic case of flexible nozzle actuator's load that is being reduced to its piston rod, without a risk of damaging the flexible structure that exists in the construction of a simulator with pendulum

Design and Test of an Automotive Clutch Actuation

This thesis builds on the analysis of a automatic system for automotive automatic clutches. In this field of study there are some constraint to take into account and through them it is possible to find the best technological solution. The system under consideration is characterized as electromechanical, with an electric motor brush DC and reduction system very complex. The system was modeled using the Bond-Graph technique which allowed the drafting of the dynamical system equations, in state space form. In fact the system itself is quite complex due to the fact that multiple dynamic domains were taken into account. The result is a unique model where all the dynamics are represented, with constitutive equations. Three alternative solutions have been proposed to improve performance and reduce power consumption and system complexity. The prototypes were built and tested. The evaluation of the results were followed by a model parameter identificatio

Model-Based Control Design of an EHA Position Control Based on Multicriteria Optimization

For the control of dynamic systems such as an Electro-Hydraulic Actuator (EHA), there is a need to optimize the control based on simulations, since a prototype or a physical system is usually not available during system design. In consequence, no system identification can be performed. Therefore, it is unclear how well a simulation model of an EHA can be used for multicriteria optimization of the position control due to the uncertain model quality. To evaluate the suitability for control optimization, the EHA is modeled and parameterized as a grey-box model using existing parameters independent of test bench experiments. A method for multi-objective optimization of a controller is used to optimize the position control of the EHA. Finally, the step responses are compared with the test bench. The evaluation of the step responses for different loads and control parameters shows similar behavior between the simulation model and the physical system on the test bench, although the essential phenomena could not be reproduced. This means that the model quality achieved by modeling is suitable as an indication for the optimization of the control by simulation without a physical system

The strengthening of Islamic values on students through the metaphor of accepting death: an Indonesian perception

Death is a sure entity for every human that cannot be avoided in human life. The purpose of this research was to reveal that the usage of metaphor technique called, “The Acceptance of Death” in group counselling can improve Islamic values on Muslim students. This study employed an action research using The Kemmis Model with the stages of planning, action, observation, and reflection. This research implemented group counselling with metaphor technique of accepting death by students. The research subjects were 20 female students of State Islamic University of Sultan Syarif Kasim Riau who lived in the campus dormitory. The selection of the research subjects was done randomly by choosing the female students who were willing to join the group counselling activity. The research results showed that the practice of metaphor technique of “The Acceptance of Death” in the group counselling can strengthen the Islamic values and their characteristics as Muslims. They understand their previous mistakes and are willing to be better for the sake of their life. They have the commitment to become the best students and the best Muslims

Improved Third Order PID Sliding Mode Controller for Electrohydraulic Actuator Tracking Control

An electrohydraulic actuator (EHA) system is a combination of hydraulic systems and electrical systems which can produce a rapid response, high power-to-weight ratio, and large stiffness. Nevertheless, the EHA system has nonlinear behaviors and modeling uncertainties such as frictions, internal and external leakages, and parametric uncertainties, which lead to significant challenges in controller design for trajectory tracking. Therefore, this paper presents the design of an intelligent adaptive sliding mode proportional integral and derivative (SMCPID) controller, which is the main contribution toward the development of effective control on a third-order model of a double-acting EHA system for trajectory tracking, which significantly reduces chattering under noise disturbance. The sliding mode controller (SMC) is created by utilizing the exponential rule and the Lyapunov theorem to ensure closed-loop stability. The chattering in the SMC controller has been significantly decreased by substituting the modified sigmoid function for the signum function. Particle swarm optimization (PSO) was used to lower the total of absolute errors to adjust the controller. In order to demonstrate the efficacy of the SMCPID controller, the results for trajectory tracking and noise disturbance rejection were compared to those obtained using the proportional integral and derivative (PID), the proportional and derivative (PD), and the sliding mode proportional and derivative (SMCPD) controllers, respectively. In conclusion, the results of the extensive research given have indicated that the SMCPID controller outperforms the PD, PID, and SMCPD controllers in terms of overall performance.

Improving Energy Efficiency and Motion Control in Load-Carrying Applications using Self-Contained Cylinders

Because of an increasing focus on environmental impact, including CO2 emissions and fluid spill pollution, inefficient hydraulic systems are being replaced by more environmentally friendly alternatives in several industries. For instance, in some offshore applications that have multiple diesel generators continuously running to produce electricity, all hydraulic rotating actuators supplied from a central hydraulic power unit have been replaced with AC induction motors containing a variable frequency drive and gearbox. However, hydraulic linear actuators are still needed in most load-carrying applications mainly because of their high reliability associated with external impact shocks. Moreover, their force capacity is higher than that of their linear electromechanical counterparts. Valve-controlled linear actuators (cylinders) supplied from a centralized hydraulic power unit are standard in offshore load-carrying applications. In addition to the advantages mentioned above of hydraulic linear actuators, they have, nevertheless, a number of important drawbacks, which include: 1) a high level of energy consumption due to significant power losses caused by flow throttling in both the pipelines and valves, 2) reduced motion performance due to the influence of load-holding valves, 3) high CO2 emissions and fuel costs related to the diesel generator that supplies electricity to the hydraulic power unit, 4) significant potential for hydraulic fluid leakage because of many leakage points, 5) demanding efforts with respect to installation and maintenance, as well as 6) costly piping due to the centralized hydraulic power supply. The work presented in this dissertation and the appended papers are devoted to replacing inefficient hydraulic linear actuation systems traditionally used in offshore load-carrying applications with more environmentally friendly solutions. Two alternative technologies are identified, namely electro-mechanical and electro-hydraulic self-contained cylinders. The feasibility of replacing conventional valve-controlled cylinders with self-contained cylinder concepts is investigated in two relevant case studies.publishedVersio

Model based control strategies for a class of nonlinear mechanical sub-systems

This paper presents a comparison between various control strategies for a class of mechanical actuators common in heavy-duty industry. Typical actuator components are hydraulic or pneumatic elements with static non-linearities, which are commonly referred to as Hammerstein systems. Such static non-linearities may vary in time as a function of the load and hence classical inverse-model based control strategies may deliver sub-optimal performance. This paper investigates the ability of advanced model based control strategies to satisfy a tolerance interval for position error values, overshoot and settling time specifications. Due to the presence of static non-linearity requiring changing direction of movement, control effort is also evaluated in terms of zero crossing frequency (up-down or left-right movement). Simulation and experimental data from a lab setup suggest that sliding mode control is able to improve global performance parameters