A model-based approach for supporting flexible automation production systems and an agent-based implementaction

158 p.En esta Tesis Doctoral se plantea una arquitectura de gestión genérica y personalizable, capaz de asegurar el cumplimiento de los requisitos de calidad de servicio (QoS) de un sistema de control industrial. Esta arquitectura permite la modificación de los mecanismos de detección y recuperación de los requisitos de QoS en función de diversos tipos de ésta. Como prueba de concepto, la arquitectura de gestión ha sido implementada mediante un middleware basado en sistemas multi-agente. Este middleware proporciona una serie de agentes distribuidos, los cuales se encargan de la monitorización y recuperación de las QoS en caso de su perdida.La incorporación de los mecanismos de reconfiguración incrementa la complejidad de los sistemas de control. Con el fin de facilitar el diseño de estos sistemas, se ha presentado un framework basado en modelos que guía y facilita el diseño de los sistemas de control reconfigurables. Este framework proporciona una serie de herramientas basadas en modelos que permiten la generación automática del código de control del sistema, así como de los mecanismos de monitorización y reconfiguración de los agentes del middleware.La implementación de la arquitectura ha sido validada mediante una serie de escenarios basados en una célula de montaje real

Acute stress response for self-optimizing mechatronic systems

Self-optimizing mechatronic systems react autonomously and flexibly to changing conditions. They are capable of learning and optimize their behavior throughout their life cycle. The paradigm of self-optimization is originally inspired by the behavior of biological systems. The key to the successful development of self-optimizing systems is a conceptual design process that precisely describes the desired system behavior. In the area of mechanical engineering, active principles based on physical effects such as friction or lever are widely used to concretize the construction structure and the behavior. The same approach can be found in the domain of software-engineering with software patterns such as the broker-pattern or the strategy pattern. However there is no appropriate design schema for the development of intelligent mechatronic systems covering the needs to fulfill the paradigm of self-optimization. This article proposes such a schema called Active Patterns for Self-Optimization. It is shown how a catalogue of active patterns can be derived from a set of four basic active patterns. This design approach is validated for a networked mechatronic system in a multiagent setting where the behavior is implemented according to a biologically inspired technique – the neuro-fuzzy learning method.1st IFIP International Conference on Biologically Inspired Cooperative Computing - Mechatronics and Computer ClustersRed de Universidades con Carreras en Informática (RedUNCI

Improving transferability between different engineering stages in the development of automated material flow modules

For improving flexibility and robustness of the engineering of automated production systems (aPS) in case of extending, reducing or modifying parts, several approaches propose an encapsulation and clustering of related functions, e.g. from the electrical, mechanical or software engineering, based on a modular architecture. Considering the development of these modules, there are different stages, e.g. module planning or functional engineering, which have to be completed. A reference model that addresses the different stages for the engineering of aPS is proposed by AutomationML. Due to these different stages and the integration of several engineering disciplines, e.g. mechanical, electrical/electronic or software engineering, information not limited to one discipline are stored redundantly increasing the effort to transfer information and the risk of inconsistency. Although, data formats for the storage and exchange of plant engineering information exist, e.g. AutomationML, fixed domain specific structures and relations of the information, e.g. for automated material flow systems (aMFS), are missing. This paper presents the integration of a meta model into the development of modules for aMFS to improve the transferability and consistency of information between the different engineering stages and the increasing level of detail from the coarse-grained plant planning to the fine-grained functional engineering.Comment: 11 pages, https://ieeexplore.ieee.org/abstract/document/7499821

Engineering methods and tools for cyber–physical automation systems

Much has been published about potential benefits of the adoption of cyber–physical systems (CPSs) in manufacturing industry. However, less has been said about how such automation systems might be effectively configured and supported through their lifecycles and how application modeling, visualization, and reuse of such systems might be best achieved. It is vitally important to be able to incorporate support for engineering best practice while at the same time exploiting the potential that CPS has to offer in an automation systems setting. This paper considers the industrial context for the engineering of CPS. It reviews engineering approaches that have been proposed or adopted to date including Industry 4.0 and provides examples of engineering methods and tools that are currently available. The paper then focuses on the CPS engineering toolset being developed by the Automation Systems Group (ASG) in the Warwick Manufacturing Group (WMG), University of Warwick, Coventry, U.K. and explains via an industrial case study how such a component-based engineering toolset can support an integrated approach to the virtual and physical engineering of automation systems through their lifecycle via a method that enables multiple vendors' equipment to be effectively integrated and provides support for the specification, validation, and use of such systems across the supply chain, e.g., between end users and system integrators

A model-based approach for supporting flexible automation production systems and an agent-based implementaction

158 p.En esta Tesis Doctoral se plantea una arquitectura de gestión genérica y personalizable, capaz de asegurar el cumplimiento de los requisitos de calidad de servicio (QoS) de un sistema de control industrial. Esta arquitectura permite la modificación de los mecanismos de detección y recuperación de los requisitos de QoS en función de diversos tipos de ésta. Como prueba de concepto, la arquitectura de gestión ha sido implementada mediante un middleware basado en sistemas multi-agente. Este middleware proporciona una serie de agentes distribuidos, los cuales se encargan de la monitorización y recuperación de las QoS en caso de su perdida.La incorporación de los mecanismos de reconfiguración incrementa la complejidad de los sistemas de control. Con el fin de facilitar el diseño de estos sistemas, se ha presentado un framework basado en modelos que guía y facilita el diseño de los sistemas de control reconfigurables. Este framework proporciona una serie de herramientas basadas en modelos que permiten la generación automática del código de control del sistema, así como de los mecanismos de monitorización y reconfiguración de los agentes del middleware.La implementación de la arquitectura ha sido validada mediante una serie de escenarios basados en una célula de montaje real

Design, modelling, simulation and integration of cyber physical systems: Methods and applications

The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine

Describing Structure and Complex Interactions in Multi-Agent-Based Industrial Cyber-Physical Systems

The description of structure and complex interactions in Multi-agent-based Industrial Cyber-physical (MAS-ICPS) systems has been elusively addressed in the literature. Existing works, grounded on model-based engineering, have been successful at characterizing and solving system integration problems. However, they fail to describe accurately the collective and dynamic execution behaviour of large and complex industrial systems, particularly in more discrete production domains, such as: automotive, home appliances, aerospace, food and beverages, etc. In these domains, the execution flow diverts dynamically due to production disturbances, custom orders, fluctuations in demand in mixed model production, faults, quality-control and product rework, etc. These dynamic conditions require re-allocation and reconfiguration of production resources, redirection of production flows, re-scheduling of orders, etc. A meta-model for describing the structure and complex interactions in MAS-ICPS is defined in this paper. This contribution goes beyond the State-Of-The-Art (SOTA) as the proposed meta-model describes structure, as many other literature contributions, but also describes the execution behaviour of arbitrarily complex interactions. The previous is achieved with the introduction of general execution flow control operators in the meta-model. These operators cover, among other aspects, delegation of the execution flow and dynamic decision making. Additionally, the contribution also goes beyond the SOTA by including validation mechanisms for the models generated by the meta-model. Finally, the contribution adds to the current literature by providing a meta-model focusing on production execution and not just on describing the structural connectivity aspects of ICPSs.publishersversionpublishe