A survey on mobility management protocols in Wireless Sensor Networks based on 6LoWPAN technology

International audienceMobility has the advantage of enlarging WSN applications. However, proposing a mobility support protocol in Wireless Sensor Networks (WSNs) represents a significant challenge. In this paper, we propose a survey on the mobility management protocols in Wireless Sensor Networks based on 6LoWPAN technology. This technology enables to connect IP sensor devices to other IP networks without any need for gateways. We highlight the advantages and drawbacks with performances issues of each studied solution. Then, in order to select a typical classification of mobility management protocols in WSNs, we provide some classification criteria and approaches on which these protocols are based. Finally, we present a comparative study of the existing protocols in terms of the required performances for this network type

The support of multipath routing in IPv6-based internet of things

The development of IPv6-based network architectures for Internet of Things (IoT) systems is a feasible approach to widen the horizon for more effective applications, but remains a challenge. Network routing needs to be effectively addressed in such environments of scarce computational and energy resources. The Internet Engineering Task Force (IETF) specified the IPv6 Routing Protocol for Low Power and Lossy Network (RPL) to provide a basic IPv6-based routing framework for IoT networks. However, the RPL design has the potential of extending its functionality to a further limit and incorporating the support of advanced routing mechanisms. These include multipath routing which has opened the doors for great improvements towards efficient energy balancing, load distribution, and even more. This paper fulfilled a need for an effective review of recent advancements in Internet of Things (IoT) networking. In particular, it presented an effective review and provided a taxonomy of the different multipath routing solutions enhancing the RPL protocol. The aim was to discover its current state and outline the importance of integrating such a mechanism into RPL to revive its potentiality to a wider range of IoT applications. This paper also discussed the latest research findings and provided some insights into plausible follow-up researches

A critical analysis of mobility management related issues of wireless sensor networks in cyber physical systems

Mobility management has been a long-standing issue in mobile wireless sensor networks and especially in the context of cyber physical systems; its implications are immense. This paper presents a critical analysis of the current approaches to mobility management by evaluating them against a set of criteria which are essentially inherent characteristics of such systems on which these approaches are expected to provide acceptable performance. We summarize these characteristics by using a quadruple set of metrics. Additionally, using this set we classify the various approaches to mobility management that are discussed in this paper. Finally, the paper concludes by reviewing the main findings and providing suggestions that will be helpful to guide future research efforts in the area

A critical analysis of mobility management related issues of wireless sensor networks in cyber physical systems

Mobility management has been a long-standing issue in mobile wireless sensor networks and especially in the context of cyber physical systems its implications are immense. This paper presents a critical analysis of the current approaches to mobility management by evaluating them against a set of criteria which are essentially inherent characteristics of such systems on which these approaches are expected to provide acceptable performance. We summarize these characteristics by using a quadruple set of metrics. Additionally, using this set we classify the various approaches to mobility management that are discussed in this paper. Finally, the paper concludes by reviewing the main findings and providing suggestions that will be helpful to guide future research efforts in the area. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Muhammad Imran” is provided in this record*

Performance Assessment of Routing Protocols for IoT/6LoWPAN Networks

The Internet of Things (IoT) proposes a disruptive communication paradigm that allows smart objects to exchange data among themselves to reach a common goal. IoT application scenarios are multiple and can range from a simple smart home lighting system to fully controlled automated manufacturing chains. In the majority of IoT deployments, things are equipped with small devices that can suffer from severe hardware and energy restrictions that are responsible for performing data processing and wireless communication tasks. Thus, due to their features, communication networks that are used by these devices are generally categorized as Low Power and Lossy Networks (LLNs). The considerable variation in IoT applications represents a critical issue to LLN networks, which should offer support to different requirements as well as keeping reasonable quality-of-service (QoS) levels. Based on this challenge, routing protocols represent a key issue in IoT scenarios deployment. Routing protocols are responsible for creating paths among devices and their interactions. Hence, network performance and features are highly dependent on protocol behavior. Also, based on the adopted protocol, the support for some specific requirements of IoT applications may or may not be provided. Thus, a routing protocol should be projected to attend the needs of the applications considering the limitations of the device that will execute them. Looking to attend the demand of routing protocols for LLNs and, consequently, for IoT networks, the Internet Engineering Task Force (IETF) has designed and standardized the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). This protocol, although being robust and offering features to fulfill the need of several applications, still presents several faults and weaknesses (mainly related to its high complexity and memory requirement), which limits its adoption in IoT scenarios. An alternative to RPL, the Lightweight On-demand Ad Hoc Distancevector Routing Protocol – Next Generation (LOADng) has emerged as a less complicated routing solution for LLNs. However, the cost of its simplicity is paid for with the absence of adequate support for a critical set of features required for many IoT environments. Thus, based on the challenging open issues related to routing in IoT networks, this thesis aims to study and propose contributions to better attend the network requirements of IoT scenarios. A comprehensive survey, reviewing state-of-the-art routing protocols adopted for IoT, identified the strengths and weaknesses of current solutions available in the literature. Based on the identified limitations, a set of improvements is designed to overcome these issues and enhance IoT network performance. The novel solutions are proposed to include reliable and efficient support to attend the needs of IoT applications, such as mobility, heterogeneity, and different traffic patterns. Moreover, mechanisms to improve the network performance in IoT scenarios, which integrate devices with different communication technologies, are introduced. The studies conducted to assess the performance of the proposed solutions showed the high potential of the proposed solutions. When the approaches presented in this thesis were compared with others available in the literature, they presented very promising results considering the metrics related to the Quality of Service (QoS), network and energy efficiency, and memory usage as well as adding new features to the base protocols. Hence, it is believed that the proposed improvements contribute to the state-of-the-art of routing solutions for IoT networks, increasing the performance and adoption of enhanced protocols.A Internet das Coisas, do inglês Internet of Things (IoT), propõe um paradigma de comunicação disruptivo para possibilitar que dispositivos, que podem ser dotados de comportamentos autónomos ou inteligentes, troquem dados entre eles buscando alcançar um objetivo comum. Os cenários de aplicação do IoT são muito variados e podem abranger desde um simples sistema de iluminação para casa até o controle total de uma linha de produção industrial. Na maioria das instalações IoT, as “coisas” são equipadas com um pequeno dispositivo, responsável por realizar as tarefas de comunicação e processamento de dados, que pode sofrer com severas restrições de hardware e energia. Assim, devido às suas características, a rede de comunicação criada por esses dispositivos é geralmente categorizada como uma Low Power and Lossy Network (LLN). A grande variedade de cenários IoT representam uma questão crucial para as LLNs, que devem oferecer suporte aos diferentes requisitos das aplicações, além de manter níveis de qualidade de serviço, do inglês Quality of Service (QoS), adequados. Baseado neste desafio, os protocolos de encaminhamento constituem um aspecto chave na implementação de cenários IoT. Os protocolos de encaminhamento são responsáveis por criar os caminhos entre os dispositivos e permitir suas interações. Assim, o desempenho e as características da rede são altamente dependentes do comportamento destes protocolos. Adicionalmente, com base no protocolo adotado, o suporte a alguns requisitos específicos das aplicações de IoT podem ou não ser fornecidos. Portanto, estes protocolos devem ser projetados para atender as necessidades das aplicações assim como considerando as limitações do hardware no qual serão executados. Procurando atender às necessidades dos protocolos de encaminhamento em LLNs e, consequentemente, das redes IoT, a Internet Engineering Task Force (IETF) desenvolveu e padronizou o IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). O protocolo, embora seja robusto e ofereça recursos para atender às necessidades de diferentes aplicações, apresenta algumas falhas e fraquezas (principalmente relacionadas com a sua alta complexidade e necessidade de memória) que limitam sua adoção em cenários IoT. Em alternativa ao RPL, o Lightweight On-demand Ad hoc Distance-vector Routing Protocol – Next Generation (LOADng) emergiu como uma solução de encaminhamento menos complexa para as LLNs. Contudo, o preço da simplicidade é pago com a falta de suporte adequado para um conjunto de recursos essenciais necessários em muitos ambientes IoT. Assim, inspirado pelas desafiadoras questões ainda em aberto relacionadas com o encaminhamento em redes IoT, esta tese tem como objetivo estudar e propor contribuições para melhor atender os requisitos de rede em cenários IoT. Uma profunda e abrangente revisão do estado da arte sobre os protocolos de encaminhamento adotados em IoT identificou os pontos fortes e limitações das soluções atuais. Com base nas debilidades encontradas, um conjunto de soluções de melhoria é proposto para superar carências existentes e melhorar o desempenho das redes IoT. As novas soluções são propostas para incluir um suporte confiável e eficiente capaz atender às necessidades das aplicações IoT relacionadas com suporte à mobilidade, heterogeneidade dos dispositivos e diferentes padrões de tráfego. Além disso, são introduzidos mecanismos para melhorar o desempenho da rede em cenários IoT que integram dispositivos com diferentes tecnologias de comunicação. Os vários estudos realizados para mensurar o desempenho das soluções propostas mostraram o grande potencial do conjunto de melhorias introduzidas. Quando comparadas com outras abordagens existentes na literatura, as soluções propostas nesta tese demonstraram um aumento do desempenho consistente para métricas relacionadas a qualidade de serviço, uso de memória, eficiência energética e de rede, além de adicionar novas funcionalidades aos protocolos base. Portanto, acredita-se que as melhorias propostas contribuiem para o avanço do estado da arte em soluções de encaminhamento para redes IoT e aumentar a adoção e utilização dos protocolos estudados

Pervasive service discovery in low-power and lossy networks

Pervasive Service Discovery (SD) in Low-power and Lossy Networks (LLNs) is expected to play a major role in realising the Internet of Things (IoT) vision. Such a vision aims to expand the current Internet to interconnect billions of miniature smart objects that sense and act on our surroundings in a way that will revolutionise the future. The pervasiveness and heterogeneity of such low-power devices requires robust, automatic, interoperable and scalable deployment and operability solutions. At the same time, the limitations of such constrained devices impose strict challenges regarding complexity, energy consumption, time-efficiency and mobility. This research contributes new lightweight solutions to facilitate automatic deployment and operability of LLNs. It mainly tackles the aforementioned challenges through the proposition of novel component-based, automatic and efficient SD solutions that ensure extensibility and adaptability to various LLN environments. Building upon such architecture, a first fully-distributed, hybrid pushpull SD solution dubbed EADP (Extensible Adaptable Discovery Protocol) is proposed based on the well-known Trickle algorithm. Motivated by EADPs’ achievements, new methods to optimise Trickle are introduced. Such methods allow Trickle to encompass a wide range of algorithms and extend its usage to new application domains. One of the new applications is concretized in the TrickleSD protocol aiming to build automatic, reliable, scalable, and time-efficient SD. To optimise the energy efficiency of TrickleSD, two mechanisms improving broadcast communication in LLNs are proposed. Finally, interoperable standards-based SD in the IoT is demonstrated, and methods combining zero-configuration operations with infrastructure-based solutions are proposed. Experimental evaluations of the above contributions reveal that it is possible to achieve automatic, cost-effective, time-efficient, lightweight, and interoperable SD in LLNs. These achievements open novel perspectives for zero-configuration capabilities in the IoT and promise to bring the ‘things’ to all people everywhere

Impacts of Mobility Models on RPL-Based Mobile IoT Infrastructures: An Evaluative Comparison and Survey

With the widespread use of IoT applications and the increasing trend in the number of connected smart devices, the concept of routing has become very challenging. In this regard, the IPv6 Routing Protocol for Low-power and Lossy Networks (PRL) was standardized to be adopted in IoT networks. Nevertheless, while mobile IoT domains have gained significant popularity in recent years, since RPL was fundamentally designed for stationary IoT applications, it could not well adjust with the dynamic fluctuations in mobile applications. While there have been a number of studies on tuning RPL for mobile IoT applications, but still there is a high demand for more efforts to reach a standard version of this protocol for such applications. Accordingly, in this survey, we try to conduct a precise and comprehensive experimental study on the impact of various mobility models on the performance of a mobility-aware RPL to help this process. In this regard, a complete and scrutinized survey of the mobility models has been presented to be able to fairly justify and compare the outcome results. A significant set of evaluations has been conducted via precise IoT simulation tools to monitor and compare the performance of the network and its IoT devices in mobile RPL-based IoT applications under the presence of different mobility models from different perspectives including power consumption, reliability, latency, and control packet overhead. This will pave the way for researchers in both academia and industry to be able to compare the impact of various mobility models on the functionality of RPL, and consequently to design and implement application-specific and even a standard version of this protocol, which is capable of being employed in mobile IoT applications

Design and Analysis of an Optimized Scheduling Approach using Decision Making over IoT (TOPSI) for Relay based Routing Protocols

This research work focuses on support towards QoS approaches over IoT using computational models based on scheduling schemes to enable service oriented systems. IoT system supports on application of day-to-day physical tasks with virtual objects which inter-connect to create opportunities for integration of world into computer-based systems. The QoS scheduling model TOPSI implements a top-down decision making process over top to bottom interconnected layers using service supportive optimization algorithms based on demandable QoS requirements and applications. TOPSI adopts Markov Decision Process (MDP) at the three layers from transport layer to application layer which identifies the QoS supportive metrics for IoT and maximizes the service quality at network layer. The connection cost over multiple sessions is stochastic in nature as service is supportive based on decision making algorithms. TOPSI uses QoS attributes adopted in traditional QoS mechanisms based on transmission of sensor data and decision making based on sensing ability. TOPSI model defines and measures the QoS metrics of IoT network using adaptive monitoring module at transport layer for the defined service in use. TOPSI shows optimized throughput for variable load in use, sessions and observed delay. TOPSI works on route identification, route binding, update and deletion process based on the validation of adaptive QoS metrics, before the optimal route selection process between source and destination. This research work discusses on the survey and analyzes the performance of TOPSI and RBL schemes. The simulation test beds and scenario mapping are carried out using Cooja network simulator

Socio-economic aware data forwarding in mobile sensing networks and systems

The vision for smart sustainable cities is one whereby urban sensing is core to optimising city operation which in turn improves citizen contentment. Wireless Sensor Networks are envisioned to become pervasive form of data collection and analysis for smart cities but deployment of millions of inter-connected sensors in a city can be cost-prohibitive. Given the ubiquity and ever-increasing capabilities of sensor-rich mobile devices, Wireless Sensor Networks with Mobile Phones (WSN-MP) provide a highly flexible and ready-made wireless infrastructure for future smart cities. In a WSN-MP, mobile phones not only generate the sensing data but also relay the data using cellular communication or short range opportunistic communication. The largest challenge here is the efficient transmission of potentially huge volumes of sensor data over sometimes meagre or faulty communications networks in a cost-effective way. This thesis investigates distributed data forwarding schemes in three types of WSN-MP: WSN with mobile sinks (WSN-MS), WSN with mobile relays (WSN-HR) and Mobile Phone Sensing Systems (MPSS). For these dynamic WSN-MP, realistic models are established and distributed algorithms are developed for efficient network performance including data routing and forwarding, sensing rate control and and pricing. This thesis also considered realistic urban sensing issues such as economic incentivisation and demonstrates how social network and mobility awareness improves data transmission. Through simulations and real testbed experiments, it is shown that proposed algorithms perform better than state-of-the-art schemes.Open Acces

Adaptation of the human nervous system for self-aware secure mobile and IoT systems

IT systems have been deployed across several domains, such as hospitals and industries, for the management of information and operations. These systems will soon be ubiquitous in every field due to the transition towards the Internet of Things (IoT). The IoT brings devices with sensory functions into IT systems through the process of internetworking. The sensory functions of IoT enable them to generate and process information automatically, either without human contribution or having the least human interaction possible aside from the information and operations management tasks. Security is crucial as it prevents system exploitation. Security has been employed after system implementation, and has rarely been considered as a part of the system. In this dissertation, a novel solution based on a biological approach is presented to embed security as an inalienable part of the system. The proposed solution, in the form of a prototype of the system, is based on the functions of the human nervous system (HNS) in protecting its host from the impacts caused by external or internal changes. The contributions of this work are the derivation of a new system architecture from HNS functionalities and experiments that prove the implementation feasibility and efficiency of the proposed HNS-based architecture through prototype development and evaluation. The first contribution of this work is the adaptation of human nervous system functions to propose a new architecture for IT systems security. The major organs and functions of the HNS are investigated and critical areas are identified for the adaptation process. Several individual system components with similar functions to the HNS are created and grouped to form individual subsystems. The relationship between these components is established in a similar way as in the HNS, resulting in a new system architecture that includes security as a core component. The adapted HNS-based system architecture is employed in two the experiments prove its implementation capability, enhancement of security, and overall system operations. The second contribution is the implementation of the proposed HNS-based security solution in the IoT test-bed. A temperature-monitoring application with an intrusion detection system (IDS) based on the proposed HNS architecture is implemented as part of the test-bed experiment. Contiki OS is used for implementation, and the 6LoWPAN stack is modified during the development process. The application, together with the IDS, has a brain subsystem (BrSS), a spinal cord subsystem (SCSS), and other functions similar to the HNS whose names are changed. The HNS functions are shared between an edge router and resource-constrained devices (RCDs) during implementation. The experiment is evaluated in both test-bed and simulation environments. Zolertia Z1 nodes are used to form a 6LoWPAN network, and an edge router is created by combining Pandaboard and Z1 node for a test-bed setup. Two networks with different numbers of sensor nodes are used as simulation environments in the Cooja simulator. The third contribution of this dissertation is the implementation of the proposed HNS-based architecture in the mobile platform. In this phase, the Android operating system (OS) is selected for experimentation, and the proposed HNS-based architecture is specifically tailored for Android. A context-based dynamically reconfigurable access control system (CoDRA) is developed based on the principles of the refined HNS architecture. CoDRA is implemented through customization of Android OS and evaluated under real-time usage conditions in test-bed environments. During the evaluation, the implemented prototype mimicked the nature of the HNS in securing the application under threat with negligible resource requirements and solved the problems in existing approaches by embedding security within the system. Furthermore, the results of the experiments highlighted the retention of HNS functions after refinement for different IT application areas, especially the IoT, due to its resource-constrained nature, and the implementable capability of our proposed HNS architecture.--- IT-järjestelmiä hyödynnetään tiedon ja toimintojen hallinnassa useilla aloilla, kuten sairaaloissa ja teollisuudessa. Siirtyminen kohti esineiden Internetiä (Internet of Things, IoT) tuo tällaiset laitteet yhä kiinteämmäksi osaksi jokapäiväistä elämää. IT-järjestelmiin liitettyjen IoT-laitteiden sensoritoiminnot mahdollistavat tiedon automaattisen havainnoinnin ja käsittelyn osana suurempaa järjestelmää jopa täysin ilman ihmisen myötävaikutusta, poislukien mahdolliset ylläpito- ja hallintatoimenpiteet. Turvallisuus on ratkaisevan tärkeää IT-järjestelmien luvattoman käytön estämiseksi. Valitettavan usein järjestelmäsuunnittelussa turvallisuus ei ole osana ydinsuunnitteluprosessia, vaan otetaan huomioon vasta käyttöönoton jälkeen. Tässä väitöskirjassa esitellään uudenlainen biologiseen lähestymistapaan perustuva ratkaisu, jolla turvallisuus voidaan sisällyttää erottamattomaksi osaksi järjestelmää. Ehdotettu prototyyppiratkaisu perustuu ihmisen hermoston toimintaan tilanteessa, jossa se suojelee isäntäänsä ulkoisten tai sisäisten muutosten vaikutuksilta. Tämän työn keskeiset tulokset ovat uuden järjestelmäarkkitehtuurin johtaminen ihmisen hermoston toimintaperiaatteesta sekä tällaisen järjestelmän toteutettavuuden ja tehokkuuden arviointi kokeellisen prototyypin kehittämisen ja toiminnan arvioinnin avulla. Tämän väitöskirjan ensimmäinen kontribuutio on ihmisen hermoston toimintoihin perustuva IT-järjestelmäarkkitehtuuri. Tutkimuksessa arvioidaan ihmisen hermoston toimintaa ja tunnistetaan keskeiset toiminnot ja toiminnallisuudet, jotka mall-innetaan osaksi kehitettävää järjestelmää luomalla näitä vastaavat järjestelmäkomponentit. Nä-istä kootaan toiminnallisuudeltaan hermostoa vastaavat osajärjestelmät, joiden keskinäinen toiminta mallintaa ihmisen hermoston toimintaa. Näin luodaan arkkitehtuuri, jonka keskeisenä komponenttina on turvallisuus. Tämän pohjalta toteutetaan kaksi prototyyppijärjestelmää, joiden avulla arvioidaan arkkitehtuurin toteutuskelpoisuutta, turvallisuutta sekä toimintakykyä. Toinen kontribuutio on esitetyn hermostopohjaisen turvallisuusratkaisun toteuttaminen IoT-testialustalla. Kehitettyyn arkkitehtuuriin perustuva ja tunkeutumisen estojärjestelmän (intrusion detection system, IDS) sisältävä lämpötilan seurantasovellus toteutetaan käyttäen Contiki OS -käytöjärjestelmää. 6LoWPAN protokollapinoa muokataan tarpeen mukaan kehitysprosessin aikana. IDS:n lisäksi sovellukseen kuuluu aivo-osajärjestelmä (Brain subsystem, BrSS), selkäydinosajärjestelmä (Spinal cord subsystem, SCSS), sekä muita hermoston kaltaisia toimintoja. Nämä toiminnot jaetaan reunareitittimen ja resurssirajoitteisten laitteiden kesken. Tuloksia arvioidaan sekä simulaatioiden että testialustan tulosten perusteella. Testialustaa varten 6LoWPAN verkon toteutukseen valittiin Zolertia Z1 ja reunareititin on toteutettu Pandaboardin ja Z1:n yhdistelmällä. Cooja-simulaattorissa käytettiin mallinnukseen ymp-äristönä kahta erillistä ja erikokoisuta sensoriverkkoa. Kolmas tämän väitöskirjan kontribuutio on kehitetyn hermostopohjaisen arkkitehtuurin toteuttaminen mobiilialustassa. Toteutuksen alustaksi valitaan Android-käyttöjärjestelmä, ja kehitetty arkkitehtuuri räätälöidään Androidille. Tuloksena on kontekstipohjainen dynaamisesti uudelleen konfiguroitava pääsynvalvontajärjestelmä (context-based dynamically reconfigurable access control system, CoDRA). CoDRA toteutetaan mukauttamalla Androidin käyttöjärjestelmää ja toteutuksen toimivuutta arvioidaan reaaliaikaisissa käyttöolosuhteissa testialustaympäristöissä. Toteutusta arvioitaessa havaittiin, että kehitetty prototyyppi jäljitteli ihmishermoston toimintaa kohdesovelluksen suojaamisessa, suoriutui tehtävästään vähäisillä resurssivaatimuksilla ja onnistui sisällyttämään turvallisuuden järjestelmän ydintoimintoihin. Tulokset osoittivat, että tämän tyyppinen järjestelmä on toteutettavissa sekä sen, että järjestelmän hermostonkaltainen toiminnallisuus säilyy siirryttäessä sovellusalueelta toiselle, erityisesti resursseiltaan rajoittuneissa IoT-järjestelmissä