Design and Analysis of an Adaptive Asynchronous System Architecture for Energy Efficiency

Power has become a critical design parameter for digital CMOS integrated circuits. With performance still garnering much concern, a central idea has emerged: minimizing power consumption while maintaining performance. The use of dynamic voltage scaling (DVS) with parallelism has shown to be an effective way of saving power while maintaining performance. However, the potency of DVS and parallelism in traditional, clocked synchronous systems is limited because of the strict timing requirements such systems must comply with. Delay-insensitive (DI) asynchronous systems have the potential to benefit more from these techniques due to their flexible timing requirements and high modularity. This dissertation presents the design and analysis of a real-time adaptive DVS architecture for paralleled Multi-Threshold NULL Convention Logic (MTNCL) systems. Results show that energy-efficient systems with low area overhead can be created using this approach

동기 회로에서 시간 오류를 고려한 공급전압 제어

학위논문 (석사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2015. 2. 최기영.Modern embedded systems are becoming more and more constrained by power consumption. While we require those systems to compute even more data at faster speed, lowering energy consumption is essential to preserve battery life as well as integrity of devices. Amongst many techniques to reduce power consumption of chips such as power gating, clock gating, etc., lowering the supply voltage (maybe reducing chips frequency) is known to be the most effective one. However, lowering the supply voltage of chips too much down to near the threshold voltage of transistors causes the logic delay to vary exponentially with intrinsic and extrinsic variations (process variations, temperature, aging, etc.) and thus forces the designer to set increased timing margin. This thesis proposes a technique for automatically adjusting the supply voltage to match the speed of a logic block with a given time constraint. Depending on process and temperature variations, our technique chooses the minimum supply voltage to satisfy the timing constraint defined by the designer. This allows him/her to reduce the default supply voltage of the logic block and thus save power. In our experiments at the 28/32nm technology node, we succeeded in reducing the logic block power by 52% on average by varying the supply voltage between 0.55V and 1V, while the nominal supply voltage is 1.05V.Abstract Contents List of Figures List of Tables Chapter 1 Introduction 1 Chapter 2 Background 5 1.1 Near-Threshold Computing 5 1.2 Current Sensing Completion Detection 7 Chapter 3 Proposed Approach 12 Chapter 4 Experimental setup 16 4.1 Intrinsic Variations 16 4.2 Extrinsic Variations 17 4.3 Control Block 17 4.4 Logic Block 17 4.5 Experimental parameters 19 Chapter 5 Experimental Results 20 5.1 Results at the TT 22 5.2 Result at the FF 22 5.3 Results at the SS 22 5.4 Effect on temperature 25U 5.5 Final power savings 26 Chapter 6 Conclusion and future work 29 Bibliography 31Maste

CATA: Criticality aware task acceleration for multicore processors

Managing criticality in task-based programming models opens a wide range of performance and power optimization opportunities in future manycore systems. Criticality aware task schedulers can benefit from these opportunities by scheduling tasks to the most appropriate cores. However, these schedulers may suffer from priority inversion and static binding problems that limit their expected improvements. Based on the observation that task criticality information can be exploited to drive hardware reconfigurations, we propose a Criticality Aware Task Acceleration (CATA) mechanism that dynamically adapts the computational power of a task depending on its criticality. As a result, CATA achieves significant improvements over a baseline static scheduler, reaching average improvements up to 18.4% in execution time and 30.1% in Energy-Delay Product (EDP) on a simulated 32-core system. The cost of reconfiguring hardware by means of a software-only solution rises with the number of cores due to lock contention and reconfiguration overhead. Therefore, novel architectural support is proposed to eliminate these overheads on future manycore systems. This architectural support minimally extends hardware structures already present in current processors, which allows further improvements in performance with negligible overhead. As a consequence, average improvements of up to 20.4% in execution time and 34.0% in EDP are obtained, outperforming state-of-the-art acceleration proposals not aware of task criticality.This work has been supported by the Spanish Government (grant SEV2015-0493, SEV-2011-00067 of the Severo Ochoa Program), by the Spanish Ministry of Science and Innovation (contracts TIN2015-65316, TIN2012-34557, TIN2013-46957-C2-2-P), by Generalitat de Catalunya (contracts 2014-SGR- 1051 and 2014-SGR-1272), by the RoMoL ERC Advanced Grant (GA 321253) and the European HiPEAC Network of Excellence. The Mont-Blanc project receives funding from the EU’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no 610402 and from the EU’s H2020 Framework Programme (H2020/2014-2020) under grant agreement no 671697. M. Moret´o has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047. M. Casas is supported by the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Cofund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union (Contract 2013 BP B 00243). E. Castillo has been partially supported by the Spanish Ministry of Education, Culture and Sports under grant FPU2012/2254.Peer ReviewedPostprint (author's final draft

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements

Near-Threshold Computing: Past, Present, and Future.

Transistor threshold voltages have stagnated in recent years, deviating from constant-voltage scaling theory and directly limiting supply voltage scaling. To overcome the resulting energy and power dissipation barriers, energy efficiency can be improved through aggressive voltage scaling, and there has been increased interest in operating at near-threshold computing (NTC) supply voltages. In this region sizable energy gains are achieved with moderate performance loss, some of which can be regained through parallelism. This thesis first provides a methodical definition of how near to threshold is "near threshold" and continues with an in-depth examination of NTC across past, present, and future CMOS technologies. By systematically defining near-threshold, the trends and tradeoffs are analyzed, lending insight in how best to design and optimize near-threshold systems. NTC works best for technologies that feature good circuit delay scalability, therefore technologies without strong short-channel effects. Early planar technologies (prior to 90nm or so) featured good circuit scalability (8x energy gains), but lacked area in which to add cores for parallelization. Recent planar nodes (32nm – 20nm) feature more area for cores but suffer from poor delay scalability, and so are not well-suited for NTC (4x energy gains). The switch to FinFET CMOS technology allows for a return to strong voltage scalability (8x gain), reversing trends seen in planar technologies, while dark silicon has created an opportunity to add cores for parallelization. Improved FinFET voltage scalability even allows for latency reduction of a single task, as long as the task is sufficiently parallelizable (< 10% serial code). Finally, we will look at a technique for fast voltage boosting, called Shortstop, in which a core's operating voltage is raised in 10s of cycles. Shortstop can be used to quickly respond to single-threaded performance demands of a near-threshold system by leveraging the innate parasitic inductance of a dedicated dirty supply rail, further improving energy efficiency. The technique is demonstrated in a wirebond implementation and is able to boost a core up to 1.8x faster than a header-based approach, while reducing supply droop by 2-7x. An improved flip-chip architecture is also proposed.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113600/1/npfet_1.pd

Nanophotonic Interconnect Architectures For Many-Core Microprocessors

Nanophotonics is an emerging technology that has the potential to improve the performance and energy consumption of inter- and intra-die communication in future chip multiprocessors. To date, the successful demonstration of a working large-scale system has been hampered by integration challenges and temperature sensitivity of the optical building blocks. Moreover, current approaches to interfacing with these devices are either CMOS incompatible or degrade the potential Tb/s modulation capability to only tens of Gb/s. At first glance it may seem like all of these challenges hint at today's nanophotonic devices being too impractical. However, using a combination of proposed solutions at the device and architectural level, a rich tradeoff space begins to emerge that is still largely untouched due to the knowledge gap between nanophotonic researchers on both sides of the spectrum. To this end, this dissertation attempts to fill this gap by targeting both device and system level research in an integrated fashion. We begin with an extended background and related work section that presents the relevant parameters and functionality of key optical devices for designing interconnection networks at the architecture level. Following this, we give a detailed discussion on the system level implications of optics including communication methods and summaries of recent network architectures for both on-chip and off-chip signaling with important takeaways for designing future systems. The lack of a comprehensive and accurate modeling strategy for optical com- ponents in the architecture community has lead to potentially inaccurate, and inflated, power and performance estimates. Since better representation of optical devices in architectural level simulations is essential to producing trustworthy results, we present a comprehensive, mathematical model for all of the major optical building blocks. To our knowledge, this is the first comprehensive model of all relevant optical devices specifically tailored to system level design for architects. An interesting aspect of architectural research in the field of optics is that there is not a natural progression of scaling parameters that will necessarily dictate future designs as is the case in CMOS. Because nanophotonics is an emerging technology, the potential is limitless for creating new devices that solve previous challenges. Optical packet switching is a promising approach for overcoming the performance and power limitations of bus-based on-chip networks. We present two variations of Phastlane, the first proposed nanophotonic packet switched architecture. In our evaluation, we demonstrate the potential improvements in system performance and power consumption across a range of modulator and receiver parameters. We also augment this analysis with projections for current optical devices using our mathematical device model. Finally, we propose alternatives for overcoming some of the limitations of both Phastlane architectures in the event that future optical components stagnate at current performance and power consumption. Also, we use our device model to explore a less aggressive approach to nanophotonics that judiciously combines electrical and optical interconnect

Active timing margin management to improve microprocessor power efficiency

Improving power/performance efficiency is critical for today’s micro- processors. From edge devices to datacenters, lower power or higher performance always produces better systems, measured by lower cost of ownership or longer battery time. This thesis studies improving microprocessor power/performance efficiency by optimizing the pipeline timing margin. In particular, this thesis focuses on improving the efficacy of Active Timing Margin, a young technology that dynamically adjusts the margin. Active timing margin trims down the pipeline timing margin with a control loop that adjusts voltage and frequency based on real-time chip environment monitoring. The key insight of this thesis is that in order to maximize active timing margin’s efficiency enhancement benefits, synergistic management from processor architecture design and system software scheduling are needed. To that end, this thesis covers the major consumers of pipeline timing margin, including temperature, voltage, and process variation. For temperature variation, the thesis proposes a table-lookup based active timing margin mechanism, and an associated temperature management scheme to minimize power consumption. For voltage variation, the thesis characterizes the limiting factors of adaptive clocking’s power saving and proposes application scheduling to maximize total system power reduction. For process variation, the thesis proposes core-level adaptive clocking reconfiguration to automatically expose inter-core variation and discusses workload scheduling and throttling management to control critical application performance. The author believes the optimization presented in this thesis can potentially benefit a variety of processor architectures as the conclusions are based on the solid measurement on state-of-the-art processors, and the research objective, active timing margin, already has wide applicability in the latest microprocessors by the time this thesis is written.Electrical and Computer Engineerin

Energy efficient core designs for upcoming process technologies

Energy efficiency has been a first order constraint in the design of micro processors for the last decade. As Moore's law sunsets, new technologies are being actively explored to extend the march in increasing the computational power and efficiency. It is essential for computer architects to understand the opportunities and challenges in utilizing the upcoming process technology trends in order to design the most efficient processors. In this work, we consider three process technology trends and propose core designs that are best suited for each of the technologies. The process technologies are expected to be viable over a span of timelines. We first consider the most popular method currently available to improve the energy efficiency, i.e. by lowering the operating voltage. We make key observations regarding the limiting factors in scaling down the operating voltage for general purpose high performance processors. Later, we propose our novel core design, ScalCore, one that can work in high performance mode at nominal Vdd, and in a very energy-efficient mode at low Vdd. The resulting core design can operate at much lower voltages providing higher parallel performance while consuming lower energy. While lowering Vdd improves the energy efficiency, CMOS devices are fundamentally limited in their low voltage operation. Therefore, we next consider an upcoming device technology -- Tunneling Field-Effect Transistors (TFETs), that is expected to supplement CMOS device technology in the near future. TFETs can attain much higher energy efficiency than CMOS at low voltages. However, their performance saturates at high voltages and, therefore, cannot entirely replace CMOS when high performance is needed. Ideally, we desire a core that is as energy-efficient as TFET and provides as much performance as CMOS. To reach this goal, we characterize the TFET device behavior for core design and judiciously integrate TFET units, CMOS units in a single core. The resulting core, called HetCore, can provide very high energy efficiency while limiting the slowdown when compared to a CMOS core. Finally, we analyze Monolithic 3D (M3D) integration technology that is widely considered to be the only way to integrate more transistors on a chip. We present the first analysis of the architectural implications of using M3D for core design and show how to partition the core across different layers. We also address one of the key challenges in realizing the technology, namely, the top layer performance degradation. We propose a critical path based partitioning for logic stages and asymmetric bit/port partitioning for storage stages. The result is a core that performs nearly as well as a core without any top layer slowdown. When compared to a 2D baseline design, an M3D core not only provides much higher performance, it also reduces the energy consumption at the same time. In summary, this thesis addresses one of the fundamental challenges in computer architecture -- overcoming the fact that CMOS is not scaling anymore. As we increase the computing power on a single chip, our ability to power the entire chip keeps decreasing. This thesis proposes three solutions aimed at solving this problem over different timelines. Across all our solutions, we improve energy efficiency without compromising the performance of the core. As a result, we are able to operate twice as many cores with in the same power budget as regular cores, significantly alleviating the problem of dark silicon

Aggressive undervolting of FPGAs : power & reliability trade-offs

In this work, we evaluate aggressive undervolting, i.e., voltage underscaling below the nominal level to reduce the energy consumption of Field Programmable Gate Arrays (FPGAs). Usually, voltage guardbands are added by chip vendors to ensure the worst-case process and environmental scenarios. Through experimenting on several FPGA architectures, we con¿rm a large voltage guardband for several FPGA components, which in turn, delivers signi¿cant power savings. However, further undervolting below the voltage guardband may cause reliability issues as the result of the circuit delay increase, and faults might start to appear. We extensively characterize the behavior of these faults in terms of the rate, location, type, as well as sensitivity to environmental temperature, primarily focusing on FPGA on-chip memories, or Block RAMs (BRAMs). Understanding this behavior can allow to deploy ef¿cient mitigation techniques, and in turn, FPGA-based designs can be improved for better energy, reliability, and performance trade-offs. Finally, as a case study, we evaluate a typical FPGA-based Neural Network (NN) accelerator when the FPGA voltage is underscaled. In consequence, the substantial NN energy savings come with the cost of NN accuracy loss. To attain power savings without NN accuracy loss below the voltage guardband gap, we proposed an application-aware technique and we also, evaluated the built-in Error-Correcting Code (ECC) mechanism. Hence, First, we developed an application-dependent BRAMs placement technique that relies on the deterministic behavior of undervolting faults, and mitigates these faults by mapping the most reliability sensitive NN parameters to BRAM blocks that are relatively more resistant to undervolting faults. Second, as a more general technique, we applied the built-in ECC of BRAMs and observed a signi¿cant fault coverage capability thanks to the behavior of undervolting faults, with a negligible power consumption overhead.En este trabajo, evaluamos el reducir el voltaje en forma agresiva, es decir, bajar la tensión por debajo del nivel nominal para reducir el consumo de energía en Field Programmable Gate Arrays (FPGA). Por lo general, los vendedores de chips establecen margen de seguridad al voltaje para garantizar el funcionamiento de los mismos en el peor de los casos y en los peores escenarios ambientales. Mediante la experimentación en varias arquitecturas FPGA, confirmamos que hay un margen de seguridad de voltaje grande en varios de los componentes de la FPGA, que a su vez, nos ofrece ahorros de energía significativos. Sin embargo, un trabajar a un voltaje por debajo del margen de seguridad del voltaje puede causar problemas de confiabilidad a medida ya que aumenta el retardo del circuito y pueden comenzar a aparecer fallos. Caracterizamos ampliamente el comportamiento de estos fallos en términos de velocidad, ubicación, tipo, así como la sensibilidad a la temperatura ambiental, centrándonos principalmente en memorias internas de la FPGA, o Block RAM (BRAM). Comprender este comportamiento puede permitir el desarrollo de técnicas eficientes de mitigación y, a su vez, mejorar los diseños basados en FPGA para obtener ahorros en energía, una mayor confiabilidad y un mayor rendimiento. Finalmente, como caso de estudio, evaluamos un acelerador típico de Redes Neuronales basado en FPGA cuando el voltaje de la FPGA esta por debajo del nivel mínimo de seguridad. En consecuencia, los considerables ahorros de energía de la red neuronal vienen asociados con la pérdida de precisión de la red neuronal. Para obtener ahorros de energía sin una pérdida de precisión en la red neuronal por debajo del margen de seguridad del voltaje, proponemos una técnica que tiene en cuenta la aplicación, asi mismo, evaluamos el mecanismo integrado en las BRAMs de Error Correction Code (ECC). Por lo tanto, en primer lugar, desarrollamos una técnica de colocación de BRAM dependiente de la aplicación que se basa en el comportamiento determinista de las fallos cuando la FPGA funciona por debajo del margen de seguridad, y se mitigan estos fallos asignando los parámetros de la red neuronal más sensibles a producir fallos a los bloques BRAM que son relativamente más resistentes a los fallos. En segundo lugar, como técnica más general, aplicamos el ECC incorporado de los BRAM y observamos una capacidad de cobertura de fallos significativo gracias a las características de comportamiento de fallos, con una sobrecoste de consumo de energía insignificantePostprint (published version

Aggressive and reliable high-performance architectures - techniques for thermal control, energy efficiency, and performance augmentation

As more and more transistors fit in a single chip, consumers of the electronics industry continue to expect decline in cost-per-function. Advancements in process technology offer steady improvements in system performance. The improvements manifest themselves as shrinking area, faster circuits and improved battery life. However, this migration toward sub-micro/nano-meter technologies presents a new set of challenges as the system becomes extremely sensitive to any voltage, temperature or process variations. One approach to immunize the system from the adverse effects of these variations is to add sufficient safety margins to the operating clock frequency of the system. Clearly, this approach is overly conservative because these worst case scenarios rarely occur. But, process technology in nanoscale era has already hit the power and frequency walls. Regardless of any of these challenges, the present processors not only need to run faster, but also cooler and use lesser energy. At a juncture where there is no further improvement in clock frequency is possible, data dependent latching through Timing Speculation (TS) provides a silver lining. Timing speculation is a widely known method for realizing better-than-worst-case systems. TS is aggressive in nature, where the mechanism is to dynamically tune the system frequency beyond the worst-case limits obtained from application characteristics to enhance the performance of system-on-chips (SoCs). However, such aggressive tuning has adverse consequences that need to be overcome. Power dissipation, on-chip temperature and reliability are key issues that cannot be ignored. A carefully designed power management technique combined with a reliable, controlled, aggressive clocking not only attempts to constrain power dissipation within a limit, but also improves performance whenever possible. In this dissertation, we present a novel power level switching mechanism by redefining the existing voltage-frequency pairs. We introduce an aggressive yet reliable framework for energy efficient thermal control. We were able to achieve up to 40% speed-up compared to a base scheme without overclocking. We compare our method against different schemes. We observe that up to 75% Energy-Delay squared product (ED2) savings relative to base architecture is possible. We showcase the loss of efficiency in present chip multiprocessor systems due to excess power supplied, and propose Utilization-aware Task Scheduling (UTS) - a power management scheme that increases energy efficiency of chip multiprocessors. Our experiments demonstrate that UTS along with aggressive timing speculation squeezes out maximum performance from the system without loss of efficiency, and breaching power & thermal constraints. From our evaluation we infer that UTS improves performance by up to 12% due to aggressive power level switching and over 50% in ED2 savings compared to traditional power management techniques. Aggressive clocking systems having TS as their central theme operate at a clock frequency range beyond specified safe limits, exploiting the data dependence on circuit critical paths. However, the margin for performance enhancement is restricted due to extreme difference between short paths and critical paths. In this thesis, we show that increasing the lengths of short paths of the circuit increases the margin of TS, leading to performance improvement in aggressively designed systems. We develop Min-arc algorithm to efficiently add delay buffers to selected short paths while keeping down the area penalty. We show that by using our algorithm, it is possible to increase the circuit contamination delay by up to 30% without affecting the propagation delay, with moderate area overhead. We also explore the possibility of increasing short path delays further by relaxing the constraint on propagation delay, and achieve even higher performance. Overall, we bring out the inter-relationship between power, temperature and reliability of aggressively clocked systems. Our main objective is to achieve maximal performance benefits and improved energy efficiency within thermal constraints by effectively combining dynamic frequency scaling, dynamic voltage scaling and reliable overclocking. We provide solutions to improve the existing power management in chip multiprocessors to dynamically maximize system utilization and satisfy the power constraints within safe thermal limits