Multibit delta sigma modulator with noise shaping dynamic element matching

Ph.DDOCTOR OF PHILOSOPH

Calibrated Continuous-Time Sigma-Delta Modulators

To provide more information mobility, many wireless communication systems such as WCDMA and EDGE in phone systems, bluetooth and WIMAX in communication networks have been recently developed. Recent efforts have been made to build the allin- one next generation device which integrates a large number of wireless services into a single receiving path in order to raise the competitiveness of the device. Among all the receiver architectures, the high-IF receiver presents several unique properties for the next generation receiver by digitalizing the signal at the intermediate frequency around a few hundred MHz. In this architecture, the modulation/demodulation schemes, protocols, equalization, etc., are all determined in a software platform that runs in the digital signal processor (DSP) or FPGA. The specifications for most of front-end building blocks are relaxed, except the analog-to-digital converter (ADC). The requirements of large bandwidth, high operational frequency and high resolution make the design of the ADC very challenging. Solving the bottleneck associated with the high-IF receiver architecture is a major focus of many ongoing research efforts. In this work, a 6th-order bandpass continuous time sigma-delta ADC with measured 68.4dB SNDR at 10MHz bandwidth to accommodate video applications is proposed. Tuned at 200 MHz, the fs/4 architecture employs an 800 MHz clock frequency. By making use of a unique software-based calibration scheme together with the tuning properties of the bandpass filters developed under the umbrella of this project, the ADC performance is optimized automatically to fulfill all requirements for the high-IF architecture. In a separate project, other critical design issues for continuous-time sigma-delta ADCs are addressed, especially the issues related to unit current source mismatches in multi-level DACs as well as excess loop delays that may cause loop instability. The reported solutions are revisited to find more efficient architectures. The aforementioned techniques are used for the design of a 25MHz bandwidth lowpass continuous-time sigma-delta modulator with time-domain two-step 3-bit quantizer and DAC for WiMAX applications. The prototype is designed by employing a level-to-pulse-width modulation (PWM) converter followed by a single-level DAC in the feedback path to translate the typical digital codes into PWM signals with the proposed pulse arrangement. Therefore, the non-linearity issue from current source mismatch in multi-level DACs is prevented. The jitter behavior and timing mismatch issue of the proposed time-based methods are fully analyzed. The measurement results of a chip prototype achieving 67.7dB peak SNDR and 78dB SFDR in 25MHz bandwidth properly demonstrate the design concepts and effectiveness of time-based quantization and feedback. Both continuous-time sigma-delta ADCs were fabricated in mainstream CMOS 0.18um technologies, which are the most popular in today?s consumer electronics industry

Low harmonic distortion flash A/D converters incorporating dynamic element matching techniques

New dynamic element matching techniques are shown to reduce the harmonic distortion and improve the spurious-free dynamic range of flash ADCs. Resistor chain mismatch errors are negated by randomly rearranging the resistors each sample by utilizing 5(2{dollar}\sp{b}{dollar}-1) digital switches and b + 1 random control signals for a b-bit flash ADC. The integral and differential nonlinearity of a non-ideal flash ADC are derived for three common resistor chain mismatch errors; namely, geometric mismatches, linear gradient mismatches, and dynamic mismatches. The transfer function of a non-ideal flash ADC is also derived and the converter output is shown to consist of a scaled copy of the input, a DC gain, and conversion noise that is a function of the resistor mismatches. A comprehensive summary of dynamic element matching techniques given in literature is provided. In addition, the DEM network introduced by Galton and Jensen is shown to be equivalent to the generalized-cube network used in parallel processing architectures. An alternative version of this network that uses logic gates is also proposed

Design Considerations for Wide Bandwidth Continuous-Time Low-Pass Delta-Sigma Analog-to-Digital Converters

Continuous-time (CT) delta-sigma (ΔΣ) analog-to-digital converters (ADC) have emerged as the popular choice to achieve high resolution and large bandwidth due to their low cost, power efficiency, inherent anti-alias filtering and digital post processing capabilities. This work presents a detailed system-level design methodology for a low-power CT ΔΣ ADC. Design considerations and trade-offs at the system-level are presented. A novel technique to reduce the sensitivity of the proposed ADC to clock jitter-induced feedback charge variations by employing a hybrid digital-to-analog converter (DAC) based on switched-capacitor circuits is also presented. The proposed technique provides a clock jitter tolerance of up to 5ps (rms). The system is implemented using a 5th order active-RC loop filter, 9-level quantizer and DAC, achieving 74dB SNDR over 20MHz signal bandwidth, at 400MHz sampling frequency in a 1.2V, 90 nm CMOS technology. A novel technique to improve the linearity of the feedback digital-to-analog converters (DAC) in a target 11-bits resolution, 100MHz bandwidth, 2GHz sampling frequency CT ΔΣ ADC is also presented in this work. DAC linearity is improved by combining dynamic element matching and automatic background calibration to achieve up to 18dB improvement in the SNR. Transistor-level circuit implementation of the proposed technique was done in a 1.8V, 0.18μm BiCMOS process

Low-cost, high-precision DAC design based on ordered element matching and verification against undesired operating points for analog circuits

Over the past 50 years, the integrated circuit (IC) industry has grown rapidly, following the famous ``Moore\u27s law. The process feature size keeps shrinking, whereby the performance of digital circuits is constantly enhanced and their cost constantly decreases. However, with the system integration and the development of system on chip (SoC), nearly all of today\u27s ICs contain analog/mixed-Signal circuits. Although a mixed-signal SoC is primarily digital, the analog circuit design and verification consume most of the resources, and the dominant source of IC breakdowns is attributable to the analog circuits. One important reason for the high cost and risk of breakdowns of analog circuits is that the technology advancement does not benefit many analog and mixed-signal circuits, and in fact imposes higher requirements on their performance. With process scaling, many important parameters of integrated circuit components degrade, which cause a drop in many key aspects of performance of analog circuits. Many analog circuits rely on matched circuit components (transistors, resistors, or capacitors) to achieve the required linearity performance; examples are amplifiers, digital-to-analog converters (DACs), etc. However, shrinking of the feature sizes increases the circuit components mismatch, thereby making it more difficult to maintain circuit accuracy. Therefore, to reduce the cost of analog circuit design, designers should propose new structures whose key performance can be improved by the technology scaling. In this dissertation, we propose a low-cost, high-precision DAC structure based on ordered element matching (OEM) theory. High matching accuracy can be achieved by applying OEM calibration to the resistors in unary weighted segments and calibrating the gain error between different segments by calibration DAC (CalDAC). As a design example to verify the proposed structure, a high-precision DAC is designed in a 130 nm Global Foundry (GF) CMOS process. The 130 nm GF process features high-density digital circuits and is a typical process which is constantly enhanced by the scaling of device dimensions and voltage supply; implementation of a high-precision DAC in such process is important to decreasing the costs of high-precision DAC designs. As a result, our proposed DAC structure is demonstrated to be able to significantly lower the cost of high-precision DAC design. Another reason for the high cost and risk of breakdowns of analog circuits arises from the complexity of analog circuit working states. Most digital circuits serve as logic functions, so that digital transistors work in only two states, either low or high. In contrast, analog circuits have much more complicated functions; they may work in multiple operating points, since various feedback approaches are applied in analog circuits to enhance their performance. Circuits with undetected operating points can be devastating, particularly when they are employed in critical applications such as automotive, health care, and military products. However, since the existing circuit simulators provide only a single operating point, recognizing the existence of undesired operating points depends largely on the experiences of designers. In some circuits, even the most experienced designers may not be aware that a circuit they designed has undesired operating points, which often go undetected in the standard simulations in the design process. To identify undesired operating points in an analog circuit and reduce its risk of breakdowns, a systematic verification method against undesired operating points in analog circuits is proposed in this dissertation. Unlike traditional methods of finding all operating points, this method targets only searches for voltage intervals containing undesired operating points. To achieve this, our method first converts the circuit into a corresponding graph and locates the break point to break all the positive feedback loops (PFLs). For one dimensional verification, divide and contraction algorithms could be applied to identify undesired operating points. Two dimensional vector field methods are used to solve the two dimensional verifications. Based on the proposed verification methods against undesired operating points, an EDA tool called ``ITV is developed to identify undesired operating points in analog and mixed-signal circuits. Simulation results show ITV to be effective and efficient in identifying undesired operating points in a class of commonly used benchmark circuits that includes bias generators, voltage references, temperature sensors, and op-amp circuits

On-Chip Analog Circuit Design Using Built-In Self-Test and an Integrated Multi-Dimensional Optimization Platform

Nowadays, the rapid development of system-on-chip (SoC) market introduces tremendous complexity into the integrated circuit (IC) design. Meanwhile, the IC fabrication process is scaling down to allow higher density of integration but makes the chips more sensitive to the process-voltage-temperature (PVT) variations. A successful IC product not only imposes great pressure on the IC designers, who have to handle wider variations and enforce more design margins, but also challenges the test procedure, leading to more check points and longer test time. To relax the designers’ burden and reduce the cost of testing, it is valuable to make the IC chips able to test and tune itself to some extent. In this dissertation, a fully integrated in-situ design validation and optimization (VO) hardware for analog circuits is proposed. It implements in-situ built-in self-test (BIST) techniques for analog circuits. Based on the data collected from BIST, the error between the measured and the desired performance of the target circuit is evaluated using a cost function. A digital multi-dimensional optimization engine is implemented to adaptively adjust the analog circuit parameters, seeking the minimum value of the cost function and achieving the desired performance. To verify this concept, study cases of a 2nd/4th active-RC band-pass filter (BPF) and a 2nd order Gm-C BPF, as well as all BIST and optimization blocks, are adopted on-chip. Apart from the VO system, several improved BIST techniques are also proposed in this dissertation. A single-tone sinusoidal waveform generator based on a finite-impulse-response (FIR) architecture, which utilizes an optimization algorithm to enhance its spur free dynamic range (SFDR), is proposed. It achieves an SFDR of 59 to 70 dBc from 150 to 850 MHz after the optimization procedure. A low-distortion current-steering two-tone sinusoidal signal synthesizer based on a mixing-FIR architecture is also proposed. The two-tone synthesizer extends the FIR architecture to two stages and implements an up-conversion mixer to generate the two tones, achieving better than -68 dBc IM3 below 480 MHz LO frequency without calibration. Moreover, an on-chip RF receiver linearity BIST methodology for continuous and discrete-time hybrid baseband chain is proposed. The proposed receiver chain implements a charge-domain FIR filter to notch the two excitation signals but expose the third order intermodulation (IM3) tones. It simplifies the linearity measurement procedure–using a power detector is enough to analyze the receiver’s linearity. Finally, a low cost fully digital built-in analog tester for linear-time-invariant (LTI) analog blocks is proposed. It adopts a time-to-digital converter (TDC) to measure the delays corresponded to a ramp excitation signal and is able to estimate the pole or zero locations of a low-pass LTI system

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

CONCEPTUAL DESIGN REPORT

Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories