A Simple Method for Dynamic Scheduling in a Heterogeneous Computing System

A simple method for the dynamic scheduling on a heterogeneous computing system is proposed in this paper. It was implemented to minimize the parallel program execution time. The proposed method decomposes the program workload into computationally homogeneous subtasks, which may be of the different size, depending on the current load of each machine in a heterogeneous computing system

CSP channels for CAN-bus connected embedded control systems

Closed loop control system typically contains multitude of sensors and actuators operated simultaneously. So they are parallel and distributed in its essence. But when mapping this parallelism to software, lot of obstacles concerning multithreading communication and synchronization issues arise. To overcome this problem, the CT kernel/library based on CSP algebra has been developed. This project (TES.5410) is about developing communication extension to the CT library to make it applicable in distributed systems. Since the library is tailored for control systems, properties and requirements of control systems are taken into special consideration. Applicability of existing middleware solutions is examined. A comparison of applicable fieldbus protocols is done in order to determine most suitable ones and CAN fieldbus is chosen to be first fieldbus used. Brief overview of CSP and existing CSP based libraries is given. Middleware architecture is proposed along with few novel ideas

Framework for simulation of fault tolerant heterogeneous multiprocessor system-on-chip

Due to the ever growing requirement in high performance data computation, current Uniprocessor systems fall short of hand to meet critical real-time performance demands in (i) high throughput (ii) faster processing time (iii) low power consumption (iv) design cost and time-to-market factors and more importantly (v) fault tolerant processing. Shifting the design trend to MPSOCs is a work-around to meet these challenges. However, developing efficient fault tolerant task scheduling and mapping techniques requires optimized algorithms that consider the various scenarios in Multiprocessor environments. Several works have been done in the past few years which proposed simulation based frameworks for scheduling and mapping strategies that considered homogenous systems and error avoidance techniques. However, most of these works inadequately describe today\u27s MPSOC trend because they were focused on the network domain and didn\u27t consider heterogeneous systems with fault tolerant capabilities; In order to address these issues, this work proposes (i) a performance driven scheduling algorithm (PD SA) based on simulated annealing technique (ii) an optimized Homogenous-Workload-Distribution (HWD) Multiprocessor task mapping algorithm which considers the dynamic workload on processors and (iii) a dynamic Fault Tolerant (FT) scheduling/mapping algorithm to employ robust application processing system. The implementation was accompanied by a heterogeneous Multiprocessor system simulation framework developed in systemC/C++. The proposed framework reads user data, set the architecture, execute input task graph and finally generate performance variables. This framework alleviates previous work issues with respect to (i) architectural flexibility in number-of-processors, processor types and topology (ii) optimized scheduling and mapping strategies and (iii) fault-tolerant processing capability focusing more on the computational domain; A set of random as well as application specific STG benchmark suites were run on the simulator to evaluate and verify the performance of the proposed algorithms. The simulations were carried out for (i) scheduling policy evaluation (ii) fault tolerant evaluation (iii) topology evaluation (iv) Number of processor evaluation (v) Mapping policy evaluation and (vi) Processor Type evaluation. The results showed that PD scheduling algorithm showed marginally better performance than EDF with respect to utilization, Execution-Time and Power factors. The dynamic Fault Tolerant implementation showed to be a viable and efficient strategy to meet real-time constraints without posing significant system performance degradation. Torus topology gave better performance than Tile with respect to task completion time and power factors. Executing highly heterogeneous Tasks showed higher power consumption and execution time. Finally, increasing the number of processors showed a decrease in average Utilization but improved task completion time and power consumption; Based on the simulation results, the system designer can compare tradeoffs between a various design choices with respect to the performance requirement specifications. In general, designing an optimized Multiprocessor scheduling and mapping strategy with added fault tolerant capability will enable to develop efficient Multiprocessor systems which meet future performance goal requirements. This is the substance of this work

Proactive and Dynamic Task Scheduling in Fog-cloud Environment

Fog computing was introduced for the first time by Cisco in 2012. Since then, there has been a great number of studies on fog computing, in which vacant and free-of-charge computing resources in local networks provide low-latency services to end devices. Even though traditional architecture with scalable and powerful central servers in cloud can accommodate those tasks, it is costly to allocate resources in cloud to execute all those tasks. In addition, it falls short of satisfying Quality of Service (QoS) requirements in terms of waiting time because of long distance communication between servers and user end devices. In this thesis, we discuss dynamic scheduling problem in fog-cloud collaboration environment for real-time applications when QoS is strict and when an answer is useless if the corresponding application finishes its execution after a pre-defined deadline. By taking into account an admission control procedure to grant only requests whose deadline requirements are feasible with respect to the available resources in the network, we study a proactive scenario using different strategies to calculate schedules and to assign resources, within the admission control procedure to accommodate an incoming request. Then, we propose our heuristic with four variants corresponding to four different strategies, with the adjustment of a trade-off cost-makespan factor in an utility function. When evaluating performance with some baseline methods in such proactive scenario, the numerical results show that our variants can meet deadline requirements for more applications while exploiting more efficiently the resources in the fog layer and being charged less for using cloud. Keywords: fog computing, cloud computing, dynamic scheduling, real-time scheduling, task scheduling, workflow applications, DAG, QoS requirements, heterogeneous systems

Scheduling Techniques for Operating Systems for Medical and IoT Devices: A Review

Software and Hardware synthesis are the major subtasks in the implementation of hardware/software systems. Increasing trend is to build SoCs/NoC/Embedded System for Implantable Medical Devices (IMD) and Internet of Things (IoT) devices, which includes multiple Microprocessors and Signal Processors, allowing designing complex hardware and software systems, yet flexible with respect to the delivered performance and executed application. An important technique, which affect the macroscopic system implementation characteristics is the scheduling of hardware operations, program instructions and software processes. This paper presents a survey of the various scheduling strategies in process scheduling. Process Scheduling has to take into account the real-time constraints. Processes are characterized by their timing constraints, periodicity, precedence and data dependency, pre-emptivity, priority etc. The affect of these characteristics on scheduling decisions has been described in this paper

Optimizing Network Performance of Computing Pipelines in Distributed Environments

Supporting high performance computing pipelines over wide-area networks is critical to enabling large-scale distributed scientific applications that require fast responses for interactive operations or smooth flows for data streaming. We construct analytical cost models for computing modules, network nodes, and communication links to estimate the computing times on nodes and the data transport times over connections. Based on these time estimates, we present the Efficient Linear Pipeline Configuration method based on dynamic programming that partitions the pipeline modules into groups and strategically maps them onto a set of selected computing nodes in a network to achieve minimum end-to-end delay or maximum frame rate. We implemented this method and evaluated its effectiveness with experiments on a large set of simulated application pipelines and computing networks. The experimental results show that the proposed method outperforms the Streamline and Greedy algorithms. These results, together with polynomial computational complexity, make our method a potential scalable solution for large practical deployments