Multiprocessor System-on-Chips based Wireless Sensor Network Energy Optimization

Wireless Sensor Network (WSN) is an integrated part of the Internet-of-Things (IoT) used to monitor the physical or environmental conditions without human intervention. In WSN one of the major challenges is energy consumption reduction both at the sensor nodes and network levels. High energy consumption not only causes an increased carbon footprint but also limits the lifetime (LT) of the network. Network-on-Chip (NoC) based Multiprocessor System-on-Chips (MPSoCs) are becoming the de-facto computing platform for computationally extensive real-time applications in IoT due to their high performance and exceptional quality-of-service. In this thesis a task scheduling problem is investigated using MPSoCs architecture for tasks with precedence and deadline constraints in order to minimize the processing energy consumption while guaranteeing the timing constraints. Moreover, energy-aware nodes clustering is also performed to reduce the transmission energy consumption of the sensor nodes. Three distinct problems for energy optimization are investigated given as follows: First, a contention-aware energy-efficient static scheduling using NoC based heterogeneous MPSoC is performed for real-time tasks with an individual deadline and precedence constraints. An offline meta-heuristic based contention-aware energy-efficient task scheduling is developed that performs task ordering, mapping, and voltage assignment in an integrated manner. Compared to state-of-the-art scheduling our proposed algorithm significantly improves the energy-efficiency. Second, an energy-aware scheduling is investigated for a set of tasks with precedence constraints deploying Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs. A novel population based algorithm called ARSH-FATI is developed that can dynamically switch between explorative and exploitative search modes at run-time. ARSH-FATI performance is superior to the existing task schedulers developed for homogeneous VFI-NoC-MPSoCs. Third, the transmission energy consumption of the sensor nodes in WSN is reduced by developing ARSH-FATI based Cluster Head Selection (ARSH-FATI-CHS) algorithm integrated with a heuristic called Novel Ranked Based Clustering (NRC). In cluster formation parameters such as residual energy, distance parameters, and workload on CHs are considered to improve LT of the network. The results prove that ARSH-FATI-CHS outperforms other state-of-the-art clustering algorithms in terms of LT.University of Derby, Derby, U

Contention energy-aware real-time task mapping on NoC based heterogeneous MPSoCs

© 2018 IEEE. Network-on-Chip (NoC)-based multiprocessor system-on-chips (MPSoCs) are becoming the de-facto computing platform for computationally intensive real-time applications in the embedded systems due to their high performance, exceptional quality-of-service (QoS) and energy efficiency over superscalar uniprocessor architectures. Energy saving is important in the embedded system because it reduces the operating cost while prolongs lifetime and improves the reliability of the system. In this paper, contention-aware energy efficient static mapping using NoC-based heterogeneous MPSoC for real-time tasks with an individual deadline and precedence constraints is investigated. Unlike other schemes task ordering, mapping, and voltage assignment are performed in an integrated manner to minimize the processing energy while explicitly reduce contention between the communications and communication energy. Furthermore, both dynamic voltage and frequency scaling and dynamic power management are used for energy consumption optimization. The developed contention-aware integrated task mapping and voltage assignment (CITM-VA) static energy management scheme performs tasks ordering using earliest latest finish time first (ELFTF) strategy that assigns priorities to the tasks having shorter latest finish time (LFT) over the tasks with longer LFT. It remaps every task to a processor and/or discrete voltage level that reduces processing energy consumption. Similarly, the communication energy is minimized by assigning discrete voltage levels to the NoC links. Further, total energy efficiency is achieved by putting the processor into a low-power state when feasible. Moreover, this approach resolves the contention between communications that traverse the same link by allocating links to communications with higher priority. The results obtained through extensive simulations of real-world benchmarks demonstrate that CITM-VA approach outperforms state-of-the-art technique and achieves an average 30% total energy improvement. Additionally, it maintains high QoS and robustness for real-time applications

Energy-aware scheduling of streaming applications on edge-devices in IoT based healthcare

The reliance on Network-on-Chip (NoC) based Multiprocessor Systems-on-Chips (MPSoCs) is proliferating in modern embedded systems to satisfy the higher performance requirement of multimedia streaming applications. Task level coarse grained software pipeling also called re-timing when combined with Dynamic Voltage and Frequency Scaling (DVFS) has shown to be an effective approach in significantly reducing energy consumption of the multiprocessor systems at the expense of additional delay. In this paper we develop a novel energy-aware scheduler considering tasks with conditional constraints on Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs deploying re-timing integrated with DVFS for real-time streaming applications. We propose a novel task level re-timing approach called R-CTG and integrate it with non linear programming based scheduling and voltage scaling approach referred to as ALI-EBAD. The R-CTG approach aims to minimize the latency caused by re-timing without compromising on energy-efficiency. Compared to R-DAG, the state-of-the-art approach designed for traditional Directed Acyclic Graph (DAG) based task graphs, R-CTG significantly reduces the re-timing latency because it only re-times tasks that free up the wasted slack. To validate our claims we performed experiments on using 12 real benchmarks, the results demonstrate that ALI-EBAD out performs CA-TMES-Search and CA-TMES-Quick task schedulers in terms of energy-efficiency.N/

Contention & Energy-aware Real-time Task Mapping on NoC based Heterogeneous MPSoCs

Network-on-Chip (NoC)-based multiprocessor system-on-chips (MPSoCs) are becoming the de-facto computing platform for computationally intensive real-time applications in the embedded systems due to their high performance, exceptional quality-of-service (QoS) and energy efficiency over superscalar uniprocessor architectures. Energy saving is important in the embedded system because it reduces the operating cost while prolongs lifetime and improves the reliability of the system. In this paper, contention-aware energy efficient static mapping using NoC-based heterogeneous MPSoC for real-time tasks with an individual deadline and precedence constraints is investigated. Unlike other schemes task ordering, mapping, and voltage assignment are performed in an integrated manner to minimize the processing energy while explicitly reduce contention between the communications and communication energy. Furthermore, both dynamic voltage and frequency scaling and dynamic power management are used for energy consumption optimization. The developed contention-aware integrated task mapping and voltage assignment (CITM-VA) static energy management scheme performs tasks ordering using earliest latest finish time first (ELFTF) strategy that assigns priorities to the tasks having shorter latest finish time (LFT) over the tasks with longer LFT. It remaps every task to a processor and/or discrete voltage level that reduces processing energy consumption. Similarly, the communication energy is minimized by assigning discrete voltage levels to the NoC links. Further, total energy efficiency is achieved by putting the processor into a low-power state when feasible. Moreover, this approach resolves the contention between communications that traverse the same link by allocating links to communications with higher priority. The results obtained through extensive simulations of real-world benchmarks demonstrate that CITM-VA approach outperforms state-of-the-art technique and achieves an average ~30%..

DESIGN METHODOLOGIES FOR RELIABLE AND ENERGY-EFFICIENT MULTIPROCESSOR SYSTEM

Ph.DDOCTOR OF PHILOSOPH

Self-adaptivity of applications on network on chip multiprocessors: the case of fault-tolerant Kahn process networks

Technology scaling accompanied with higher operating frequencies and the ability to integrate more functionality in the same chip has been the driving force behind delivering higher performance computing systems at lower costs. Embedded computing systems, which have been riding the same wave of success, have evolved into complex architectures encompassing a high number of cores interconnected by an on-chip network (usually identified as Multiprocessor System-on-Chip). However these trends are hindered by issues that arise as technology scaling continues towards deep submicron scales. Firstly, growing complexity of these systems and the variability introduced by process technologies make it ever harder to perform a thorough optimization of the system at design time. Secondly, designers are faced with a reliability wall that emerges as age-related degradation reduces the lifetime of transistors, and as the probability of defects escaping post-manufacturing testing is increased. In this thesis, we take on these challenges within the context of streaming applications running in network-on-chip based parallel (not necessarily homogeneous) systems-on-chip that adopt the no-remote memory access model. In particular, this thesis tackles two main problems: (1) fault-aware online task remapping, (2) application-level self-adaptation for quality management. For the former, by viewing fault tolerance as a self-adaptation aspect, we adopt a cross-layer approach that aims at graceful performance degradation by addressing permanent faults in processing elements mostly at system-level, in particular by exploiting redundancy available in multi-core platforms. We propose an optimal solution based on an integer linear programming formulation (suitable for design time adoption) as well as heuristic-based solutions to be used at run-time. We assess the impact of our approach on the lifetime reliability. We propose two recovery schemes based on a checkpoint-and-rollback and a rollforward technique. For the latter, we propose two variants of a monitor-controller- adapter loop that adapts application-level parameters to meet performance goals. We demonstrate not only that fault tolerance and self-adaptivity can be achieved in embedded platforms, but also that it can be done without incurring large overheads. In addressing these problems, we present techniques which have been realized (depending on their characteristics) in the form of a design tool, a run-time library or a hardware core to be added to the basic architecture

06141 Abstracts Collection -- Dynamically Reconfigurable Architectures

From 02.04.06 to 07.04.06, the Dagstuhl Seminar 06141 ``Dynamically Reconfigurable Architectures\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available

Resource Optimized Scheduling For Enhanced Power Efficiency And Throughput On Chip Multi Processor Platforms

The parallel nature of process execution on Chip Multi-Processors (CMPs) has boosted levels of application performance far beyond the capabilities of erstwhile single-core designs. Generally, CMPs offer improved performance by integrating multiple simpler cores onto a single die that share certain computing resources among them such as last-level caches, data buses, and main memory. This ensures architectural simplicity while also boosting performance for multi-threaded applications. However, a major trade-off associated with this approach is that concurrently executing applications incur performance degradation if their collective resource requirements exceed the total amount of resources available to the system. If dynamic resource allocation is not carefully considered, the potential performance gain from having multiple cores may be outweighed by the losses due to contention for allocation of shared resources. Additionally, CMPs with inbuilt dynamic voltage-frequency scaling (DVFS) mechanisms may try to compensate for the performance bottleneck by scaling to higher clock frequencies. For performance degradation due to shared-resource contention, this does not necessarily improve performance but does ensure a significant penalty on power consumption due to the quadratic relation of electrical power and voltage (P_dynamic ∝ V^2 * f).This dissertation presents novel methodologies for balancing the competing requirements of high performance, fairness of execution, and enforcement of priority, while also ensuring overall power efficiency of CMPs. Specifically, we (1) Analyze the problem of resource interference during concurrent process execution and propose two fine-grained scheduling methodologies for improving overall performance and fairness, (2) Develop an approach for enforcement of priority (i.e., minimum performance) for specific processes while avoiding resource starvation for others, and (3) Present a machine-learning approach for maximizing the power efficiency (performance-per-Watt) of CMPs through estimation of a workload\u27s performance and power consumption limits at different clock frequencies.As modern computing workloads become increasingly dynamic, and computers themselves become increasingly ubiquitous, the problem of finding the ideal balance between performance and power consumption of CMPs is of particular relevance today, especially given the unprecedented proliferation of embedded devices for use in Internet-of-Things, edge computing, smart wearables, and even exotic experiments such as space probes comprised entirely of a CMP, sensors, and an antenna ( space chips ). Additionally, reducing power consumption while maintaining constant performance can contribute to addressing the growing problem of dark silicon