The impact of inter-vehicle communication on vehicular traffic

The work addresses communication networks established over radio equipped vehicles in our everyday road traffic, so called Vehicular Ad Hoc Networks (VANETs), and discusses their impact on two major goals, namely traffic safety and traffic efficiency. For both objectives, the thesis proposes an appropriate modeling of the essential building blocks Traffic, Communication and Application and enables impact assessment studies by means of implemented simulation tools

Fog Connectivity Clustering and MDP Modeling for Software-defined Vehicular Networks

Intelligent and networked vehicles cooperate to create a mobile Cloud through vehicular Fog computing (VFC). Such clouds rely heavily on the underlying vehicular networks, so estimating communication resilience allows to address the problems caused by intermittent vehicle connectivity for data transfers. Individually estimating the communication stability of vehicles, nevertheless, undergoes incorrect predictions due to their particular mobility patterns. Therefore, we provide a region-oriented fog management model based on the connectivity through vehicular heterogeneous network environment via V2X and C-V2X. A fog management strategy dynamically monitors nearby vehicles to determine distinct regions in urban centres. The model enables a software-defined vehicular network (\Gls{SDVN}) controller to coordinate data flows. The vehicular connectivity described by our model assesses the potential for vehicle communication and conducts dynamic vehicle clustering. From the stochasticity of the environment, our model is based on Markov Decision Process (MDP), tracking the status of vehicle clusters and their potential for provisioning services. The model for vehicular clustering is supported by 5G and DSRC heterogeneous networks. Simulated analyses have shown the capability of our proposed model to estimate cluster reliability in real-time urban scenarios and support effective vehicular fog management

Reliability and Efficiency of Vehicular Network Applications

The DSRC/WAVE initiative is forecast to enable a plethora of applications, classified in two broad types of safety and non-safety applications. In the former type, the reliability performance is of tremendous prominence while, in the latter case, the efficiency of information dissemination is the key driving factor. For safety applications, we adopt a systematic approach to analytically investigate the reliability of the communication system in a symbiotic relationship with the host system comprising a vehicular traffic system and radio propagation environment. To this aim, the¬ interference factor is identified as the central element of the symbiotic relationship. Our approach to the investigation of interference and its impacts on the communication reliability departs from previous studies by the degree of realism incorporated in the host system model. In one dimension, realistic traffic models are developed to describe the vehicular traffic behaviour. In a second dimension, a realistic radio propagation model is employed to capture the unique signal propagation aspects of the host system. We address the case of non-safety applications by proposing a generic framework as a capstone architecture for the development of new applications and the efficiency evaluation of existing ones. This framework, while being independent from networking technology, enables accurate characterization of the various information dissemination tasks that a node performs in cooperation with others. As the central element of the framework, we propose a game theoretic model to describe the interaction of meeting nodes aiming to exchange information of mutual or social interests. An adaptive mechanism is designed to enable a mobile node to measure the social significance of various information topics, which is then used by the node to prioritize the forwarding of information objects

Performance modelling of adaptive VANET with enhanced priority scheme

In this paper, we present an analytical and simulated study on the performance of adaptive vehicular ad hoc networks (VANET) priority based on Transmission Distance Reliability Range (TDRR) and data type. VANET topology changes rapidly due to its inherent nature of high mobility nodes and unpredictable environments. Therefore, nodes in VANET must be able to adapt to the ever changing environment and optimize parameters to enhance performance. However, there is a lack of adaptability in the current VANET scheme. Existing VANET IEEE802.11p’s Enhanced Distributed Channel Access; EDCA assigns priority solely based on data type. In this paper, we propose a new priority scheme which utilizes Markov model to perform TDRR prediction and assign priorities based on the proposed Markov TDRR Prediction with Enhanced Priority VANET Scheme (MarPVS). Subsequently, we performed an analytical study on MarPVS performance modeling. In particular, considering five different priority levels defined in MarPVS, we derived the probability of successful transmission, the number of low priority messages in back off process and concurrent low priority transmission. Finally, the results are used to derive the average transmission delay for data types defined in MarPVS. Numerical results are provided along with simulation results which confirm the accuracy of the proposed analysis. Simulation results demonstrate that the proposed MarPVS results in lower transmission latency and higher packet success rate in comparison with the default IEEE802.11p scheme and greedy scheduler scheme

Building Realistic Mobility Models for Mobile Ad Hoc Networks

A mobile ad hoc network (MANET) is a self-configuring wireless network in which each node could act as a router, as well as a data source or sink. Its application areas include battlefields and vehicular and disaster areas. Many techniques applied to infrastructure-based networks are less effective in MANETs, with routing being a particular challenge. This paper presents a rigorous study into simulation techniques for evaluating routing solutions for MANETs with the aim of producing more realistic simulation models and thereby, more accurate protocol evaluations. MANET simulations require models that reflect the world in which the MANET is to operate. Much of the published research uses movement models, such as the random waypoint (RWP) model, with arbitrary world sizes and node counts. This paper presents a technique for developing more realistic simulation models to test and evaluate MANET protocols. The technique is animation, which is applied to a realistic scenario to produce a model that accurately reflects the size and shape of the world, node count, movement patterns, and time period over which the MANET may operate. The animation technique has been used to develop a battlefield model based on established military tactics. Trace data has been used to build a model of maritime movements in the Irish Sea. Similar world models have been built using the random waypoint movement model for comparison. All models have been built using the ns-2 simulator. These models have been used to compare the performance of three routing protocols: dynamic source routing (DSR), destination-sequenced distance-vector routing (DSDV), and ad hoc n-demand distance vector routing (AODV). The findings reveal that protocol performance is dependent on the model used. In particular, it is shown that RWP models do not reflect the performance of these protocols under realistic circumstances, and protocol selection is subject to the scenario to which it is applied. To conclude, it is possible to develop a range of techniques for modelling scenarios applicable to MANETs, and these simulation models could be utilised for the evaluation of routing protocols

Performance improvement in mobile ad-hoc networks.

The objective of this research is to enhance the network performance under realistic mobile ad-hoc networks environments without modification of the standard. Overview of this research is summarized as follows: First, a packet-fragmentation technique to improve network throughput under the worst channel conditions is proposed. While the conventional packet-fragmentation technique research focuses only on random-bit errors, the proposed technique employs both random bit errors and hidden-node collisions. The analytical models based on Markov-chain model shows that the optimal fragmentation technique can effectively reduce the number of retransmissions caused by both collisions from hidden nodes and corrupted packets by random bit errors, and eventually improving throughput in noisy VANETs channels. As a second contribution, a dynamic service-channel allocation (DSCA) scheme is proposed to maximize the network throughput by dynamically assigning different service channels to the users. The theoretical analysis in this thesis will consider wireless access in the vehicular environment (WAVE) protocol, which is the main characteristic of the vehicular ad-hoc networks standard (the IEEE 802.11p). To summarize, the main contribution of this research is that two schemes will improve the network throughput significantly without modification of the standard. Therefore, there is no implementation issue to deploy the proposed schemes in real devices.PhDCommittee Chair: Copeland, John; Committee Co-Chair: Chang, Yusun; Committee Member: Ammar, Mostafa; Committee Member: Beyah, Raheem; Committee Member: Owen, Henry; Committee Member: Taylor, Davi

Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems

[EN] Intelligent Transportation Systems (ITS) can make transportation safer, more efficient, and more sustainable by applying various information and communication technologies. One of these technologies are \acfp{VN}. \acp{VN} combine different communication solutions such as cellular networks, \acfp{VANET}, or IEEE 802.11 technologies to provide connectivity among vehicles, and between vehicles and road infrastructure. This thesis focuses on VNs, and considers that the high speed of the nodes and the presence of obstacles like buildings, produces a highly variable network topology, as well as more frequent partitions in the network. Therefore, classical \ac{MANET} protocols do not adapt well to VANETs. Under these conditions, \ac{DTN} have been proposed as an alternative able to cope with these adverse characteristics. In DTN, when a message cannot be routed to its destination, it is not immediately dropped but it is instead stored and carried until a new route becomes available. The combination of VN and DTN is called \acp{VDTN}. In this thesis, we propose a new VDTN protocol designed to collect information from vehicular sensors. Our proposal, called \ac{MSDP}, combines information about the localization obtained from a GNSS system with the actual street/road layout obtained from a Navigation System (NS) to define a new routing metric. Both analytical and simulation results prove that MSDP outperforms previous proposals. Concerning the deployment of VNs and VANET technologies, technology already left behind the innovation and the standardization phases, and it is about time it reach the first early adopters in the market. However, most car manufacturers have decided to implement VN devices in the form of On Board Units (OBUs), which are expensive, heavily manufacturer dependent, and difficult to upgrade. These facts are delaying the deployment of VN. To boost this process, we have developed the GRCBox architecture. This architecture is based on low-cost devices and enables the establishment of V2X, \emph{i.e.} V2I and V2V, communications while integrating users by easing the use of general purpose devices like smartphones, tablets or laptops. To demonstrate the viability of the GRCBox architecture, we combined it with a DTN platform called Scampi to obtain actual results over a real VDTN scenario. We also present several GRCBox-aware applications that illustrate how developers can create applications that bring the potential of VN to user devices.[ES] Los sistemas de transporte inteligente (ITS) son el soporte para el establecimiento de un transporte más seguro, más eficiente y más sostenible mediante el uso de tecnologías de la información y las comunicaciones. Una de estas tecnologías son las redes vehiculares (VNs). Las VNs combinan diferentes tecnologías de comunicación como las redes celulares, las redes ad-hoc vehiculares (VANETs) o las redes 802.11p para proporcionar conectividad entre vehículos, y entre vehículos y la infraestructura de carreteras. Esta tesis se centra en las VNs, en las cuales la alta velocidad de los nodos y la presencia de obstáculos como edificios producen una topología de red altamente variable, así como frecuentes particiones en la red. Debido a estas características, los protocolos para redes móviles ad-hoc (MANETs) no se adaptan bien a las VANETs. En estas condiciones, las redes tolerantes a retardos (DTNs) se han propuesto como una alternativa capaz de hacer frente a estos problemas. En DTN, cuando un mensaje no puede ser encaminado hacia su destino, no es inmediatamente descartado sino es almacenado hasta que una nueva ruta esta disponible. Cuando las VNs y las DTNs se combinan surgen las redes vehiculares tolerantes a retardos (VDTN). En esta tesis proponemos un nuevo protocolo para VDTNs diseñado para recolectar la información generada por sensores vehiculares. Nuestra propuesta, llamada MSDP, combina la información obtenida del servicio de información geográfica (GIS) con el mapa real de las calles obtenido del sistema de navegación (NS) para definir una nueva métrica de encaminamiento. Resultados analíticos y mediante simulaciones prueban que MSDP mejora el rendimiento de propuestas anteriores. En relación con el despliegue de las VNs y las tecnologías VANET, la tecnología ha dejado atrás las fases de innovación y estandarización, ahora es el momento de alcanzar a los primeros usuarios del mercado. Sin embargo, la mayoría de fabricantes han decidido implementar los dispositivos para VN como unidades de a bordo (OBU), las cuales son caras y difíciles de actualizar. Además, las OBUs son muy dependientes del fabricante original. Todo esto esta retrasando el despliegue de las VNs. Para acelerar la adopción de las VNs, hemos desarrollado la arquitectura GRCBox. La arquitectura GRCBox esta basada en un dispositivo de bajo coste que permite a los usuarios usar comunicaciones V2X (V2V y V2I) mientras utilizan dispositivos de propósito general como teléfonos inteligentes, tabletas o portátiles. Las pruebas incluidas en esta tesis demuestran la viabilidad de la arquitectura GRCBox. Mediante la combinación de nuestra GRCBox y una plataforma de DTN llamada Scampi hemos diseñado y probado un escenario VDTN real. También presentamos como los desarrolladores pueden crear nuevas aplicaciones GRCBox para llevar el potencial de las VN a los dispositivos de usuario.[CA] Els sistemes de transport intel·ligent (ITS) poden crear un transport més segur, més eficient i més sostenible mitjançant l'ús de tecnologies de la informació i les comunicacions aplicades al transport. Una d'aquestes tecnologies són les xarxes vehiculars (VN). Les VN combinen diferents tecnologies de comunicació, com ara les xarxes cel·lulars, les xarxes ad-hoc vehiculars (VANET) o les xarxes 802.11p, per a proporcionar comunicació entre vehicles, i entre vehicles i la infraestructura de carreteres. Aquesta tesi se centra en les VANET, en les quals l'alta velocitat dels nodes i la presència d'obstacles, com els edificis, produeixen una topologia de xarxa altament variable, i també freqüents particions en la xarxa. Per aquest motiu, els protocols per a xarxes mòbils ad-hoc (MANET) no s'adapten bé. En aquestes condicions, les xarxes tolerants a retards (DTN) s'han proposat com una alternativa capaç de fer front a aquests problemes. En DTN, quan un missatge no pot ser encaminat cap a la seua destinació, no és immediatament descartat sinó que és emmagatzemat fins que apareix una ruta nova. Quan les VN i les DTN es combinen sorgeixen les xarxes vehicular tolerants a retards (VDTN). En aquesta tesi proposem un nou protocol per a VDTN dissenyat per a recol·lectar la informació generada per sensors vehiculars. La nostra proposta, anomenada MSDP, combina la informació obtinguda del servei d'informació geogràfica (GIS) amb el mapa real dels carrers obtingut del sistema de navegació (NS) per a definir una nova mètrica d'encaminament. Resultats analítics i mitjançant simulacions proven que MSDP millora el rendiment de propostes prèvies. En relació amb el desplegament de les VN i les tecnologies VANET, la tecnologia ha deixat arrere les fases d'innovació i estandardització, ara és temps d'aconseguir als primers usuaris del mercat. No obstant això, la majoria de fabricants han decidit implementar els dispositius per a VN com a unitats de bord (OBU), les quals són cares i difícils d'actualitzar. A més, les OBU són molt dependents del fabricant original. Tot això està retardant el desplegament de les VN. Per a accelerar l'adopció de les VN, hem desenvolupat l'arquitectura GRCBox. L'arquitectura GRCBox està basada en un dispositiu de baix cost que permet als usuaris usar comunicacions V2V mentre usen dispositius de propòsit general, com ara telèfons intel·ligents, tauletes o portàtils. Les proves incloses en aquesta tesi demostren la viabilitat de l'arquitectura GRCBox. Mitjançant la combinació de la nostra GRCBox i la plataforma de DTN Scampi, hem dissenyat i provat un escenari VDTN pràctic. També presentem com els desenvolupadors poden crear noves aplicacions GRCBox per a portar el potencial de les VN als dispositius d'usuari.Martínez Tornell, S. (2016). Delay Tolerant Networks for Efficient Information Harvesting and Distribution in Intelligent Transportation Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/68486TESI

An Adaptive Broadcasting Strategy for Efficient Dynamic Mapping in Vehicular Networks

In this work, we face the issue of achieving an efficient dynamic mapping in vehicular networking scenarios, i.e., obtaining an accurate estimate of the positions and trajectories of connected vehicles in a certain area. State-of-the-art solutions are based on the periodic broadcasting of the position information of the network nodes, with an inter-transmission period set by a congestion control scheme. However, the movements and maneuvers of vehicles can often be erratic, making transmitted data inaccurate or downright misleading. To address this problem, we propose to adopt a dynamic transmission scheme based on the actual positioning error, sending new data when the estimate overcomes a preset error threshold. Furthermore, the proposed method adapts the error threshold to the operational context according to an innovative congestion control algorithm that limits the collision probability among broadcast packet transmissions. This threshold-based strategy can reduce the network load by avoiding the transmission of redundant messages, and is shown to improve the overall positioning accuracy by more than 20% in realistic urban scenarios