Reconfigurable Video Coding on multicore : an overview of its main objectives

International audienceThe current monolithic and lengthy scheme behind the standardization and the design of new video coding standards is becoming inappropriate to satisfy the dynamism and changing needs of the video coding community. Such scheme and specification formalism does not allow the clear commonalities between the different codecs to be shown, at the level of the specification nor at the level of the implementation. Such a problem is one of the main reasons for the typically long interval elapsing between the time a new idea is validated until it is implemented in consumer products as part of a worldwide standard. The analysis of this problem originated a new standard initiative within the International Organization for Standardization (ISO)/ International Electrotechnical Commission (IEC) Moving Pictures Experts Group (MPEG) committee, namely Reconfigurable Video Coding (RVC). The main idea is to develop a video coding standard that overcomes many shortcomings of the current standardization and specification process by updating and progressively incrementing a modular library of components. As the name implies, flexibility and reconfigurability are new attractive features of the RVC standard. Besides allowing for the definition of new codec algorithms, such features, as well as the dataflow-based specification formalism, open the way to define video coding standards that expressly target implementations on platforms with multiple cores. This article provides an overview of the main objectives of the new RVC standard, with an emphasis on the features that enable efficient implementation on platforms with multiple cores. A brief introduction to the methodologies that efficiently map RVC codec specifications to multicore platforms is accompanied with an example of the possible breakthroughs that are expected to occur in the design and deployment of multimedia services on multicore platforms

Skalabilna implementacija dekodera po normi MPEG korištenjem tokovnog programskog jezika

In this paper, we describe a scalable and portable parallelized implementation of a MPEG decoder using a streaming computation paradigm, tailored to new generations of multi--core systems. A novel, hybrid approach towards parallelization of both new and legacy applications is described, where only data--intensive and performance--critical parts are implemented in the streaming domain. An architecture--independent \u27StreamIt\u27 language is used for design, optimization and implementation of parallelized segments, while the developed \u27StreamGate\u27 interface provides a communication mechanism between the implementation domains. The proposed hybrid approach was employed in re--factoring of a reference MPEG video decoder implementation; identifying the most performance--critical segments and re-implementing them in \u27StreamIt\u27 language, with \u27StreamGate\u27 interface as a communication mechanism between the host and streaming kernel. We evaluated the scalability of the decoder with respect to the number of cores, video frame formats, sizes and decomposition. Decoder performance was examined in the presence of different processor load configurations and with respect to the number of simultaneously processed frames.U ovom radu opisujemo skalabilnu i prenosivu implementaciju dekodera po normi MPEG ostvarenu korištenjem paradigme tokovnog računarstva, prilagođenu novim generacijama višejezgrenih računala. Opisan je novi, hibridni pristup paralelizaciji novih ili postojećih aplikacija, gdje se samo podatkovno intenzivni i računski zahtjevni dijelovi implementiraju u tokovnoj domeni. Arhitekturno neovisni jezik StreamIt koristi se za oblikovanje, optimiranje i izvedbu paraleliziranih segmenata aplikacije, dok razvijeno sučelje \u27StreamGate\u27 omogućava komunikaciju između domena implementacije. Predloženi hibridni pristup razvoju paraleliziranih aplikacija iskorišten je u preoblikovanju referentnog dekodera video zapisa po normi MPEG; identificirani su računski zahtjevni segmenti aplikacije i ponovno implementirani u jeziku StreamIt, sa sučeljem \u27StreamGate\u27 kao poveznicom između slijedne i tokovne domene. Ispitivana su svojstva skalabilnosti s obzirom na ciljani broj jezgri, format video zapisa i veličinu okvira te dekompoziciju ulaznih podataka. Svojstva dekodera  su praćena u prisustvu različitih opterećenja ispitnog računala, i s obzirom na broj istovremeno obrađivanih okvira

A highly scalable parallel implementation of H.264

Developing parallel applications that can harness and efficiently use future many-core architectures is the key challenge for scalable computing systems. We contribute to this challenge by presenting a parallel implementation of H.264 that scales to a large number of cores. The algorithm exploits the fact that independent macroblocks (MBs) can be processed in parallel, but whereas a previous approach exploits only intra-frame MB-level parallelism, our algorithm exploits intra-frame as well as inter-frame MB-level parallelism. It is based on the observation that inter-frame dependencies have a limited spatial range. The algorithm has been implemented on a many-core architecture consisting of NXP TriMedia TM3270 embedded processors. This required to develop a subscription mechanism, where MBs are subscribed to the kick-off lists associated with the reference MBs. Extensive simulation results show that the implementation scales very well, achieving a speedup of more than 54 on a 64-core processor, in which case the previous approach achieves a speedup of only 23. Potential drawbacks of the 3D-Wave strategy are that the memory requirements increase since there can be many frames in flight, and that the frame latency might increase. Scheduling policies to address these drawbacks are also presented. The results show that these policies combat memory and latency issues with a negligible effect on the performance scalability. Results analyzing the impact of the memory latency, L1 cache size, and the synchronization and thread management overhead are also presented. Finally, we present performance requirements for entropy (CABAC) decoding. This work was performed while the fourth author was with NXP Semiconductors.Peer ReviewedPostprint (author's final draft

Evaluation of parallel H.264 decoding strategies for the Cell Broadband Engine

How to develop efficient and scalable parallel applications is the key challenge for emerging many-core architectures. We investigate this question by implementing and comparing two parallel H.264 decoders on the Cell architecture. It is expected that future many-cores will use a Cell-like local store memory hierarchy, rather than a non-scalable shared memory. The two implemented parallel algorithms, the Task Pool (TP) and the novel Ring-Line (RL) approach, both exploit macroblock-level parallelism. The TP implementation follows the master-slave paradigm and is very dynamic so that in theory perfect load balancing can be achieved. The RL approach is distributed and more predictable in the sense that the mapping of macroblocks to processing elements is fixed. This allows to better exploit data locality, to overlap communication with computation, and to reduce communication and synchronization overhead. While TP is more scalable in theory, the actual scalability favors RL. Using 16 SPEs, RL obtains a scalability of 12x, while TP achieves only 10.3x. More importantly, the absolute performance of RL is much higher. Using 16 SPEs, RL achieves a throughput of 139.6 frames per second (fps) while TP achieves only 76.6 fps. A large part of the additional performance advantage is due to hiding the memory latency. From the results we conclude that in order to fully leverage the performance of future many-cores, a centralized master should be avoided and the mapping of tasks to cores should be predictable in order to be able to hide the memory latency

High-Efficient Parallel CAVLC Encoders on Heterogeneous Multicore Architectures

This article presents two high-efficient parallel realizations of the context-based adaptive variable length coding (CAVLC) based on heterogeneous multicore processors. By optimizing the architecture of the CAVLC encoder, three kinds of dependences are eliminated or weaken, including the context-based data dependence, the memory accessing dependence and the control dependence. The CAVLC pipeline is divided into three stages: two scans, coding, and lag packing, and be implemented on two typical heterogeneous multicore architectures. One is a block-based SIMD parallel CAVLC encoder on multicore stream processor STORM. The other is a component-oriented SIMT parallel encoder on massively parallel architecture GPU. Both of them exploited rich data-level parallelism. Experiments results show that compared with the CPU version, more than 70 times of speedup can be obtained for STORM and over 50 times for GPU. The implementation of encoder on STORM can make a real-time processing for 1080p @30fps and GPU-based version can satisfy the requirements for 720p real-time encoding. The throughput of the presented CAVLC encoders is more than 10 times higher than that of published software encoders on DSP and multicore platforms

Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding

Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 × 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip