TOWARD INTELLIGENT WELDING BY BUILDING ITS DIGITAL TWIN

To meet the increasing requirements for production on individualization, efficiency and quality, traditional manufacturing processes are evolving to smart manufacturing with the support from the information technology advancements including cyber-physical systems (CPS), Internet of Things (IoT), big industrial data, and artificial intelligence (AI). The pre-requirement for integrating with these advanced information technologies is to digitalize manufacturing processes such that they can be analyzed, controlled, and interacted with other digitalized components. Digital twin is developed as a general framework to do that by building the digital replicas for the physical entities. This work takes welding manufacturing as the case study to accelerate its transition to intelligent welding by building its digital twin and contributes to digital twin in the following two aspects (1) increasing the information analysis and reasoning ability by integrating deep learning; (2) enhancing the human user operative ability to physical welding manufacturing via digital twins by integrating human-robot interaction (HRI). Firstly, a digital twin of pulsed gas tungsten arc welding (GTAW-P) is developed by integrating deep learning to offer the strong feature extraction and analysis ability. In such a system, the direct information including weld pool images, arc images, welding current and arc voltage is collected by cameras and arc sensors. The undirect information determining the welding quality, i.e., weld joint top-side bead width (TSBW) and back-side bead width (BSBW), is computed by a traditional image processing method and a deep convolutional neural network (CNN) respectively. Based on that, the weld joint geometrical size is controlled to meet the quality requirement in various welding conditions. In the meantime, this developed digital twin is visualized to offer a graphical user interface (GUI) to human users for their effective and intuitive perception to physical welding processes. Secondly, in order to enhance the human operative ability to the physical welding processes via digital twins, HRI is integrated taking virtual reality (VR) as the interface which could transmit the information bidirectionally i.e., transmitting the human commends to welding robots and visualizing the digital twin to human users. Six welders, skilled and unskilled, tested this system by completing the same welding job but demonstrate different patterns and resulted welding qualities. To differentiate their skill levels (skilled or unskilled) from their demonstrated operations, a data-driven approach, FFT-PCA-SVM as a combination of fast Fourier transform (FFT), principal component analysis (PCA), and support vector machine (SVM) is developed and demonstrates the 94.44% classification accuracy. The robots can also work as an assistant to help the human welders to complete the welding tasks by recognizing and executing the intended welding operations. This is done by a developed human intention recognition algorithm based on hidden Markov model (HMM) and the welding experiments show that developed robot-assisted welding can help to improve welding quality. To further take the advantages of the robots i.e., movement accuracy and stability, the role of the robot upgrades to be a collaborator from an assistant to complete a subtask independently i.e., torch weaving and automatic seam tracking in weaving GTAW. The other subtask i.e., welding torch moving along the weld seam is completed by the human users who can adjust the travel speed to control the heat input and ensure the good welding quality. By doing that, the advantages of humans (intelligence) and robots (accuracy and stability) are combined together under this human-robot collaboration framework. The developed digital twin for welding manufacturing helps to promote the next-generation intelligent welding and can be applied in other similar manufacturing processes easily after small modifications including painting, spraying and additive manufacturing

Tungsten Inert Gas (TIG) Assisted TiC-NiCoating on AISI 304 Stainless Steel

Metal components very often lose their functionality through wear by various modes such as abrasion, impact or corrosion. To counteract such problems, and there by to extend the service life, modification of surfaces are frequently done. This surface engineering approach finds application across many sectors namely defense, mining, steel, power, cement, petrochemical sugarcane and food. Generally the base material of the component is selected on the ground of strength and cost involved, while the details of the surface properties are adopted for local tribological conditions to which the vulnerable section will be subjected during its service period. There have been wide range advancement in surface engineering technology to square up surface failure in steels. But each technology that evolved has its own limitations. Deposition of thin hard coatings of 0.5 mm can improve tribological properties in terms of low friction and wear resistance. But in case of light metal alloys, when the load is high, the coating may fail by deformation. In such cases reinforcement of metals with ceramics can increase the physical and surface properties like strength, stiffness, wear resistance, high temperature strength and a reduction in weight. Over the years, modification of the matrix close to the surface, as well as reinforcement, has been introduced. The addition of ceramic particles into the molten metal surfaces to form a metal matrix composite (MMC) is a very popular one and is widely used worldwide. The formation of MMC meets the specifications required for specific applications. Tungsten Inert Gas (TIG) welding method produces a small modified hemispherical surface which has a width of few millimeters. It also incorporates less cost compared to laser treatment, so widely in practice. TiC is used as a reinforcement material as it has received some attention being a wear resistance substrate. Ni is used as it is a very good binder that produces a well-mixed Tic-Ni mixture. TIG process was used to melt the TiCNi MMC on an AISI 304 stainless steel. This achieved an approximate micro hardness value of 800HV

ESTABLISHING THE FOUNDATION TO ROBOTIZE COMPLEX WELDING PROCESSES THROUGH LEARNING FROM HUMAN WELDERS BASED ON DEEP LEARNING TECHNIQUES

As the demand for customized, efficient, and high-quality production increases, traditional manufacturing processes are transforming into smart manufacturing with the aid of advancements in information technology, such as cyber-physical systems (CPS), the Internet of Things (IoT), big data, and artificial intelligence (AI). The key requirement for integration with these advanced information technologies is to digitize manufacturing processes to enable analysis, control, and interaction with other digitized components. The integration of deep learning algorithm and massive industrial data will be critical components in realizing this process, leading to enhanced manufacturing in the Future of Work at the Human-Technology Frontier (FW-HTF). This work takes welding manufacturing as the case study to accelerate its transition to intelligent welding by robotize a complex welding process. By integrate process sensing, data visualization, deep learning-based modeling and optimization, a complex welding system is established, with the systematic solution to generalize domain-specific knowledge from experienced human welder. Such system can automatically perform complex welding processes that can only be handled by human in the past. To enhance the system\u27s tracking capabilities, we trained an image segmentation network to offer precise position information. We incorporated a recurrent neural network structure to analyze dynamic variations during welding. Addressing the challenge of human heterogeneity in data collection, we conducted experiments illustrating that even inaccurate datasets can effectively train deep learning models with zero mean error. Fine-tuning the model with a small portion of accurate data further elevates its performance

A comparison of the physics of Gas Tungsten Arc Welding (GTAW), Electron Beam Welding (EBW), and Laser Beam Welding (LBW)

The physics governing the applicability and limitations of gas tungsten arc (GTA), electron beam (EB), and laser beam (LB) welding are compared. An appendix on the selection of laser welding systems is included

Feasibility of remotely manipulated welding in space. A step in the development of novel joining technologies

In order to establish permanent human presence in space technologies of constructing and repairing space stations and other space structures must be developed. Most construction jobs are performed on earth and the fabricated modules will then be delivered to space by the Space Shuttle. Only limited final assembly jobs, which are primarily mechanical fastening, will be performed on site in space. Such fabrication plans, however, limit the designs of these structures, because each module must fit inside the transport vehicle and must withstand launching stresses which are considerably high. Large-scale utilization of space necessitates more extensive construction work on site. Furthermore, continuous operations of space stations and other structures require maintenance and repairs of structural components as well as of tools and equipment on these space structures. Metal joining technologies, and especially high-quality welding, in space need developing

Experimental Investigation on Autogenous Tungsten Inert Gas (TIG) Welding of AISI 1020 Mild Steel

Tungsten Inert Gas welding is also known as Gas Tungsten Arc Welding (GTAW), is an advance arc welding process become a popular choice when a high level of weld quality or considerable precision welding is required. However, the major problems of TIG welding process are its slow welding speed and limited to lower thickness material in single pass. In this work, autogenous TIG welding has been performed on 5 mm thick AISI 1020 mild steel plate without using any filler material. Wide range of welding current and scan speed has been tested for obtaining a full penetration welding. Activated flux has also been used to improve the weld depth. After performing welding by maintaining different gap between the plates to be welded, weld bead geometry and tensile strength of the weld has been investigated. It is observed that, by maintaining an appropriate gap full penetration welding of plate is possible which gives strength almost similar to base materia

Role of Industrial Robotic Automation Systems

This project focuses on the role of robots in increasing safety, productivity and profit for four specific industries: manufacturing, medical, construction and food packaging. A cost analysis of industry robot integration is provided supporting a positive increase in tasks performance and reduction of operational costs. A Tungsten Inert Gas welding assistive robot prototype was designed based on the knowledge acquired through welding training sessions at WPI\u27s Washburn Shops. A prototype was built using Arduino hardware and software for controls

Virtual Reality Applied to Welder Training

Welding is a challenging, risky, and time-consuming profession. Recently, there has been a documented shortage of trained welders, and as a result, the market is pushing for an increase in the rate at which new professionals are trained. To address this growing demand, training institutions are exploring alternative methods to train future professionals with the goals of improving learner retention of information, shortening training periods, and lowering associated expenses. The emergence of virtual reality technologies has led to initiatives to explore their potential for welding training. Multiple studies have suggested that virtual reality training delivers comparable, or even superior, results when compared to more conventional approaches, with shorter training times and reduced costs in consumables. Additionally, virtual reality allows trainees to try out different approaches to their work. The primary goal of this dissertation is to develop a virtual reality welding simulator. To achieve this objective effectively, the creation of a classification system capable of identifying the simulator’s key characteristics becomes imperative. Therefore, the secondary objective of this thesis is to develop a classification system for the accurate evaluation and comparison of virtual reality welding simulators. Regarding the virtual reality welding simulation, the HTC VIVE Pro 2 virtual reality equipment was employed, to transfer the user’s action from the physical to the virtual world. Within this virtual environment, it was introduced a suite of welding tools and integrated a Smoothed Particle Hydrodynamics simulator to mimic the weld creation. After conducting comprehensive testing that revealed certain limitations in welding quality and in the simulator performance, the project opted to incorporate a Computational Fluid Dynamics (CFD) simulator. The development of the CFD simulator proved to be a formidable challenge, and regrettably, its complete implementation was unattainable. Nevertheless, the project delved into three distinct grid architectures, from these, the dynamic grid was ultimately implemented. It also proficiently integrated two crucial solvers for the Navier-Stokes equations. These functions were implemented in the Graphics Processing Unit (GPU), to improve their efficiency. Upon comparing GPU and Central Processing Unit (CPU) performance, the project highlighted the substantial computational advantages of GPUs and the advantages it brings to fluid simulations.A soldadura é uma profissão exigente, perigosa e que requer um grande investimento de tempo para alcançar resultados satisfatórios. Recentemente, tem sido registada uma falta de profissionais qualificados na área da soldadura. Como resultado, o mer cado está a pressionar para um aumento do ritmo a que os novos trabalhadores são formados. Para responder a esta crescente procura, as instituições de formação estão a explorar métodos alternativos para formar futuros profissionais, com o objetivo de melhorar a retenção de informação, encurtar os períodos de treino e reduzir as despe sas associadas. Com o desenvolvimento de tecnologias nas áreas de realidade virtual e realidade aumentada, têm surgido iniciativas para explorar o potencial destas na formação de soldadura. Vários estudos sugeriram que a formação em realidade virtual proporciona resultados comparáveis, ou mesmo superiores, aos de abordagens mais convencionais, com tempos de formação mais curtos e reduções nos custos de consumíveis. Além disso, a realidade virtual permite aos formandos experimentar diferentes abordagens ao seu trabalho. O objetivo principal desta dissertação é o desenvolvimento de um simulador de soldadura em realidade virtual. Para atingir este objetivo de forma eficaz, torna-se imperativa a criação de um sistema de classificação capaz de identificar as características chave do simulador. Assim, o objetivo secundário desta dissertação é desenvolver um sistema de classificação para a avaliação e comparação precisas de simuladores de soldadura em realidade virtual. Relativamente ao simulador de soldadura em realidade virtual, foi utilizado o kit de realidade virtual HTC VIVE Pro 2, para transferir as ações do utilizador no mundo físico para o mundo virtual. No ambiente virtual, foi introduzido um con junto de ferramentas de soldadura e integrado um simulador de Hidrodinâmica de Partículas Suavizadas para simular a criação da solda. Após a realização de testes exaustivos que revelaram algumas limitações na qualidade da solda e no desempenho do simulador, o projeto optou por incorporar um simulador de Dinâmica de Fluidos Computacional (CFD). O desenvolvimento do simulador CFD revelou-se um desa fio formidável e, infelizmente, não foi possível completar a sua implementação. No entanto, o projeto aprofundou três arquiteturas de grelha distintas, das quais foi implementada a grelha dinâmica. O projeto também implementou duas funções cru ciais para resolver as equações de Navier-Stokes. As funções relativas ao simulador de fluidos foram implementadas na Unidade de Processamento Gráfico (GPU), a fim de melhorar a sua eficiência. Ao comparar o desempenho da GPU com o da Unidade Central de Processamento (CPU), o projeto evidenciou os beneficios computacionais das GPUs e as vantagens que trazem para as simulações de fluidos

Design and Fabrication of Automatic Welding Manipulator for Oil and Gas Pipeline Welding

Welding is a familiar process in oil and gas industry however, the shortage of man power with the expertise is decreasing. In order to prevent loss due to poor quality of weldment, manipulators has been implemented most of the oil and gas company. Still, there were none manipulators that have been established as for the purpose of oil and gas pipeline welding. This project present a welding manipulator that is designed especially for the purposed of oil and gas pipeline welding, included in this report also the mechanical structure design and the mechanism of the manipulators. The drawing and the design will be performed by using SOLIDWORK 2015 where proper geometric relation such as the material specification and dimension