A dual approach for positive T–S fuzzy controller design and its application to cancer treatment under immunotherapy and chemotherapy

This study proposes an effective positive control design strategy for cancer treatment by resorting to the combination of immunotherapy and chemotherapy. The treatment objective is to transfer the initial number of tumor cells and immune–competent cells from the malignant region into the region of benign growth where the immune system can inhibit tumor growth. In order to achieve this goal, a new modeling strategy is used that is based on Takagi–Sugeno. A Takagi-Sugeno fuzzy model is derived based on the Stepanova nonlinear model that enables a systematic design of the controller. Then, a positive Parallel Distributed Compensation controller is proposed based on a linear co-positive Lyapunov Function so that the tumor volume and administration of the chemotherapeutic and immunotherapeutic drugs is reduced, while the density of the immune-competent cells is reached to an acceptable level. Thanks to the proposed strategy, the entire control design is formulated as a Linear Programming problem. Finally, the simulation results show the effectiveness of the proposed control approach for the cancer treatment

Mathematical Modeling of Biological Systems

Mathematical modeling is a powerful approach supporting the investigation of open problems in natural sciences, in particular physics, biology and medicine. Applied mathematics allows to translate the available information about real-world phenomena into mathematical objects and concepts. Mathematical models are useful descriptive tools that allow to gather the salient aspects of complex biological systems along with their fundamental governing laws, by elucidating the system behavior in time and space, also evidencing symmetry, or symmetry breaking, in geometry and morphology. Additionally, mathematical models are useful predictive tools able to reliably forecast the future system evolution or its response to specific inputs. More importantly, concerning biomedical systems, such models can even become prescriptive tools, allowing effective, sometimes optimal, intervention strategies for the treatment and control of pathological states to be planned. The application of mathematical physics, nonlinear analysis, systems and control theory to the study of biological and medical systems results in the formulation of new challenging problems for the scientific community. This Special Issue includes innovative contributions of experienced researchers in the field of mathematical modelling applied to biology and medicine

Simulations in statistical physics and biology: some applications

One of the most active areas of physics in the last decades has been that of critical phenomena, and Monte Carlo simulations have played an important role as a guide for the validation and prediction of system properties close to the critical points. The kind of phase transitions occurring for the Betts lattice (lattice constructed removing 1/7 of the sites from the triangular lattice) have been studied before with the Potts model for the values q=3, ferromagnetic and antiferromagnetic regime. Here, we add up to this research line the ferromagnetic case for q=4 and 5. In the first case, the critical exponents are estimated for the second order transition, whereas for the latter case the histogram method is applied for the occurring first order transition. Additionally, Domany's Monte Carlo based clustering technique mainly used to group genes similar in their expression levels is reviewed. Finally, a control theory tool --an adaptive observer-- is applied to estimate the exponent parameter involved in the well-known Gompertz curve. By treating all these subjects our aim is to stress the importance of cooperation between distinct disciplines in addressing the complex problems arising in biology. Contents: Chapter 1 - Monte Carlo simulations in stat. physics; Chapter 2: MC simulations in biology; Chapter 3: Gompertz equationComment: 82 pages, 33 figures, 4 tables, somewhat reduced version of the M.Sc. thesis defended in Jan. 2006 at IPICyT, San Luis Potosi, Mx. (Supervisers: Drs. R. Lopez-Sandoval and H.C. Rosu). Last sections 3.3 and 3.4 can be found at http://lanl.arxiv.org/abs/physics/041108

Dynamical Models of Biology and Medicine

Mathematical and computational modeling approaches in biological and medical research are experiencing rapid growth globally. This Special Issue Book intends to scratch the surface of this exciting phenomenon. The subject areas covered involve general mathematical methods and their applications in biology and medicine, with an emphasis on work related to mathematical and computational modeling of the complex dynamics observed in biological and medical research. Fourteen rigorously reviewed papers were included in this Special Issue. These papers cover several timely topics relating to classical population biology, fundamental biology, and modern medicine. While the authors of these papers dealt with very different modeling questions, they were all motivated by specific applications in biology and medicine and employed innovative mathematical and computational methods to study the complex dynamics of their models. We hope that these papers detail case studies that will inspire many additional mathematical modeling efforts in biology and medicin

Fractional model of cancer immunotherapy and its optimal control

Cancer is one of the most serious illnesses in all of the world. Although most of the cancer patients are treated with chemotherapy, radiotherapy and surgery, wide research is conducted related to experimental and theoretical immunology. In recent years, the research on cancer immunotherapy has led to major medical advances. Cancer immunotherapy refers to the stimulation of immune system to deal with cancer cells. In medical practice, it is mainly achieved by using effector cells such as activated T-cells and Interleukin-2 (IL-2), which is the main cytokine responsible for lymphocyte activation, growth and differentiation. A well-known mathematical model, named as Kirschner-Panetta (KP) model, represents richly the dynamics of the interaction between cancer cells, IL-2 and the effector cells. The dynamics of the KP model is described and the solution to which is approximated by using polynomial approximation based methods such as Adomian decomposition method and differential transform method. The rich nonlinearity of the KP model causes these approaches to become so complicated in order to deal with the representation of polynomial approximations. It is illustrated that the approximated polynomials are in good agreement with the solution obtained by common numerical approaches. In the KP model, the growth of the tumour cells can be expressed by a linear function or any limited-growth function such as logistic equation, in which the cancer population possesses an upper bound mentioned as carrying capacity. Effector cells and IL-2 construct two external sources of medical treatment to stimulate immune system to eradicate cancer cells. Since the main goal in immunotherapy is to remove the tumour cells with the least probable medication side effects, an advanced version of the model may include a time dependent external sources of medical treatment, meaning that the external sources of medical treatment could be considered as control functions of time and therefore the optimum use of medical sources can be evaluated in order to achieve the optimal measure of an objective function. With this sense of direction, two distinct strategies are explored. The first one is to only consider the external source of effector cells as the control function to formulate an optimal control problem. It is shown under which circumstances, the tumour is eliminated. The approach in the formulation of the optimal control is the Pontryagin maximum principal. Furthermore the optimal control problem will be dealt with using particle swarm optimization (PSO). It is shown that the obtained results are significantly better than those obtained by previous researchers. The second strategy is to formulate an optimal control problem by considering both the two external sources as the controls. To our knowledge, it is the first time to present a multiple therapeutic protocol for the KP model. Some MATLAB routines are develop to solve the optimal control problems based on Pontryagin maximum principal and also the PSO. As known, fractional differential equations are more appropriate to describe the persistent memory of physical phenomena. Thus, the fractional KP model is defined in the sense of Caputo differentiation operator. An effective method for numerical treatment of the model is described, namely Predictor-Corrector method of Adams-Bashforth-Moulton type. A robust MATLAB routine is coded based on the mentioned approach and the solution obtained will be compared with those of the classical KP model. The code is prepared in such a way to be able to deal with systems of fractional differential equations, in which each equation has its own fractional order (i.e. multi-order systems of fractional differential equations). The theorems for existence of solutions and the stability analysis of the fractional KP model are represented. In this regard, a frequently used method of solving fractional differential equations (FDEs) is described in details, namely multi-step generalized differential transform method (MSGDTM), then it is illustrated that the method neglects the persistent memory property and takes the incorrect approach in dealing with numerical solutions of FDEs and therefore it is unfit to be used in differential equations governed by fractional differentiation operators. The sigmoidal behavior of the solution to the logistic equation caused it to be one of the most versatile models in natural sciences and therefore the fractional logistic equation would be a relevant problem to be dealt with. Thus, a power series of Mittag-Leffer functions is introduced, the behaviour of which is in good agreement with the solution to fractional logistic equation (FLE), and then a fractional integro-differential equation is represented and proved to be satisfied with the power series of Mittag-Leffler function. The obtained fractional integro-differential equation is named as modified fractional differential equation (MFDL) and possesses a nonlinear additive term related to the solution of the logistic equation (LE). The method utilized in the thesis, may be appropriately applied to the analysis of solutions to nonlinear fractional differential equations of mathematical physics. Inverse problems to FDEs occur in many branches of science. Such problems have been investigated, for instance, in fractional diffusion equation and inverse boundary value problem for semi- linear fractional telegraph equation. The determination of the order of fractional differential equations is an issue, which has been analyzed and discussed in, for instance, fractional diffusion equations. Thus, fractional order estimation has been conducted for some classes of linear fractional differential equations, by introducing the relationship between the fractional order and the asymptotic behaviour of the solutions to linear fractional differential equations. Fractional optimal control problems, in which the system and (or) the objective function are described based on fractional derivatives, are much more complicated to be solved by using a robust and reliable numerical approach. Thus, a MATLAB routine is provided to solve the optimal control for fractional KP model and the obtained solutions are compared with those of classical KP model. It is shown that the results for fractional optimal control problems are better than classical optimal control problem in the sense of the amount of drug administration

International Conference on Mathematical Analysis and Applications in Science and Engineering – Book of Extended Abstracts

The present volume on Mathematical Analysis and Applications in Science and Engineering - Book of Extended Abstracts of the ICMASC’2022 collects the extended abstracts of the talks presented at the International Conference on Mathematical Analysis and Applications in Science and Engineering – ICMA2SC'22 that took place at the beautiful city of Porto, Portugal, in June 27th-June 29th 2022 (3 days). Its aim was to bring together researchers in every discipline of applied mathematics, science, engineering, industry, and technology, to discuss the development of new mathematical models, theories, and applications that contribute to the advancement of scientific knowledge and practice. Authors proposed research in topics including partial and ordinary differential equations, integer and fractional order equations, linear algebra, numerical analysis, operations research, discrete mathematics, optimization, control, probability, computational mathematics, amongst others. The conference was designed to maximize the involvement of all participants and will present the state-of- the-art research and the latest achievements.info:eu-repo/semantics/publishedVersio