Design and Implementation of Novel High Performance Domino Logic

This dissertation presents design and implementation of novel high performance domino logic techniques with increased noise robustness and reduced leakages. The speed and overhead area became the primary parameters of choice for fabrication industry that led to invention of clocked logic styles named as Dynamic logic and Domino logic families. Most importantly, power consumption, noise immunity, speed of operation, area and cost are the predominant parameters for designing any kind of digital logic circuit technique with effective trade-off amongst these parameters depending on the situation and application of design. Because of its high speed and low overhead area domino logic became process of choice for designing of high speed application circuits. The concerning issues are large power consumption and high sensitivity towards noise. Hence, there is a need for designing new domino methodology to meet the requirements by overcoming above mentioned drawbacks which led to ample opportunities for diversified research in this field. Therefore, the outcome of research must be able to handle the primary design parameters efficiently. Besides this, the designed circuit must exhibit high degree of robustness towards noise.In this thesis, few domino logic circuit techniques are proposed to deal with noise and sub-threshold leakages. Effect of signal integrity issues on domino logic techniques is studied. Furthermore, having been subjected to process corner analysis and noise analysis, the overall performance of proposed domino techniques is found to be enhanced despite a few limitations that are mentioned in this work. Besides this, lector based domino and dynamic node stabilized techniques are also proposed and are investigated thoroughly. Simulations show that proposed circuits are showing superior performance. In addition to this, domino based Schmitt triggers with various hysteresis phenomena are designed and simulated. Pre-layout and post-layout simulation results are compared for proposed Schmitt trigger. Simulations reveal that proposed Schmitt trigger techniques are more noise tolerant than CMOS counterparts. Moreover, a test chip for domino based Schmitt trigger is done in UMC 180 nm technology for fabrication

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

Design and Analysis of Improved Domino Logic with Noise Tolerance and High Performance

The demands of upcoming computing, as well as the challenges of nanometer-era of VLSI design necessitate new digital logic techniques and styles that are at the same time high performance, energy efficient and robust to noise and variation. Dynamic CMOS logic gates are broadly used to design high performance circuits due to their high speed. Conversely, the vital demerit of dynamic logic style is its high noise sensitivity. The main reason for this is the sub-threshold leakage current flowing through the pull down network. With continuous technology scaling, this problem is getting more and more severe. In this thesis, a new noise tolerant dynamic CMOS circuit technique is proposed. In the proposed work, we have enhanced the behavior of the domino CMOS logic. This technique also gets benefit in terms of delay and power. This thesis describes the new low power, noise tolerant and high speed domino logic technique and presents a comparison result of this logic with previously reported schemes. Simulation results prove that, in 180 nm CMOS technology when we used this logic style to realize wide fan-in logic gates, it could achieve maximum level of noise robustness as compared to its basic counterpart. In addition, the logic also works efficiently with sequential circuits. The feasibility of this new technique is demonstrated by means of a real hardware, we have built a custom test-chip in the UMC 180 nm process technology with an ALU core, using the proposed domino logic style for each design block. In this thesis, we have also described the design and implementation of this chip. In addition to this, we have also presented initial power and delay performance comparisons between the circuit level simulated ALU and test-chip implemented in the proposed domino logic style. Finally we conclude that, the thesis contributes a very efficient logic style for wide fan-in gates, which is not only noise robust but also energy efficient and high speed

Subthreshold circuits: Design, implementation and application

Digital circuits operating in the subthreshold region of the transistor are being used as an ideal option for ultra low power complementary metal-oxide-semiconductor (CMOS) design. The use of subthreshold circuit design in cryptographic systems is gaining importance as a counter measure to power analysis attacks. A power analysis attack is a non-invasive side channel attack in which the power consumption of the cryptographic system can be analyzed to retrieve the encrypted data. A number of techniques to increase the resistance to power attacks have been proposed at algorithmic and hardware levels, but these techniques suffer from large area and power overheads. The main aim of this research is to understand the viability of implementing subthreshold systems for cryptographic applications. Standard cell libraries in subthreshold are designed and a methodology to identify the minimum energy point, aspect ratio, frequency range and operating voltage for CMOS standard cells is defined. As scalar multiplication is the fundamental operation in elliptic curve cryptographic systems, a digit-level gaussian normal basis (GNB) multiplier is implemented using the aforementioned standard cells. A similar standard-cell library is designed for the multiplier to operate in the superthreshold regime. The subthreshold and superthreshold multipliers are then subjected to a differential power analysis attack. Power performance and signal-to-noise ratio (SNR) of both these systems are compared to evaluate the usefulness of the subthreshold design. The power consumption of the subthreshold multiplier is 4.554 uW, the speed of the multiplier is 65.1 KHz and the SNR is 40 dB. The superthreshold multiplier has a power consumption of 4.005 mW, the speed of the multiplier is 330 MHz and the SNR is 200 dB. Reduced power consumption, hence reduced SNR, increases the resistance of the subthreshold multiplier against power analysis attacks. (Refer to PDF for exact formulas)

Improved Techniques for High Performance Noise-Tolerant Domino CMOS Logic Circuits

Domino CMOS logic circuit family finds a wide variety of applications in microprocessors, digital signal processors, and dynamic memory due to their high speed and low device count. However, there are inevitable problems that degrade the noise immunity of this family; they are the inevitable leakage current and the charge sharing. Added to the drawbacks is the relatively large power consumption, especially if compared to the static complementary CMOS logic family. To make the matter worse, these drawbacks are more tactile with the scaling of CMOS technology. In my thesis, An introduction to domino logic, The impact of CMOS technology scaling on the performance of domino CMOS logic, Three Phase Domino Logic Circuit, High-performance noise-tolerant circuit techniques for CMOS dynamic logic and other Domino logic techniques are studied and corresponding Domino logic techniques have been designed and simulated. Specifically, the need to decrease the dynamic power consumption forces the designer to use a lower power-supply voltage. This in turn necessitates the reduction of threshold voltage to maintain the performance with the associated increase in sub threshold leakage current. So, a properly sized PMOS keeper must be used to compensate for this leakage. It will be found that the speed, which is the major advantage of domino logic compared to other logic styles, will degrade with CMOS technology scaling due to the contention current of the keeper. To assure high performance in noise tolerant techniques, the inevitable effects like leakage currents and charge distribution have to be minimized. In this thesis few modifications have also been made to already existing domino techniques and different Domino logic circuits are simulated in both Cadence virtuoso (implemented using GPDK090- library of 90nm technology) and Mentor graphics (implemented at different technologies like Tsmc 035.mod, Tsmc 025.mod, Tsmc 018.mod) environments. The performance parameters are also compared with other standard architectures of Domino logic

High-Performance, Energy-Efficient CMOS Arithmetic Circuits

In a modern microprocessor, datapath/arithmetic circuits have always been an important building block in delivering high-performance, energy-efficient computing, because arithmetic operations such as addition and binary number comparison are two of the most commonly used computing instructions. Besides the manufacturing CMOS process, the two most critical design considerations for arithmetic circuits are the logic style and micro-architecture. In this thesis, a constant-delay (CD) logic style is proposed targeting full-custom high-speed applications. The constant delay characteristic of this logic style (regardless of the logic type) makes it suitable for implementing complicated logic expressions such as addition. CD logic exhibits a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. This feature enables a performance advantage over static and dynamic domino logic styles in a single cycle, multi-stage circuit block. Several design considerations including timing window width adjustment and clock distribution are discussed. Using a 65-nm general-purpose CMOS technology, the proposed logic style demonstrates an average speedup of 94% and 56% over static and dynamic domino logic, respectively, in five different logic gates. Simulation results of 8-bit ripple carry adders conclude that CD logic is 39% and 23% faster than the static and dynamic-based adders, respectively. CD logic also demonstrates 39% speedup and 64% (22%) energy-delay product reduction from static logic at 100% (10%) data activity in 32-bit carry lookahead adders. To confirm CD logic's potential, a 148 ps, single-cycle 64-bit adder with CD logic implemented in the critical path is fabricated in a 65-nm, 1-V CMOS process. A new 64-bit Ling adder micro-architecture, which utilizes both inversion and absorption properties to minimize the number of CD logic and the number of logic stage in the critical path, is also proposed. At 1-V supply, this adder's measured worst-case power and leakage power are 135 mW and 0.22 mW, respectively. A single-cycle 64-bit binary comparator utilizing a radix-2 tree structure is also proposed. This comparator architecture is specifically designed for static logic to achieve both low-power and high-performance operation, especially in low input data activity environments. At 65-nm technology with 25% (10%) data activity, the proposed design demonstrates 2.3x (3.5x) and 3.7x (5.8x) power and energy-delay product efficiency, respectively. This comparator is also 2.7x faster at iso-energy (80 fJ) or 3.3x more energy-efficient at iso-delay (200 ps) than existing designs. An improved comparator, where CD logic is utilized in the critical path to achieve high performance without sacrificing the overall energy efficiency, is also realized in a 65-nm 1-V CMOS process. At 1-V supply, the proposed comparator's measured delay is 167 ps, and has an average power and a leakage power of 2.34 mW and 0.06 mW, respectively. At 0.3-pJ iso-energy or 250-ps iso-delay budget, the proposed comparator with CD logic is 20% faster or 17% more energy-efficient compared to a comparator implemented with just the static logic

Low power predictable memory and processing architectures

Great demand in power optimized devices shows promising economic potential and draws lots of attention in industry and research area. Due to the continuously shrinking CMOS process, not only dynamic power but also static power has emerged as a big concern in power reduction. Other than power optimization, average-case power estimation is quite significant for power budget allocation but also challenging in terms of time and effort. In this thesis, we will introduce a methodology to support modular quantitative analysis in order to estimate average power of circuits, on the basis of two concepts named Random Bag Preserving and Linear Compositionality. It can shorten simulation time and sustain high accuracy, resulting in increasing the feasibility of power estimation of big systems. For power saving, firstly, we take advantages of the low power characteristic of adiabatic logic and asynchronous logic to achieve ultra-low dynamic and static power. We will propose two memory cells, which could run in adiabatic and non-adiabatic mode. About 90% dynamic power can be saved in adiabatic mode when compared to other up-to-date designs. About 90% leakage power is saved. Secondly, a novel logic, named Asynchronous Charge Sharing Logic (ACSL), will be introduced. The realization of completion detection is simplified considerably. Not just the power reduction improvement, ACSL brings another promising feature in average power estimation called data-independency where this characteristic would make power estimation effortless and be meaningful for modular quantitative average case analysis. Finally, a new asynchronous Arithmetic Logic Unit (ALU) with a ripple carry adder implemented using the logically reversible/bidirectional characteristic exhibiting ultra-low power dissipation with sub-threshold region operating point will be presented. The proposed adder is able to operate multi-functionally

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era

High-performance subthreshold standard cell design and cell placement optimization

Please see PDF for exact formulas

Managing Variability in VLSI Circuits.

Over the last two decades, Design for Manufacturing (DFM) has emerged as an essential field within the semiconductor industry. The main objective of DFM is to reduce and, if possible, eliminate variability in integrated circuits (ICs). Numerous techniques for managing variation have emerged throughout IC design: manufacturers design instruments with minute tolerances, process engineers calibrate and characterize a given process throughout its lifetime, and IC designers strive to model and characterize variability within their devices, libraries, and circuits. This dissertation focuses on the last of these three techniques and presents material relevant to managing variability within IC design. Since characterization and modeling are essential to the analysis and reduction of variation in modern-day designs, this dissertation begins by studying various correlation models used within Statistical Static Timing Analysis (SSTA). In the end, the study shows that using complex correlation models does not necessarily result in significant error reduction within SSTA, and that simple models (which only include die-to-die and random variation) can therefore be used to achieve similar accuracy with reduced overhead and run-time. Next, the variation models, themselves, are explored and a new critical dimension (CD) model is proposed which reduces standard deviation error in SSTA by ~3X. Finally, the focus changes from the timing analysis level and moves lower in the design hierarchy to the libraries and devices that comprise the backbone of IC design. The final three chapters study mechanical stress enhancement and discuss how to fully exploit the layout dependencies of mechanically stressed silicon. The first of these three chapters presents an optimization scheme that uses the layout dependencies of stress in conjunction with dual-threshold-voltage (Vth) assignment to decrease leakage power consumption by ~24%. Next, the second of the three chapters proposes a new standard cell library design methodology, called “STEEL.” STEEL provides average delay improvements of 11% over equivalent single-Vth implementations, while consuming 2.5X less leakage than the dual-Vth alternative. Finally, the stress enhanced studies (and this document) are concluded by a new optimization scheme that combines stress enhancement with gate length biasing to achieve 2.9X leakage power savings in IC designs without modifying Vth.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75947/1/btcline_1.pd