Backscatter Transponder Based on Frequency Selective Surface for FMCW Radar Applications

This paper describes an actively-controlled frequency selective surface (FSS) to implement a backscatter transponder. The FSS is composed by dipoles loaded with switching PIN diodes. The transponder exploits the change in the radar cross section (RCS) of the FSS with the bias of the diodes to modulate the backscattered response of the tag to the FMCW radar. The basic operation theory of the system is explained here. An experimental setup based on a commercial X-band FMCW radar working as a reader is proposed to measure the transponders. The transponder response can be distinguished from the interference of non-modulated clutter, modulating the transponder’s RCS. Some FSS with different number of dipoles are studied, as a proof of concept. Experimental results at several distances are provided

Design of an Ultra-wideband Radio Frequency Identification System with Chipless Transponders

The state-of-the-art commercially available radio-frequency identification (RFID) transponders are usually composed of an antenna and an application specific integrated circuit chip, which still makes them very costly compared to the well-established barcode technology. Therefore, a novel low-cost RFID system solution based on passive chipless RFID transponders manufactured using conductive strips on flexible substrates is proposed in this work. The chipless RFID transponders follow a specific structure design, which aim is to modify the shape of the impinged electromagnetic wave to embed anidentification code in it and then backscatter the encoded signal to the reader. This dissertation comprises a multidisciplinary research encompassing the design of low-cost chipless RFID transponders with a novel frequency coding technique, unlike usually disregarded in literature, this approach considers the communication channel effects and assigns a unique frequency response to each transponder. Hence, the identification codes are different enough, to reduce the detection error and improve their automatic recognition by the reader while working under normal conditions. The chipless RFID transponders are manufactured using different materials and state-of-the-art mass production fabrication processes, like printed electronics. Moreover, two different reader front-ends working in the ultra-wideband (UWB) frequency range are used to interrogate the chipless RFID transponders. The first one is built using high-performance off-theshelf components following the stepped frequency modulation (SFM) radar principle, and the second one is a commercially available impulse radio (IR) radar. Finally, the two readers are programmed with algorithms based on the conventional minimum distance and maximum likelihood detection techniques, considering the whole transponder radio frequency (RF) response, instead of following the commonly used approach of focusing on specific parts of the spectrum to detect dips or peaks. The programmed readers automatically identify when a chipless RFID transponder is placed within their interrogation zones and proceed to the successful recognition of its embedded identification code. Accomplishing in this way, two novel fully automatic SFM- and IRRFID readers for chipless transponders. The SFM-RFID system is capable to successfully decode up to eight different chipless RFID transponders placed sequentially at a maximum reading range of 36 cm. The IR-RFID system up to four sequentially and two simultaneously placed different chipless RFID transponders within a 50 cm range.:Acknowledgments Abstract Kurzfassung Table of Contents Index of Figures Index of Tables Index of Abbreviations Index of Symbols 1 Introduction 1.1 Motivation 1.2 Scope of Application 1.3 Objectives and Structure Fundamentals of the RFID Technology 2.1 Automatic Identification Systems Background 2.1.1 Barcode Technology 2.1.2 Optical Character Recognition 2.1.3 Biometric Procedures 2.1.4 Smart Cards 2.1.5 RFID Systems 2.2 RFID System Principle 2.2.1 RFID Features 2.3 RFID with Chipless Transponders 2.3.1 Time Domain Encoding 2.3.2 Frequency Domain Encoding 2.4 Summary Manufacturing Technologies 3.1 Organic and Printed Electronics 3.1.1 Substrates 3.1.2 Organic Inks 3.1.3 Screen Printing 3.1.4 Flexography 3.2 The Printing Process 3.3 A Fabrication Alternative with Aluminum or Copper Strips 3.4 Fabrication Technologies for Chipless RFID Transponders 3.5 Summary UWB Chipless RFID Transponder Design 4.1 Scattering Theory 4.1.1 Radar Cross-Section Definition 4.1.2 Radar Absorbing Material’s Principle 4.1.3 Dielectric Multilayers Wave Matrix Analysis 4.1.4 Frequency Selective Surfaces 4.2 Double-Dipoles UWB Chipless RFID Transponder 4.2.1 An Infinite Double-Dipole Array 4.2.2 Double-Dipoles UWB Chipless Transponder Design 4.2.3 Prototype Fabrication 4.3 UWB Chipless RFID Transponder with Concentric Circles 4.3.1 Concentric Circles UWB Chipless Transponder 4.3.2 Concentric Rings UWB Chipless RFID Transponder 4.4 Concentric Octagons UWB Chipless Transponders 4.4.1 Concentric Octagons UWB Chipless Transponder Design 1 4.4.2 Concentric Octagons UWB Chipless Transponder Design 2 4.5 Summary 5. RFID Readers for Chipless Transponders 5.1 Background 5.1.1 The Radar Range Equation 5.1.2 Range Resolution 5.1.3 Frequency Band Selection 5.2 Frequency Domain Reader Test System 5.2.1 Stepped Frequency Waveforms 5.2.2 Reader Architecture 5.2.3 Test System Results 5.3 Time Domain Reader 5.3.1 Novelda Radar 5.3.2 Test System Results 5.4 Summary Detection of UWB Chipless RFID Transponders 6.1 Background 6.2 The Communication Channel 6.2.1 AWGN Channel Modeling and Detection 6.2.2 Free-Space Path Loss Modeling and Normalization 6.3 Detection and Decoding of Chipless RFID Transponders 6.3.1 Minimum Distance Detector 6.3.2 Maximum Likelihood Detector 6.3.3 Correlator Detector 6.3.4 Test Results 6.4 Simultaneous Detection of Multiple UWB Chipless Transponders 6.5 Summary System Implementation 7.1 SFM-UWB RFID System with CR-Chipless Transponders 7.2 IR-UWB RFID System with COD1-Chipless Transponders 7.3 Summary Conclusion and Outlook References Publications Appendix A RCS Calculation Measurement Setups Appendix B Resistance and Skin Depth Calculation Appendix C List of Videos Test Videos Consortium Videos Curriculum Vita

UWB impulse radio for RFID

In recent years RFID has become more and more widespread and is being used in an ever growing number of applications. Current RFID technology does however face some difïculties in several possible new applications. A change in technology is needed and in this thesis we will examine a very promising candidate, namely Ultra wide band Impulse radio (UWB-IR). To verify the viability of this technology a test chip has been made in 90 nm CMOS process

Accuracy evaluation of probabilistic location methods in UWB-RFID systems

The present project is focused on investigating the achievable accuracy of classical location methods commonly used in wireless and proposing an alternative location method based on combining two of them. The first part of the project studies the advantages and disadvantages of extending Ultra Wideband and Radiofrequency Identification technologies on some classical location methods. As a result of the study and with the goal of improving accuracy in indoor radio propagation channels, the Received Strength Signal-based location method and the Time Difference Of Arrival-based location method are selected to be combined in the alternative location method, including the proper channel models. This combined location method takes advantage of the virtues of each location method and combines information in order to improve the estimation of one target's position when locating in indoor channel. The second part of the project is devoted to analyse and simulate the modified RSS, TDOA and Combined location methods, considering the randomness of a real multipath fading channel. Results show that the Combined location method performs always the best accuracy. Specifically in analytical study, the combined location method provides a deterministic error of 24 cm which represents an improvement of 54% and 15% of the RSS and TDOA accuracies respectively. In the simulated study, results show that it is able to improve the accuracy up to 46% and 85% of the RSS and TDOA respectively in specific evaluated points

SkinnySensor: Enabling Battery-Less Wearable Sensors Via Intrabody Power Transfer

Tremendousadvancement inultra-low powerelectronics and radiocommunica tionshas significantly contributed towards the fabrication of miniaturized biomedical sensors capable of capturing physiological data and transmitting them wirelessly. However, most of the wearable sensors require a battery for their operation. The battery serves as one of the critical bottlenecks to the development of novel wearable applications, as the limitations offered by batteries are affecting the development of new form-factors and longevity of wearable devices. In this work, we introduce a novel concept, namely Intra-Body Power Transfer (IBPT), to alleviate the limitations and problems associated with batteries, and enable wireless, batteryless wearable devices. The innovation of IBPT is to utilize the human body as the medium to transfer power to passive wearable devices, as opposed to employingon-boardbatteries for each individual device. The proposed platform eliminates the on-board rigid battery for ultra-low power and ultra-miniaturized sensors such that their form-factor can be flexible, ergonomically designed to be placed on small body parts. The platform also eliminates the need for battery maintenance (e.g., recharging or replacement) for multiple wearable devices other than the central power source. The performance of the developed system is tested and evaluated in comparison to traditional Radio Frequency based solutions that can be harmful to human interaction. The system developed is capable of harvesting on average 217µW at 0.43V and provides an average sleep/high impedance mode voltage of 4.5V

NFC Sensors Based on Energy Harvesting for IoT Applications

The availability of low-cost near-field communication (NFC) devices, the incorporation of NFC readers into most current mobile phones, and the inclusion of energy-harvesting (EH) capabilities in NFC chips make NFC a key technology for the development of green Internet of Things (IoT) applications. In this chapter, an overview of recent advances in the field of battery-less NFC sensors at 13.56 MHz is provided, and a comparison to other short-range RFID technologies is given. After reviewing power transfer in NFC, recommendations for the practical design of NFC-based sensor tags and NFC readers are made. A list of commercial NFC integrated circuits with energy-harvesting capabilities is also provided. A survey of recent battery-less NFC sensors developed by the group including soil moisture, water content, pH, color, and implanted NFC sensors is done

Accuracy evaluation of probabilistic location methods in UWB-RFID systems

The present project is focused on investigating the achievable accuracy of classical location methods commonly used in wireless and proposing an alternative location method based on combining two of them. The first part of the project studies the advantages and disadvantages of extending Ultra Wideband and Radiofrequency Identification technologies on some classical location methods. As a result of the study and with the goal of improving accuracy in indoor radio propagation channels, the Received Strength Signal-based location method and the Time Difference Of Arrival-based location method are selected to be combined in the alternative location method, including the proper channel models. This combined location method takes advantage of the virtues of each location method and combines information in order to improve the estimation of one target's position when locating in indoor channel. The second part of the project is devoted to analyse and simulate the modified RSS, TDOA and Combined location methods, considering the randomness of a real multipath fading channel. Results show that the Combined location method performs always the best accuracy. Specifically in analytical study, the combined location method provides a deterministic error of 24 cm which represents an improvement of 54% and 15% of the RSS and TDOA accuracies respectively. In the simulated study, results show that it is able to improve the accuracy up to 46% and 85% of the RSS and TDOA respectively in specific evaluated points