Synthesis of asynchronous controllers using integer linear programming

A novel strategy for the logic synthesis of asynchronous control circuits is presented. It is based on the structural theory of Petri nets and integer linear programming. Techniques that are capable of checking implementability conditions, such as complete state coding, and deriving a gate netlist to implement the specified behavior are presented. These techniques can handle Petri net specifications consisting of several thousands of transitions and provide a significant speed-up compared with techniques that have previously been proposed.Peer ReviewedPostprint (published version

Lazy transition systems: application to timing optimization of asynchronous circuits

The paper introduces Lazy Transitions Systems (LzTSs). The notion of laziness explicitly distinguishes between the enabling and the firing of an event in a transition system. LzTSs can be effectively used to model the behavior of asynchronous circuits in which relative timing assumptions can be made on the occurrence of events. These assumptions can be derived from the information known a priori about the delay of the environment and the timing characteristics of the gates that will implement the circuit. The paper presents necessary conditions to synthesize circuits with a correct behavior under the given timing assumptions. Preliminary results show that significant area and performance improvements can be obtained by exploiting the extra "don't care" space implicitly provided by the laziness of the events.Peer ReviewedPostprint (author's final draft

Synthesis of timed circuits based on decomposition

Journal ArticleAbstract-This paper presents a decomposition-based method for timed circuit design that is capable of significantly reducing the cost of synthesis. In particular, this method synthesizes each output individually. It begins by contracting the timed signal transition graph (STG) to include only transitions on the output of interest and its possible trigger signals. Next, the reachable state space for this contracted STG is analyzed to determine a minimal number of additional signals, which must be reintroduced into the STG to obtain complete state coding. The circuit for this output is then synthesized from this STG. Results show that the quality of the circuit implementation is nearly as good as the one found from the full reachable state space, but it can be applied to find circuits for which full-state-space methods cannot be successfully applied. The proposed method has been implemented as a part of our tool Nii-Utah Timed Asynchronous circuit Synthesis system (nutas), and its first version is available at http://research.nii.ac.jp/~yoneda

Synthesis of speed independent circuits based on decomposition

Journal ArticleThis paper presents a decomposition method for speedindependent circuit design that is capable of significantly reducing the cost of synthesis. In particular, this method synthesizes each output individually. It begins by contracting the STG to include only transitions on the output of interest and its trigger signals. Next, the reachable state space for this contracted STG is analyzed to determine a minimal number of additional signals which must be reintroduced into the STG to obtain CSC. The circuit for this output is then synthesized from this STG. Results show that the quality of the circuit implementation is nearly as good as the one found from the full reachable state space, but it can be applied to find circuits for which full state space methods cannot be successfully applied. The proposed method has been implemented as a part of our tool nutas (Nii-Utah Timed Asynchronous circuit Synthesis system), and its very first version is available at http://research.nii.ac.jp/~yoneda. Key Words: Decomposition, synthesis, STGs, abstraction, speed-independent circuits

Interpreted graph models

A model class called an Interpreted Graph Model (IGM) is defined. This class includes a large number of graph-based models that are used in asynchronous circuit design and other applications of concurrecy. The defining characteristic of this model class is an underlying static graph-like structure where behavioural semantics are attached using additional entities, such as tokens or node/arc states. The similarities in notation and expressive power allow a number of operations on these formalisms, such as visualisation, interactive simulation, serialisation, schematic entry and model conversion to be generalised. A software framework called Workcraft was developed to take advantage of these properties of IGMs. Workcraft provides an environment for rapid prototyping of graph-like models and related tools. It provides a large set of standardised functions that considerably facilitate the task of providing tool support for any IGM. The concept of Interpreted Graph Models is the result of research on methods of application of lower level models, such as Petri nets, as a back-end for simulation and verification of higher level models that are more easily manipulated. The goal is to achieve a high degree of automation of this process. In particular, a method for verification of speed-independence of asynchronous circuits is presented. Using this method, the circuit is specified as a gate netlist and its environment is specified as a Signal Transition Graph. The circuit is then automatically translated into a behaviourally equivalent Petri net model. This model is then composed with the specification of the environment. A number of important properties can be established on this compound model, such as the absence of deadlocks and hazards. If a trace is found that violates the required property, it is automatically interpreted in terms of switching of the gates in the original gate-level circuit specification and may be presented visually to the circuit designer. A similar technique is also used for the verification of a model called Static Data Flow Structure (SDFS). This high level model describes the behaviour of an asynchronous data path. SDFS is particularly interesting because it models complex behaviours such as preemption, early evaluation and speculation. Preemption is a technique which allows to destroy data objects in a computation pipeline if the result of computation is no longer needed, reducing the power consumption. Early evaluation allows a circuit to compute the output using a subset of its inputs and preempting the inputs which are not needed. In speculation, all conflicting branches of computation run concurrently without waiting for the selecting condition; once the selecting condition is computed the unneeded branches are preempted. The automated Petri net based verification technique is especially useful in this case because of the complex nature of these features. As a result of this work, a number of cases are presented where the concept of IGMs and the Workcraft tool were instrumental. These include the design of two different types of arbiter circuits, the design and debugging of the SDFS model, synthesis of asynchronous circuits from the Conditional Partial Order Graph model and the modification of the workflow of Balsa asynchronous circuit synthesis system.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo

State-based encoding of large asynchronous controllers

State encoding is one of the fundamental problems in the synthesis of asynchronous controllers. The requirement for a correct hazard-free implementation imposes severe constraints on the way encoding signals can be inserted in the specification of a controller. Even though some specification formalisms, such as Burst-mode machines or Signal Transition Graphs, enable to specify behaviors at the event level, the state encoding methods that provide the best good-quality solutions work at the state level. This imposes a severe limitation on the size of the controllers that can be handled by these methods. This paper proposes a method to solve the encoding problem for large asynchronous controllers using statebased methods. It is based on an iterative process of projection and re-composition that reduces the size specification by hiding signals, partially solves the encoding problem at the state level and re-composes the original specification using a synchronous product. The process iterates until all encoding conflicts have been solved. The method is proved to preserve the behavior of the specification (branching bisimilarity) and shown to be capable of providing good-quality solutions for controllers of more than 100 signals and 106 states.Peer ReviewedPostprint (published version

State encoding of asynchronous controllers using pseudo-boolean optimization

State encoding of asynchronous controllers is a challenging problem that faces a vast space of solutions. Subtle differences in the insertion of signals may result in significant variations in the complexity of the logic. This paper proposes a novel approach that models the encoding problem as Pseudo-Boolean formula. A cost function that estimates the complexity of the logic is incorporated, where the estimator of essential literals becomes one of the most important terms of the function. The new approach has been tested in 175 benchmarks with encoding conflicts, including 127 four-phase latch controllers. The presence of logic estimators in the formula contributes to an average reduction of 43% in literals when compared to a plain SAT version of the problem, at the expense of a longer runtime. When comparing to the region-based approach in petrify, an average reduction of 14% in literals is obtained.Peer ReviewedPostprint (author's final draft

Lazy transition systems and asynchronous circuit synthesis with relative timing assumptions

Journal ArticleThis paper presents a design flow for timed asynchronous circuits. It introduces lazy transitions systems as a new computational model to represent the timing information required for synthesis. The notion of laziness explicitly distinguishes between the enabling and the firing of an event in a transition system. Lazy transition systems can be effectively used to model the behavior of asynchronous circuits in which relative timing assumptions can be made on the occurrence of events. These assumptions can be derived from the information known a priori about the delay of the environment and the timing characteristics of the gates that will implement the circuit. The paper presents necessary conditions to generate circuits and a synthesis algorithm that exploits the timing assumptions for optimization. It also proposes a method for back-annotation that derives a set of sufficient timing constraints that guarantee the correctness of the circuit

Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award