A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Analysis, estimation and control for perturbed and singular systems and for systems subject to discrete events.

Annual technical report for grant AFOSR-88-0032.Investigators: Alan S. Willsky, George C. Verghese.Includes bibliographical references (p. [10]-[15]).Research supported by the AFOSR. AFOSR-88-003

Time-Delay Systems

Time delay is very often encountered in various technical systems, such as electric, pneumatic and hydraulic networks, chemical processes, long transmission lines, robotics, etc. The existence of pure time lag, regardless if it is present in the control or/and the state, may cause undesirable system transient response, or even instability. Consequently, the problem of controllability, observability, robustness, optimization, adaptive control, pole placement and particularly stability and robustness stabilization for this class of systems, has been one of the main interests for many scientists and researchers during the last five decades

Analysis, estimation and control for perturbed and singular systems for systems subject to discrete events.

"The principle investigator for this effort is Professor Alan S. Willsky, and Professor George C. Verghese is co-principal investigator."--P. [3].Includes bibliographical references (p. [20]-[25]).Final technical report for grant AFOSR-88-0032.Supported by the AFOSR. AFOSR-88-003

Analysis, filtering, and control for Takagi-Sugeno fuzzy models in networked systems

Copyright © 2015 Sunjie Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.The fuzzy logic theory has been proven to be effective in dealing with various nonlinear systems and has a great success in industry applications. Among different kinds of models for fuzzy systems, the so-called Takagi-Sugeno (T-S) fuzzy model has been quite popular due to its convenient and simple dynamic structure as well as its capability of approximating any smooth nonlinear function to any specified accuracy within any compact set. In terms of such a model, the performance analysis and the design of controllers and filters play important roles in the research of fuzzy systems. In this paper, we aim to survey some recent advances on the T-S fuzzy control and filtering problems with various network-induced phenomena. The network-induced phenomena under consideration mainly include communication delays, packet dropouts, signal quantization, and randomly occurring uncertainties (ROUs). With such network-induced phenomena, the developments on T-S fuzzy control and filtering issues are reviewed in detail. In addition, some latest results on this topic are highlighted. In the end, conclusions are drawn and some possible future research directions are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grants 61134009, 61329301, 11301118 and 61174136, the Natural Science Foundation of Jiangsu Province of China under Grant BK20130017, the Fundamental Research Funds for the Central Universities of China under Grant CUSF-DH-D-2013061, the Royal Society of the U.K., and the Alexander von Humboldt Foundation of Germany

Delay-dependent exponential stability of neutral stochastic delay systems

This paper studies stability of neutral stochastic delay systems by linear matrix inequality (LMI) approach. Delay dependent criterion for exponential stability is presented and numerical examples are conducted to verify the effectiveness of the proposed method

Estimation et commande des systèmes descripteurs

This thesis addresses the estimation and control for nonlinear descriptor systems. The developments are focused on a family of nonlinear descriptor models with a full-rank descriptor matrix. The proposed approaches are based on a Takagi-Sugeno (TS) descriptor representation of a given nonlinear descriptor model. This type of TS models is a generalization of the standard TS ones. One of the mains goals is to obtain conditions in terms of linear matrix inequalities (LMIs). In the existing literature, the observer design for TS descriptor models has led to bilinear matrix inequality (BMI) conditions. In addition, to the best of our knowledge, there are no results in the literature on controller/observer design for discrete-time TS descriptor models (with a non-constant and invertible descriptor matrix).Three problems have been addressed: state feedback controller design, observer design, and static output feedback controller design. LMI conditions have been obtained for both continuous and discrete-time TS descriptor models. In the continuous-time case, relaxed LMI conditions for the state feedback controller design have been achieved via parameterdependent LMI conditions. For the observer design, pure LMI conditions have been developed by using a different extended estimation error. For the static output feedback controller, LMI constraints can be obtained once an auxiliary matrix is fixed. In the discretetime case, results in the LMI form are provided for state/output feedback controller design and observer design; thus filling the gap in the literature. Several examples have been included to illustrate the applicability of the obtained results and the importance of keeping the original descriptor structure instead of computing a standard state-space.Cette thèse est consacrée au développement des techniques d’estimation et de commande pour systèmes descripteurs non linéaires. Les développements sont centrés sur une famille particulière de systèmes descripteurs non linéaires avec une matrice descripteur de rang plein. Toutes les approches présentées utilisent un formalisme de modélisation du type Takagi-Sugeno (TS) pour représenter les modèles descripteurs non linéaires. Un objectif très important est de développer des conditions sous la forme d’inégalités matricielles linéaires (LMI, en anglais). Dans la littérature, les conditions pour l’estimation des modèles TS descripteurs s’écrivent sous forme d’inégalités matricielles bilinéaires (BMI, en anglais). En plus, à notre connaissance, il n’y pas de résultats dans la littérature concernant la commande/estimation pour les modèles TS descripteurs en temps discret (avec une matrice descripteur régulière non linéaire).Trois problèmes ont été examinés : commande par retour d’état, estimation de l’état et commande statique par retour de la sortie. Dans le cas continu, des conditions moins conservatives ont été développées pour la commande par retour d’état. Pour l’estimation d’état, des conditions LMI ont été obtenues (au lieu des usuelles BMI) en utilisant un différent vecteur d’erreur augmenté. Pour la commande statique par retour de la sortie, des conditions LMI sont proposées si une matrice auxiliaire est fixée. Pour le temps discret, des nouveaux résultats sous la forme LMI ont été développées pour la commande/estimation, comblant ainsi certains manques de la littérature. Des exemples ont été inclus pour montrer l’applicabilité de tous les résultats que nous avons obtenus et ainsi l’importance de garder la structure originale des descripteurs